Panamorph ATH2 Owner's Manual - Introduction
ATH2 Owner’s Manual
.
1
Introduction
Congratulations, and thank you for purchasing a quality Panamorph product. Your ATH2 lens motor/sled is
outfitted with a custom mechanism designed exclusively for use in the home theater environment. No oil or
liquid based lubricants are used to assure the maximum cleanliness for optical components. Both lens and
drive will provide years of maintenance free service. The Panamorph system is built and tested in the USA
to the strictest quality standards and certifications.
Features and benefits:
Easy, straight forward installation and operation
Machined, high grade, anodized aluminum components
Repeatable precision positioning system
Flexible mounting options allowing table or ceiling mount
Speed selector for high or low speed operation
Configurable “lens in” position
Extra external IR sensor for remote mounting (if needed)
Input 12V jack for automatic lens trigger
Output 12V jack for screen masking trigger
Non mechanical long life optical stop sensors
Dry operating precision linear bearings
Custom built, high precision, low current NEMA 23 stepper motor
Custom built, low noise stepper drive circuitry and firmware
Endurance tested to over 2,000,000 traversals
8 button long range remote control (up to 50 feet) with discrete functions
Backlit logo with on/off lighting control
Reversible logo plates
Completely maintenance free
USA built and tested
FCC, CE, and UL certified
©
Panamorph Inc January 2009 – All rights reserved
Page
3