1. DL manuals
  2. Panasonic
  3. Copier
  4. DP-1510P
  5. Service Manual

Panasonic DP-1510P Service Manual

Manual is about: Digital Imaging Systems

Summary of DP-1510P

  • Page 1

    Order number: mgcs011201c0 h21 (h22 for usa) digital imaging systems dp-1510p / 1810p / 1810f / 2010e this service information is designed for experienced repair technicians only and is not intended for use by the general public. It does not contain warnings or cautions to advise non-technical indiv...

  • Page 2

    2 the contents of this service manual are subject to change without notice. Published in japan..

  • Page 3

    Table of contents 3 specifications table ................................ 5 1.1. Copy function...........................................5 1.2. Fax, printer and internet fax functions ................................................14 1.3. System combination...............................23 1.4. Opt...

  • Page 4

    Table of contents 4 schematic diagram ............................. 406 9.1. General circuit diagram system circuit....................................................406 9.2. Sc pc board ........................................411 9.3. Lpc3 pc board ....................................441 9.4. Adf ...

  • Page 5: 1 Specifications Table

    5 dp-1510p/1810p /1810f/2010e apr 2002 edition 2.0 1 specifications table note: dp-1510p/2010e model is limited to certain destinations only. 1.1. Copy function items description remarks dp-1510p dp-1810p dp-1810f dp-2010e basic specifications 1 type desktop 2 platen fixed 3 original position left /...

  • Page 6

    6 apr 2002 edition 2.0 dp-1510p/1810p /1810f/2010e 17 paper feed front loading universal paper tray paper tray capacity 550 sheets x 1 (dp-2010e-pu: 550 sheets x 2) ltr / a4 : 20 lb (75 g/m 2 ) auto size setting no (input from control panel) low paper warning empty only sheet bypass capacity 50 shee...

  • Page 7

    7 dp-1510p/1810p /1810f/2010e apr 2002 edition 2.0 29 weight 91 lb (41 kg) 99 lb (45 kg) 113 lb (51kg) main unit only. For usa and canada 91 lb (41 kg) 99 lb (45 kg) 93 lb (42 kg) for other destinations options 1 paper feed system max. 550 sheets x 2 max. 550 sheets x 4 550 sheets 2nd/4th paper feed...

  • Page 8

    8 apr 2002 edition 2.0 dp-1510p/1810p /1810f/2010e 10 paper transport unit no 11 automatic duplex unit no yes 12 counter key counter capability no only the harness kit is supplied as an option kit. 13 dehumidifier option supplied as a service part. 14 electronic sorting board no standard (8 mb) for ...

  • Page 9

    9 dp-1510p/1810p /1810f/2010e apr 2002 edition 2.0 centering mode no mirror mode no image overlay mode no others (inverting adf & adu) no yes 2-page copy mode yes ldr → ltr x 2 (a3 → a4 x 2, b4 → b5 x 2) 2 in 1 yes 1 → 2 no 4 in 1 no 1 → 4 no booklet mode no copy from 4 single-sided pages to 1 bookl...

  • Page 10

    10 apr 2002 edition 2.0 dp-1510p/1810p /1810f/2010e check / slip mode no copy account display mode no 3 control panel display 20 x 2 alphanumeric lcd status lamp no yes no key original size yes copy size yes keypad yes clear yes stop yes start yes energy saver yes multi size feed no same widths only...

  • Page 11

    11 dp-1510p/1810p /1810f/2010e apr 2002 edition 2.0 error code yes finishing no warning indicators add toner no (led indication only) toner waste container full yes add paper (no paper) no (led indication only) add paper yes paper jam indication no (led indication only) paper jam location no (led in...

  • Page 12

    12 apr 2002 edition 2.0 dp-1510p/1810p /1810f/2010e developer life n/a toner waste container yes dehumidifier yes supplied as a service part manual add toner no toner bottle replacement 7 feeder system paper tray (standard / option) paper size setting method universal & fixed by screw change paper s...

  • Page 13

    13 dp-1510p/1810p /1810f/2010e apr 2002 edition 2.0 pm cycle 1 major pm 120 k 2 minor pm (cleaning) 60 k packing configuration 1 packing dimension 28.9 x 30.1 x 23.4 in (735 x 765 x 595 mm) 28.9 x 30.1 x 25.6 in (735 x 765 x 650 mm) 28.9 x 30.1 x 31.9 in (735 x 765 x 810 mm) main unit only. For usa ...

  • Page 14

    14 apr 2002 edition 2.0 dp-1510p/1810p /1810f/2010e 1.2. Fax, printer and internet fax functions 1.2.1. Fax function note: dp-1810f model only. Items description remarks dp-1810f main specifications 1 compatibility g3 itu-t std & non-std (mgcs) 2 pstn line port yes (1) 3 leased line port no 4 v.24 l...

  • Page 15

    15 dp-1510p/1810p /1810f/2010e apr 2002 edition 2.0 printer mechanism 1 recording method lp 2 recording speed 18 ppm (a4 horizontal) 3 recording resolution fax 406 x 391 dpi 4 recording paper size ledger / legal / letter / a3 / b4 / a4 / a5 / inv-r ledger size is transmitted as a3 size for n. Americ...

  • Page 16

    16 apr 2002 edition 2.0 dp-1510p/1810p /1810f/2010e 14 pulse to tone change yes 15 flash key yes 16 handset option transmission features 1 direct transmission yes 2 memory transmission yes page retransmission 3 quick memory transmission yes 4 multi-station transmission (sequential broadcasting) yes ...

  • Page 17

    17 dp-1510p/1810p /1810f/2010e apr 2002 edition 2.0 polling 1 polling yes 2 turnaround polling no 3 multi-station polling yes max. 190 stations 4 deferred polling yes max. 50 timers 5 deferred multi-station polling yes max. 50 timers / 190 stations 6 direct polling tx no 7 memory polling tx yes 1 fi...

