Panasonic CY-VRP112T1 Operating Instructions Manual - 2.3 Connecting To Power
of
43
17
2.3 Connecting to Power
Use only the exclusive car adapter to power up the device and
charge the built-in battery.
1.
Connect one end of the car adapter to the USB connector of
the camcorder.
2.
Plug the other end of the car charger to the cigarette lighter
socket of your vehicle. Once the vehicle engine is started, the
camcorder automatically powers on.
Note:
1. The orange LED lights up while the battery is charging.
2. Please take note if the environment temperature reaches 45°C or above, the car
adapter still can supply power to camcorder, but it will not charge the battery. This is
the characteristic of Lithium polymer battery and is not a malfunction.