Panasonic DMP-BD77 Owner's Manual - page 13
13
VQT3V18
If you have more than one Panasonic player/
recorder and the remote control operates both
products at once, you will
need to change the remote control code to
prevent this occurrence. (> 26, “Remote Control
Code”)
Occasionally, Panasonic may release updated
firmware for this unit that may add or improve the
way a feature operates. These updates are
available free of charge.
This unit is capable of checking the firmware
automatically when connected to the Internet via
a broadband connection.
When a new firmware version is available, the
following message is displayed.
To update the firmware
Press [HOME] > select “Setup” > select
“Player Settings” > select “System Settings”
> select “Firmware Update” > select “Update
Now”
DO NOT DISCONNECT the unit from the AC
power or perform any operation while the update
takes place.
After the firmware is installed, “FINISH” will be
displayed on the unit’s display. Unit will restart
and the following screen will be displayed.
≥ If downloading on this unit fails or this unit is not
connected to the Internet, then you can download the
latest firmware from the following website and burn it
to a CD-R to update the firmware.
http://panasonic.jp/support/global/cs/
(This site is in English only.)
To show the firmware version on this unit.
(> 26, “System Information”)
≥ Downloading will require several minutes. It may take
longer or may not work properly depending on the
connection environment.
≥ If you do not want to check for the latest firmware version,
set “Automatic Update Check” to “Off”. (> 26)
Reprogramming the
remote control
Firmware updates
New firmware is available.
Please update firmware in Setup.
The firmware was updated.
Current Version
:
x.xx
RETURN
OK
C
o
nn
e
c
ti
o
ns
&
S
e
tt
in
g
s
DMP-BD87_77_VQT3V18_eng.book 13 ページ 2011年10月24日 月曜日 午後2時45分