  • Page 18

    18 apr 2002 edition 2.0 dp-1510p/1810p /1810f/2010e special communications 1 password xmt / rcv yes 2 selective reception no tsi check 3 relay xmt request no 4 relay xmt center no 5 confidential xmt / polling no 6 confidential center no 7 mailbox xmt / polling yes 8 mailbox center yes max. 20 mailbo...

  • Page 19

    19 dp-1510p/1810p /1810f/2010e apr 2002 edition 2.0 1.2.2. Printer function items description remarks dp-1510p dp-1810p dp-1810f dp-2010e interface 1 centronics parallel i/f (ieee-1284) centronics parallel interface ecp 2 lan (network) ethernet 10base-t/ 100base-tx requires the optional internet fax...

  • Page 20

    20 apr 2002 edition 2.0 dp-1510p/1810p /1810f/2010e scanning function 1 halftone 256 halftone shades, gray scale (local connection) lan : 256 halftone shades with error diffusion. Requires the optional internet fax kit. 2 max. Document size ledger, a3 3 scanning resolution 600 dpi (max) 150 dpi (gra...

  • Page 21

    21 dp-1510p/1810p /1810f/2010e apr 2002 edition 2.0 1.2.3. Internet fax function note: dp-1810f model only. Items description remarks dp-1810f main specifications 1 communication protocols tcp / ip smtp / mime 2 max. Modem speed na 3 coding scheme mh / mmr 400 dpi : mmr only 4 ecm no 5 line interfac...

  • Page 22

    22 apr 2002 edition 2.0 dp-1510p/1810p /1810f/2010e 3 internet fax server features internet fax relay xmt yes ifax → ifax → g3fax email relay mxt yes pc → ifax → g3fax received fax / email forward yes local print available pc to fax transmission no inbound routing yes using sub-address. Local print ...

  • Page 23

    23 dp-1510p/1810p /1810f/2010e apr 2002 edition 2.0 1.3. System combination for dp-1510p/1810p document sensor and motor scanner unit 10/100 ethernet interface option main pc board (sc pc board) pcl6 emulation kit (pdl pc board) image memory 8, 16, 64,128m either option parallel port interface lpc3 ...

  • Page 24

    24 apr 2002 edition 2.0 dp-1510p/1810p /1810f/2010e for dp-1810f document sensor motor scanner unit 10/100 ethernet interface (internet fax) option main pc board (sc pc board) pcl6 emulation kit (pdl pc board) image memory memory card 8, 16, 128m 2, 4, 8m either option either option parallel port in...

  • Page 25

    25 dp-1510p/1810p /1810f/2010e apr 2002 edition 2.0 for dp-2010e document sensor motor scanner unit 10/100 ethernet interface option main pc board (sc pc board) pcl6 emulation kit (pdl pc board) image memory 8, 16, 128m either option parallel port interface lpc3 pc board 2nd paper feed module i-adf,...

  • Page 26

    26 apr 2002 edition 2.0 dp-1510p/1810p /1810f/2010e 1.4. Option and supply lists 1.4.1. Options 1.4.2. Supplies part name part number remarks 10/100 ethernet interface da-ne200 available in specified destinations pcl6 emulation kit da-pc210 image memory (8mb) da-sm08b only one module can be installe...

  • Page 27

    27 dp-1510p/1810p /1810f/2010e apr 2002 edition 2.0 1.5. External view for dp-1510p/1810p/2010e 10 mm 10 mm 10 mm (588 ) 23.1 in 18.0 in (458 ) 16.1 in (410 ) t fac8932-00 (605 ) 23.8 in 10 mm front view right view left view bottom view top view rear view manufacturer's name and address factory id p...

  • Page 28

    28 apr 2002 edition 2.0 dp-1510p/1810p /1810f/2010e for dp-1810f bottom view manufacturer's name and address factory id product complies with dhhs rules 21 cfr subchapter j in effect at date of manufacture. (for usa only) 10 mm (588 ) 23.1 in 10 mm 20.6 in (522 ) (605 ) 23.8 in 10 mm caution ! This ...

  • Page 29

    29 dp-1510p/1810p /1810f/2010e apr 2002 edition 2.0 1.5.1. Serial number contents the contents of the 11-digit serial number is as follows: 2 3 4 5 6 1 sequential production number 5-digit sequential production number 00001 ~ 99999 = 1 ~ 99,999 units a0001 ~ y9999 = 100,000 ~ 329,976 units (letters ...

  • Page 30

    30 apr 2002 edition 2.0 dp-1510p/1810p /1810f/2010e 1.6. Control panel dp-1510p for euro and other destinations dp-1810p for usa and canada for other destinations.

  • Page 31

    31 dp-1510p/1810p /1810f/2010e apr 2002 edition 2.0 dp-1810f for all destinations dp-2010e for usa and canada for other destinations.

  • Page 32: 2 Disassembly Instructions

    32 apr 2002 edition 2.0 dp-1510p/1810p /1810f/2010e 2 disassembly instructions 2.1. General disassembly flowchart adf unit cover assembly lsu (710) left side cover (104) ac power cord (1502) 2-2-1 2-2-2 2-2-3 2-2-6 2-2-15 separation rubber (428) paper feed roller (679) pre feed roller (420) adf pc b...

  • Page 33

    33 dp-1510p/1810p /1810f/2010e apr 2002 edition 2.0 left platen cover (113) right platen cover (112) scanner unit glass l assembly (117) glass s (116) thermistor assembly (944) thermostat (947) thermal fuse (948) scanner lamp (501) scanning motor (131) inverter pc board (564) fpc cable (547) 2-2-5 r...

  • Page 34

    34 apr 2002 edition 2.0 dp-1510p/1810p /1810f/2010e process unit toner waste container opc drum (1001) bias charge roller (1036) scoop sheet (1033) cleaning blade assembly (1035) front & rear cleaning felt (1031, 1032) cleaning sponge (1030) 2-2-16 feed roller (1213) 2-2-14 reverse clutch (1212) c25...

