Panasonic CY-VRP112T1 Operating Instructions Manual - 3.1 Recording Videos
21
3 Using the Car Recorder
3.1 Recording Videos
3.1.1 Record videos while driving
When the vehicle engine starts up and the Automatic Record
function is enabled, the camcorder automatically turns on and starts
recording.
Recording will automatically stop when the engine is switched off.
Or, press the
button to stop recording manually.
Note:
On some cars, the recording will continue when the engine is switched off.
If this happens, do one of the following:
- Manually turn off the cigarette lighter.
- Remove the car adapter from the cigarette lighter.
3.1.2 Driver Fatigue Alert
1.
Press the
button to enter the OSD menu.
2.
Press the
/
button to select Driver Fatigue Alert and
press the
button.
3.
Press the
/
button to select On and press the
button.
Driver Fatigue Alert function will remind the driver should take a
rest after continuing to drive for over one hour via ‘’ bi bi sound ‘’
from the device and also the alert
picture ( as enclosed ) will be appear in
the LCD screen. The product will remind
the driver again after 30 minutes as
each interval . But the product will
recalculate the alert time If the car stop
moving over 5 minutes .