Panasonic CY-VRP112T1 Operating Instructions Manual - Ce Regulatory Notice
10
CE Regulatory Notice
Herewith confirm to comply with the requirements set out in the
Council Directives on the Approximation of the Laws of the Member
States relating Electromagnetic Compatibility of Radio and Telecom
device (1995/5/EC); the Low Voltage Directive (2006/95/EC); the
Restriction of The Use of Certain Hazardous Substances in
Electrical And Electronic Equipment Directive (2002/95/EC), Turkish
EEE Directive; the Commission Regulation (EC) No 1275/2008
implementing Directive 2005/32/EC of the European Parliament and
of the Council with regard to eco-design requirements for standby
and off mode electric power consumption of electrical and electronic
household and office equipment, and the Directive 2009/125/EC of
the European parliament and of the council establishing a
framework for the setting of eco-design requirements for
energy-related products.
Notes on Installation
1.
Install the device near the rear-view mirror to obtain the best
open-field view. Do NOT install the camcorder in a location that will
obstruct your required driving view.
2.
Make sure that the lens is within the wiping range of the windscreen
wiper to ensure a clear view even when it rains.
3.
Do not touch the lens with your fingers. Finger grease may be left
on the lens and will result in unclear videos or snapshots. Clean the
lens on a regular basis.
4.
Do not install the device on a tinted window. Doing so may damage
the tint film.
5.
Make sure that the installation position is not hindered by the tinted
window.
6.
In order to avoid the ripple in the LCD screen due to the car
engine vibration , suggest the driver to shift the gear to N
Position for the temporary stop.