  • Page 35

    35 dp-1510p/1810p /1810f/2010e apr 2002 edition 2.0 2.2. Disassembly instructions 2.2.1. Power cord, recording paper tray, process unit (1) turn the power switch to the off (o) position. (2) disconnect the ac power cord (1502). (3) remove the paper tray. (4) open the right cover (601). (5) open the ...

  • Page 36

    36 apr 2002 edition 2.0 dp-1510p/1810p /1810f/2010e 2.2.2. Adf unit (1) open the adf cover (418) and release the adf cover stopper (414). (2) remove the pad cover (427). (3) remove the separation rubber (428). (4) 2 screws (19). (5) remove the adf cover (418). (6) disconnect the adf harness (1836). ...

  • Page 37

    37 dp-1510p/1810p /1810f/2010e apr 2002 edition 2.0 (11) remove roller holder (430) assembly. (12) remove the paper feed shaft assembly (433). Note: when re-installing, make sure that the roller holder (430) assembly is properly placed on the adf unit. (13) remove paper feed roller (679) and d26 d g...

  • Page 38

    38 apr 2002 edition 2.0 dp-1510p/1810p /1810f/2010e note: when re-installing the adf rear cover (301), make sure that the adf harness is properly placed as shown in the illustration. (17) 1 screw (19). (18) remove the adf pc board cover (453). (19) release the clamp from adf unit. Note: do not cut t...

  • Page 39

    39 dp-1510p/1810p /1810f/2010e apr 2002 edition 2.0 (26) disconnect 5 harnesses (1836, 1837, 1838, 1839, 1840) on the adf pc board. (6 connectors) (27) 2 screws (19). (28) remove the adf pc board (1406). (29) release the harness from the clamp. (30) disconnect 2 harnesses (1836, 1838). (31) 7 screws...

  • Page 40

    40 apr 2002 edition 2.0 dp-1510p/1810p /1810f/2010e (35) remove 2 drive belts (444, 445). (36) remove the s27 pulley (443). (37) remove the bushing (410). (38) remove the snap ring (b9). (39) remove the s27 pulley (443). (40) remove the bushing (410). (41) release the clips and remove the switch (72...

  • Page 41

    41 dp-1510p/1810p /1810f/2010e apr 2002 edition 2.0 (52) 5 screws (19). (53) remove the center bracket (452). (54) release the np actuator spring (408). (55) remove the np actuator (407). (56) disconnect the harness (1837). (2 connectors) (57) remove the photo sensor (604). (58) remove the photo sen...

  • Page 42

    42 apr 2002 edition 2.0 dp-1510p/1810p /1810f/2010e (1) open the adf cover. (2) release the stopper. (3) clean the separation rubber, feed roller, pre feed roller and paper feed roller with a soft cloth, saturated with isopropyl alcohol. (1) lift the original tray. (2) clean the exit roller with a s...

  • Page 43

    43 dp-1510p/1810p /1810f/2010e apr 2002 edition 2.0 2.2.3. Cover assembly (1) 3 screws (19). (2) release the 3 latch hooks and remove the front cover (101). (3) remove the inner j cover (103). (4) 4 silver screws (b1). (5) remove the left side cover (104). (6) 7 screws (19). (7) remove the rear plat...

  • Page 44

    44 apr 2002 edition 2.0 dp-1510p/1810p /1810f/2010e (14) remove the right cover stopper (625). (15) remove the front arm (657). (16) remove the right cover (601) assembly. Note: remove the front fulcrum (a) and then pushing the right cover (601) assembly toward the rear, remove the rear fulcrum. (14...

  • Page 45

    45 dp-1510p/1810p /1810f/2010e apr 2002 edition 2.0 2.2.4. Control panel unit (1) 2 silver screws (b1). (2) 2 screws (19). (3) release 2 latch hooks and remove the control panel assembly. (4) disconnect the harness (1801) on the pnl6 pc board (cn201). (5) disconnect the harness. (6) 1 screw (19). (7...

  • Page 46

    46 apr 2002 edition 2.0 dp-1510p/1810p /1810f/2010e (12) 1 screw (19). (13) remove the panel bracket (233). (14) disconnect the harness (1852) on the pnl6 pc board (cn1). Note: during re-assembly, reconnect this harness to pnl6 pc board prior to securing the board with the screws. (15) 2 screws (7b)...

  • Page 47

    47 dp-1510p/1810p /1810f/2010e apr 2002 edition 2.0 2.2.5. Scanner unit (1) 2 silver screws (b1). (2) remove 2 angle plates (305). (3) open the adf unit. (4) 3 silver screws (b1). (5) remove the left platen cover (113). (6) 3 silver screws (b1). (7) remove the right platen cover (112). (8) 2 screws ...

  • Page 48

    48 apr 2002 edition 2.0 dp-1510p/1810p /1810f/2010e (11) remove the control panel unit (refer to 2.2.4.). (12) 5 screws (19). (13) remove the f/r scanner frame (532). (14) move the lamp base bracket. (15) 2 screws (19). (16) remove 2 lamp plate springs (524). (17) disconnect harness on the lfb pc bo...

  • Page 49

    49 dp-1510p/1810p /1810f/2010e apr 2002 edition 2.0 (22) 2 screws (19). (23) remove the inverter pc board (564). (24) 2 screws (19). (25) remove lfb pc board (1414) assembly and lfb pc board (1414). (26) disconnect the harness on the lfb pc board. (27) remove 2 sliders on the connectors. (28) remove...

  • Page 50

    50 apr 2002 edition 2.0 dp-1510p/1810p /1810f/2010e (32) remove the rear cover and rear plate. (refer to 2.2.3.) (33) remove the e-ring (5y). (34) remove the synchronous belt (118). (35) remove the mxl34 pulley (119). (36) 3 screws (19). (37) disconnect the harness (1807) on the scanning motor. (38)...

  • Page 51

    51 dp-1510p/1810p /1810f/2010e apr 2002 edition 2.0 (42) release the harnesses from the clamps. (43) disconnect the harness (1805). (44) disconnect the harness (1803). (45) 1 screw (19). (46) remove the front platen frame bracket (127). (47) 1 screw (19). (48) remove the rear platen frame bracket (1...

  • Page 52

    52 apr 2002 edition 2.0 dp-1510p/1810p /1810f/2010e 2.2.6. Lsu, fan, lvps, htc pc board (1) 2 screws (19). (2) disconnect 2 harnesses (1809, 1824). (3 connectors) (3) remove the lsu (710). Note: do not touch the red screw (a) of lsu damper as illustrated. Note: when re-installing the lsu, put the la...

  • Page 53

    53 dp-1510p/1810p /1810f/2010e apr 2002 edition 2.0 (9) 1 screw (e5). (10) disconnect the harness (1814). (11) remove the fan (808). (12) 3 screws (19). (13) remove the lower fan bracket (805). (14) disconnect the harness (1830) on the lvps (cn60). (15) disconnect 2 harnesses (1812, 1822) on the lvp...

  • Page 54

    54 apr 2002 edition 2.0 dp-1510p/1810p /1810f/2010e (19) 6 screws (19). (20) remove the lvps (1404). Note: when re-installing the lvps, install the upper 4 screws first and then the remaining 2 screws. (21) disconnect all harnesses on the htc pc board (cn760, cn761, cn762, cn764, cn765, cn766 and cn...

  • Page 55

    55 dp-1510p/1810p /1810f/2010e apr 2002 edition 2.0 2.2.7. Ils, fan (1) 2 screws (e6). (2) remove 2 micro switch (813) and disconnect 2 harnesses (1823). (3) 1 screw (24). (4) remove the 3 fly wheels (1101). Note: when re-installing the fly wheels, make sure that the imprinted marks are facing outwa...

  • Page 56

    56 apr 2002 edition 2.0 dp-1510p/1810p /1810f/2010e 2.2.8. Sc pc board, lpc3 pc board, mjr pc board (for dp-1810f only) (1) disconnect 2 harnesses (1866, 1867) (2) 2 screws (19). (3) remove the mjr pc board (1421). (4) remove the locking spacer (824). (5) disconnect all harnesses on the sc pc board ...

  • Page 57

    57 dp-1510p/1810p /1810f/2010e apr 2002 edition 2.0 note: when re-installing the sc pc board. (9) release 2 latch hooks and remove the card guide (816). (10) move 2 lock springs as illustrated. (11) 2 screws (20). (12) reinstall the card guide (816) as illustrated. (13) position the memory ground pl...

  • Page 58

    58 apr 2002 edition 2.0 dp-1510p/1810p /1810f/2010e 2.2.9. Drive motor, hvps, solenoid, drive unit (1) release the harness (1818) from the clamp. (2) disconnect the harness (1818) on the drive motor assembly. (3) 4 screws (19). (4) remove the drive motor. (1) remove 3 fly wheels. (refer to 2.2.7.) (...

  • Page 59

    59 dp-1510p/1810p /1810f/2010e apr 2002 edition 2.0 (12) 2 screws (19). (13) remove the cst cover (716) assembly. (14) release the solenoid harness from 2 clamps. (15) remove the rear plate. (refer to 2.2.3.) (16) release the solenoid harness from clamp and disconnect it. (17) 2 screws (19). (18) re...

  • Page 60

    60 apr 2002 edition 2.0 dp-1510p/1810p /1810f/2010e (19) 2 screws (19). (20) remove the solenoid assembly. (21) 1 screw (19). (22) remove the solenoid (1102). (23) 2 screws (19). (24) remove the fan assembly. (25) push down the latch hook with a straight edge screwdriver. (26) remove the fuser actua...

  • Page 61

    61 dp-1510p/1810p /1810f/2010e apr 2002 edition 2.0 (27) disconnect the harnesses (1229, 1856) on the lpc3 pc board. (28) release the harness (1818) from the clamp. (29) disconnect the harness (1818) on the drive motor assembly. (30) 4 screws (19). (31) remove the drive unit. Caution: do not remove ...

  • Page 62

    62 apr 2002 edition 2.0 dp-1510p/1810p /1810f/2010e (4) install the gear and the snap ring. (5) install the other gear and snap ring. (5) (4).

  • Page 63

    63 dp-1510p/1810p /1810f/2010e apr 2002 edition 2.0 2.2.10. Ac inlet (1) 1 silver screw (b1). (2) remove the inlet cover (751). (3) 2 screws (35). (4) disconnect 2 harnesses (1828). (5) remove the ac inlet assembly. (6) disconnect the harness (1842). (7) remove the ac inlet (807). (1) (3) (2) (5) (4...

  • Page 64

    64 apr 2002 edition 2.0 dp-1510p/1810p /1810f/2010e 2.2.11. Fuser unit (1) open the right cover (601) assembly. (2) 2 screws (19). (3) remove the front connector cover (714). (4) remove the rear connector cover (713). (5) 2 screws (4n). (6) remove 2 harnesses (1829). (7) remove 2 harnesses (1813). (...

  • Page 65

    65 dp-1510p/1810p /1810f/2010e apr 2002 edition 2.0 (14) remove the fuser lamp (924). Note: do not touch the glass portion of the fuser lamp with bare hands. Grease from finger prints will shorten its life cycle, use isopropyl alcohol to clean finger prints. (15) remove the snap ring (b9). (16) remo...

  • Page 66

    66 apr 2002 edition 2.0 dp-1510p/1810p /1810f/2010e (21) 2 screws (g5). (22) remove the exit upper guide (901). (23) remove 2 pressure springs (952). (24) remove the pressure roller (914). (25) remove the exit lower guide (902). (21) (21) (22) (23) (23) (24) (25).

  • Page 67

    67 dp-1510p/1810p /1810f/2010e apr 2002 edition 2.0 (1) clean the separators with a soft cloth, saturated with isopropyl alcohol. (2) clean 2 separation hr sheets with a soft cloth, saturated with isopropyl alcohol. (26) remove 3 separator springs (953). (27) remove 5 separators (923). (28) remove t...

  • Page 68

    68 apr 2002 edition 2.0 dp-1510p/1810p /1810f/2010e (30) 1 screw (23). (31) 1 screw (19). (32) release the stopper and disconnect the harness. (33) remove the harness guide (906). (1) clean the thermistor assembly (944) with a soft cloth, saturated with isopropyl alcohol. (2) clean the thermostat (9...

  • Page 69

    69 dp-1510p/1810p /1810f/2010e apr 2002 edition 2.0 (40) 5 screws (19). (41) remove the roller bracket (909). Note: when re-installing, install the screw a first, then the remaining 4 screws. (42) remove the fuser roller (913). (43) remove 2 c-rings (938). (44) remove the e39 d gear (935). (45) remo...

  • Page 70

    70 apr 2002 edition 2.0 dp-1510p/1810p /1810f/2010e 2.2.12. Registration roller, toner sensor (1) remove the rear cover. (refer to 2.2.3.) (2) remove 3 fly wheels. (refer to 2.2.7.) (3) remove the hvps, snap ring and clutch. (refer to 2.2.9.) (4) remove the snap ring (b9). (5) remove the registratio...

  • Page 71

    71 dp-1510p/1810p /1810f/2010e apr 2002 edition 2.0 (14) 1 screw (19). (15) disconnect the harness (1827). (16) remove the toner sensor spring (1148). (17) remove the toner sensor (1147). (18) disconnect the harness (1827). (19) remove 2 photo sensors (604). (14) (16) (15) (17) (19) (18) (19) (18).

  • Page 72

    72 apr 2002 edition 2.0 dp-1510p/1810p /1810f/2010e 2.2.13. Bias transfer roller transfer roller and pinch roller> (1) clean the registration roller, duplex transfer roller and pinch roller with soft cloth, saturated with isopropyl alcohol. (2) clean the bias transfer roller with soft dry cloth. (3)...

  • Page 73

    73 dp-1510p/1810p /1810f/2010e apr 2002 edition 2.0 (8) 2 screws (c8). (9) remove the btr guide (642). (10) release 2 latch hooks and remove the btr gear (644). (11) remove the bias transfer roller (648). Note: when re-installing the bias transfer roller (648), make sure that the springs are on both...

  • Page 74

    74 apr 2002 edition 2.0 dp-1510p/1810p /1810f/2010e (14) remove the cleaner roller (640). (14).

  • Page 75

    75 dp-1510p/1810p /1810f/2010e apr 2002 edition 2.0 2.2.14. Paper feed module and c25 gear roller> clean the paper feed roller and c25 gear roller with soft cloth, saturated with isopropyl alcohol. (1) release the latch hook and remove the c25 gear roller (1207) and reverse clutch (1212). (2) remove...

  • Page 76

    76 apr 2002 edition 2.0 dp-1510p/1810p /1810f/2010e (2) clean the intermediate roller (1617). Note: 3rd/4th paper feed modules are as the same steps (1)~(2). (2).

  • Page 77

    77 dp-1510p/1810p /1810f/2010e apr 2002 edition 2.0 2.2.15. Lift motor assembly (1) remove 3 fly wheels. (refer to 2.2.7.) (2) remove the hvps. (refer to 2.2.9.) (3) disconnect the harness on the lpc3 pc board (cn706). (4) release the harness from the clamps. (5) 2 screws (19). (6) remove the lift m...

  • Page 78

    78 apr 2002 edition 2.0 dp-1510p/1810p /1810f/2010e 2.2.16. Process unit (1) open the right cover. (2) open the front door cover. (3) remove the toner waste container by slowly pulling it towards the left as illustrated. (4) seal the container with the enclosed cap and dispose of it properly. (5) li...

  • Page 79

    79 dp-1510p/1810p /1810f/2010e apr 2002 edition 2.0 (8) unlock the front opc bushing assembly (1003, 1023) by turning it clockwise. (9) push the opc drum forward from the rear end as illustrated. (10) remove the front opc bushing assembly (1003, 1023). (11) lift the opc drum (1001) as illustrated, h...

  • Page 80

    80 apr 2002 edition 2.0 dp-1510p/1810p /1810f/2010e note: when re-installing the bias charge roller holder assembly, install the charge holder (1037) first as shown in (a) and then the charge bushing (1038) with the charge spring (1039) as shown in (b). (14) remove the scoop sheet (1033). (15) 2 bla...

  • Page 81

    81 dp-1510p/1810p /1810f/2010e apr 2002 edition 2.0 note: 1. When re-installing, install 2 cl sponges (1030) first as shown in (a), then the cl blade assembly (1035) next as shown in (b), then the front cl felt (1031) and rear cl felt (1032) as shown in (c) and lastly attach the scoop sheet (1033) a...

  • Page 82

    82 apr 2002 edition 2.0 dp-1510p/1810p /1810f/2010e (22) remove the mag roller joint (1047). (23) remove the charge plate d (1059). (24) remove the mag roller stopper (1046) by gently pushing it downwards. (25) remove the mag roller (1048). Note: 1.Do not touch the surface of the mag roller. 2.When ...

  • Page 83

    83 dp-1510p/1810p /1810f/2010e apr 2002 edition 2.0 (29) remove 2 developer felts (1041). (29).

  • Page 84

    84 apr 2002 edition 2.0 dp-1510p/1810p /1810f/2010e 2.2.17. Duplex feed roller (for dp-2010e only) (1) 2 screws (c8). (2) remove the transfer guide (639) assembly. (3) 4 screws (19). (4) remove the duplex guide 3 (675). (5) 5 screws (19). (6) remove the duplex guide 1 (602) assembly. (7) disconnect ...

  • Page 85

    85 dp-1510p/1810p /1810f/2010e apr 2002 edition 2.0 (9) remove 2 e15 d gears (607). (10) remove 2 snap rings (b9). (11) remove 2 duplex feed rollers (609). (12) remove 2 bushings (611) and 2 washers (610). (9) (10) (11) (12) (13) (13).

  • Page 86

    86 apr 2002 edition 2.0 dp-1510p/1810p /1810f/2010e 2.3. Screw identification template 18 19 23 20 24 35 36 xyn3+l6 xtb3+8j xyn3+f8 xtb3+f8 xyn4+f8 xyn4+f6 xyn3+f6 1y xtb3+10j 7b b1 xtb26+6j dzpb000007 4n xsn3+w8pc 6a xtb3+12j 62 xtb3+6j 1n xtb4+8j ref no. Part no. Figure remark screw screw screw sc...

  • Page 87

    87 dp-1510p/1810p /1810f/2010e apr 2002 edition 2.0 ref no. Part no. Figure remark screw screw shoulder screw d24 dzpa000013 e5 xtb3+32j e6 xtb3+24j g5 ffpfa0107b c8 xtw3+8sfc c2 dzpb000020 screw screw red screw.

  • Page 88

    88 apr 2002 edition 2.0 dp-1510p/1810p /1810f/2010e 3 maintenance, adjustments and check points 3.1. Required tools 3.2. Periodic maintenance points no. Tool no. Tool 1 soft cloth 7 pliers 2 isopropyl alcohol 8 cotton swab 3 phillips screwdriver (#2) 9 brush 4 stubby phillips screwdriver (#2) 10 ks-...

  • Page 89

    89 dp-1510p/1810p /1810f/2010e apr 2002 edition 2.0 3.2.1. Periodic maintenance points part description 3.2.2. Periodic maintenance method no. Part name no. Part name 1 roller, feed (409) 16 roller, bias transfer (648) 2 roller, paper feed (679) 17 roller, registration (1162) 3 roller, pre feed (420...

  • Page 90

    90 apr 2002 edition 2.0 dp-1510p/1810p /1810f/2010e 3.3. Periodic maintenance check list for a detailed periodic maintenance check list. Mechanical parts ref. No. Cleaning replacement/adjustment ref. Counter cycle (sheet) method cycle (sheet) procedure adf unit exit roller 316 60k alcohol - refer to...

  • Page 91

    91 dp-1510p/1810p /1810f/2010e apr 2002 edition 2.0 note the maintenance cycle is based on the counter information for each individual module. To verify the counter information, print the total counter list using the service mode: f9 - 03 (print device info.) - 02 (counter information) front cleanin...

  • Page 92

    92 apr 2002 edition 2.0 dp-1510p/1810p /1810f/2010e 3.4. Updating the firmware this machine is equipped with an f-rom (flash rom). F-rom offers the flexibility of quick and easy firmware updates, creation of a master firmware card, backup and restore of firmware and machine parameters. The following...

  • Page 93

    93 dp-1510p/1810p /1810f/2010e apr 2002 edition 2.0 3.4.2. Updating the host firmware using the master firmware card a. When a 4 mb flash memory card was used 1. Before starting, print the f5 & f6 parameters (copier) lists. 2. Turn the power switch to the off (o) position. 3. Install the appropriate...

  • Page 94

    94 apr 2002 edition 2.0 dp-1510p/1810p /1810f/2010e 3.4.3. Updating the host firmware using a pc via the parallel port 1. Before starting, print the f5 & f6 parameters (copier) lists. 2. Connect the machine to the pc with a parallel printer cable. 3. Install the panasonic firmware programming wizard...

  • Page 95

    95 dp-1510p/1810p /1810f/2010e apr 2002 edition 2.0 3.4.6. Erasing the master firmware card 1. Turn the power switch to the off (o) position. 2. Install the master firmware card into the machine. 3. Turn the power switch to the on (i) position. 4. Press “function”, “original size” keys and then key ...

  • Page 96

    96 apr 2002 edition 2.0 dp-1510p/1810p /1810f/2010e 3.5. Glossary of electrical abbreviations glossary of electrical abbreviations signal name description +12v +12 vdc power supply +24v +24 vdc power supply +24vd1 +24 vdc power supply +24vf +24 vdc power supply +24vm +24 vdc power supply +24vopf +24...

  • Page 97

    97 dp-1510p/1810p /1810f/2010e apr 2002 edition 2.0 al[2] address signal al[3] address signal al[4] address signal al[5] address signal al[6] address signal al[7] address signal al[8] address signal al[9] address signal batvol battery voltage bat/buzclk battery voltage buzzer clock bba[0] s-dram mem...

  • Page 98

    98 apr 2002 edition 2.0 dp-1510p/1810p /1810f/2010e bmd[25] data signal bmd[26] data signal bmd[27] data signal bmd[28] data signal bmd[29] data signal bmd[3] data signal bmd[30] data signal bmd[31] data signal bmd[37] data signal bmd[38] data signal bmd[4] data signal bmd[5] data signal bmd[6] data...

  • Page 99

    99 dp-1510p/1810p /1810f/2010e apr 2002 edition 2.0 data1 data signal data2 data signal data3 data signal data4 data signal data5 data signal data6 data signal data7 data signal development development signal (high voltage) dr0 development control ac+dc output drclk lsu clock fck1 shift register clo...

  • Page 100

    100 apr 2002 edition 2.0 dp-1510p/1810p /1810f/2010e kin[7] key scan signal l+5v laser circuit +5 vdc power supply l1 line signal l1 (r) ground l2 line signal l2 (t) line transformer input signal laserpow laser power control ldbthp toner bottle hp sensor signal ldcst2 photo sensor dc drive voltage l...

  • Page 101

    101 dp-1510p/1810p /1810f/2010e apr 2002 edition 2.0 nadf2 2nd paper tray feed roller drive signal naejc original eject detection signal nakeep1 reversing 1 guide solenoid control signal nakeep2 reversing 1 guide solenoid control signal nang platen cover angle naoac adf cover open detection signal n...

  • Page 102

    102 apr 2002 edition 2.0 dp-1510p/1810p /1810f/2010e ncton ring detection signal ndadfon adf option detection signal ndupkep2 duplex keep solenoid drive signal ndupsen1 duplex sensor1 signal nesen inner under tray paper exit signal nfault data available / error condition (peripheral → host) nfdpchk2...

  • Page 103

    103 dp-1510p/1810p /1810f/2010e apr 2002 edition 2.0 nmrclh2 2nd paper tray intermediate roller clutch drive signal noe read enable nopb1 option detection signal nopb2 option detection signal nopb3 option detection signal nopdup duplex unit option detection nopon option detection signal noprt toner ...

  • Page 104

    104 apr 2002 edition 2.0 dp-1510p/1810p /1810f/2010e nweh high enable nwel write low enable outa motor control signal outb motor control signal pab1sn adf cover open detection signal padf2a 2nd feed roller drive signal padf3a 3rd feed roller drive signal padf4a 4th feed roller drive signal pbthp pho...

  • Page 105

    105 dp-1510p/1810p /1810f/2010e apr 2002 edition 2.0 pnltxd transmission signal pop1rst reset signal pop2rst reset signal pop3rst reset signal ppdlreq direct memory access data request signal puplimit2 2nd lift dc motor ready signal puplimit3 3rd lift dc motor ready signal puplimit4 4th lift dc moto...

  • Page 106

    106 apr 2002 edition 2.0 dp-1510p/1810p /1810f/2010e vout1 graphic data output vout2 graphic data output vpp2 not used glossary of electrical abbreviations signal name description.

  • Page 107

    107 dp-1510p/1810p /1810f/2010e apr 2002 edition 2.0 3.6. Sc pc board cn3 sc pcb pin no. Signal name destination signal waveform function cn3-1 +5vp adf pcb cn21-1 +5 vdc power supply cn3-2 mgnd adf pcb cn21-2 ground cn3-3 gnd adf pcb cn21-3 ground cn3-4 +24v adf pcb cn21-4 +24 vdc power supply cn3-...

  • Page 108

    108 apr 2002 edition 2.0 dp-1510p/1810p /1810f/2010e cn3-12 nab1sn adf pcb cn21-12 read point detection signal l: detect cn3-13 naejc adf pcb cn21-13 original eject detection signal l: detect cn3-14 narev adf pcb cn21-14 adf exit cover open detection signal l: detect cn3-15 naoac adf pcb cn21-15 adf...

  • Page 109

    109 dp-1510p/1810p /1810f/2010e apr 2002 edition 2.0 cn3-23 naclh3 adf pcb cn21-23 inverting roller clutch control signal cn3-24 naclockad1 adf pcb cn21-24 adf motor control clock signal cn3-25 nastroad1 adf pcb cn21-25 adf motor control strobe signal cn3-26 padata1a adf pcb cn21-26 adf motor contro...

  • Page 110

    110 apr 2002 edition 2.0 dp-1510p/1810p /1810f/2010e cn8 cn3-35 gnd adf pcb cn21-35 ground cn3-36 ndadfon adf pcb cn21-36 adf option detection signal h: adf option installed l: i-adf option installed cn3-37 +24v adf pcb cn21-37 +24 vdc power supply cn3-38 mgnd adf pcb cn21-38 ground cn3-39 +5v adf p...

  • Page 111

    111 dp-1510p/1810p /1810f/2010e apr 2002 edition 2.0 cn9 cn10 cn8-6 noutb stepping motor motor control signal sc pcb pin no. Signal name destination signal waveform function cn9-1 nflon inv pcb cn1-1 inverter ground cn9-2 flng inv pcb cn1-2 inverter control signal cn9-3 +24v inv pcb cn1-3 +24 vdc po...

  • Page 112

    112 apr 2002 edition 2.0 dp-1510p/1810p /1810f/2010e cn100 cn10-7 nori home position sensor home position detection signal cn10-8 gnd home position sensor ground sc pcb pin no. Signal name destination signal waveform function cn100-1 nsta lpc3 pcb cn704-1 status signal cn100-2 nsclk lpc3 pcb cn704-2...

  • Page 113

    113 dp-1510p/1810p /1810f/2010e apr 2002 edition 2.0 cn101 cn100-9 nhsync lpc3 pcb cn704-9 horizontal synchronous signal cn100-10 gnd lpc3 pcb cn704-10 ground cn100-11 nfeed lpc3 pcb cn704-11 feed signal cn100-12 gnd lpc3 pcb cn704-12 ground cn100-13 plprst lpc3 pcb cn704-13 lp reset signal h: reset...

  • Page 114

    114 apr 2002 edition 2.0 dp-1510p/1810p /1810f/2010e cn101-4 mgnd lvps pcb cn61-4 ground cn101-5 mgnd lvps pcb cn61-5 ground cn101-6 mgnd lvps pcb cn61-6 ground cn101-7 +5v lvps pcb cn61-7 +5 vdc power supply cn101-8 +5v lvps pcb cn61-8 +5 vdc power supply cn101-9 gnd lvps pcb cn61-9 ground cn101-10...

  • Page 115

    115 dp-1510p/1810p /1810f/2010e apr 2002 edition 2.0 cn104 cn101-16 nlpow1 lvps pcb cn61-16 energy saver mode control signal sc pcb pin no. Signal name destination signal waveform function cn104-1 gnd flash memory card ground cn104-2 d3 flash memory card data signal cn104-3 d4 flash memory card data...

  • Page 116

    116 apr 2002 edition 2.0 dp-1510p/1810p /1810f/2010e cn104-11 a9 flash memory card address signal cn104-12 a8 flash memory card address signal cn104-13 a13 flash memory card address signal cn104-14 a14 flash memory card address signal cn104-15 nwel flash memory card write low enable h: write disable...

  • Page 117

    117 dp-1510p/1810p /1810f/2010e apr 2002 edition 2.0 cn104-22 a7 flash memory card address signal cn104-23 a6 flash memory card address signal cn104-24 a5 flash memory card address signal cn104-25 a4 flash memory card address signal cn104-26 a3 flash memory card address signal cn104-27 a2 flash memo...

  • Page 118

    118 apr 2002 edition 2.0 dp-1510p/1810p /1810f/2010e cn104-33 nweh flash memory card high enable h: disable l: enable cn104-34 gnd flash memory card ground cn104-35 gnd flash memory card ground cn104-36 ncd flash memory card flash card id h: card not installed l: card installed cn104-37 d11 flash me...

  • Page 119

    119 dp-1510p/1810p /1810f/2010e apr 2002 edition 2.0 cn104-44 rsv flash memory card not used cn104-45 rsv flash memory card not used cn104-46 a17 flash memory card address signal cn104-47 a18 flash memory card address signal cn104-48 a19 flash memory card address signal cn104-49 a20 flash memory car...

  • Page 120

    120 apr 2002 edition 2.0 dp-1510p/1810p /1810f/2010e cn104-56 n.C. Flash memory card not used cn104-57 rsv flash memory card not used cn104-58 nrst flash memory card reset signal h: not reset l: reset cn104-59 nmb8 flash memory card memory version detection signal cn104-60 rsv flash memory card not ...

  • Page 121

    121 dp-1510p/1810p /1810f/2010e apr 2002 edition 2.0 cn106 cn104-67 nid0 flash memory card flash card id cn104-68 gnd flash memory card ground sc pcb pin no. Signal name destination signal waveform function cn106-1 agnd ccd pcb cn51-9 ground cn106-2 agnd ccd pcb cn51-10 ground cn106-3 vout2 ccd pcb ...

  • Page 122

    122 apr 2002 edition 2.0 dp-1510p/1810p /1810f/2010e cn108 sc pcb pin no. Signal name destination signal waveform function cn108-1 +24v pnl6-1 pcb cn201-1 +24 vdc power supply cn108-2 +5vp pnl6-1 pcb cn201-2 +5 vdc pilot power supply, that provides power to the active components during the sleep mod...

  • Page 123

    123 dp-1510p/1810p /1810f/2010e apr 2002 edition 2.0 cn110 cn111 (except dp-1510p/1810p) cn108-12 npsave pnl6-1 pcb cn201-12 energy saver mode transport signal cn108-13 batvol pnl6-1 pcb cn201-13 battery voltage cn108-14 nslpky pnl6-1 pcb cn201-14 sleep key signal cn108-15 +5vprst pnl6-1 pcb cn201-1...

  • Page 124

    124 apr 2002 edition 2.0 dp-1510p/1810p /1810f/2010e cn113 cn111-3 gnd mjr pcb cn25-2 ground cn111-4 +24v mjr pcb cn25-3 +24 vdc power supply cn111-5 pcmld mjr pcb cn25-4 line switching relay drive signal cn111-6 -8 n.C. Not used cn111-9 nhkof mjr pcb cn25-5 external phone off-hook detection signal ...

  • Page 125

    125 dp-1510p/1810p /1810f/2010e apr 2002 edition 2.0 cn113-3 bmd[1] sdrm data signal cn113-4 bmd[2] sdrm data signal cn113-5 bmd[3] sdrm data signal cn113-6 bmd[4] sdrm data signal cn113-7 bmd[5] sdrm data signal cn113-8 bmd[6] sdrm data signal cn113-9 bmd[7] sdrm data signal cn113-10 +3.3v sdrm +3....

  • Page 126

    126 apr 2002 edition 2.0 dp-1510p/1810p /1810f/2010e cn113-14 bma[2] sdrm address signal cn113-15 bma[3] sdrm address signal cn113-16 bma[4] sdrm address signal cn113-17 bma[5] sdrm address signal cn113-18 bma[6] sdrm address signal cn113-19 bma[10] sdrm address signal cn113-20 bma[11] sdrm address ...

  • Page 127

    127 dp-1510p/1810p /1810f/2010e apr 2002 edition 2.0 cn113-25 bmd[12] sdrm data signal cn113-26 bmd[13] sdrm data signal cn113-27 bmd[14] sdrm data signal cn113-28 bma[7] sdrm address signal cn113-29 bma[12] sdrm address signal cn113-30 +3.3v sdrm +3.3 vdc power supply cn113-31 bma[8] sdrm address s...

  • Page 128

    128 apr 2002 edition 2.0 dp-1510p/1810p /1810f/2010e cn113-36 nbdqml sdrm input/output mask signal cn113-37 bmd[37] sdrm data signal cn113-38 bmd[38] sdrm data signal cn113-39 gnd sdrm ground cn113-40 n.C. Sdrm not used cn113-41 n.C. Sdrm not used cn113-42 nbcs[2] sdrm chip select signal cn113-43 nb...

  • Page 129

    129 dp-1510p/1810p /1810f/2010e apr 2002 edition 2.0 cn113-48 nbcas sdrm s-dram column address strobe command cn113-49 bmd[18] sdrm data signal cn113-50 bmd[19] sdrm data signal cn113-51 bmd[20] sdrm data signal cn113-52 bmd[21] sdrm data signal cn113-53 bmd[22] sdrm data signal cn113-54 bmd[23] sdr...

  • Page 130

    130 apr 2002 edition 2.0 dp-1510p/1810p /1810f/2010e cn113-59 bmd[27] sdrm data signal cn113-60 bmd[28] sdrm data signal cn113-61 +3.3v sdrm +3.3 vdc power supply cn113-62 bmd[29] sdrm data signal cn113-63 bmd[30] sdrm data signal cn113-64 bmd[31] sdrm data signal cn113-65 bdclk[1] sdrm s-dram acces...

  • Page 131

    131 dp-1510p/1810p /1810f/2010e apr 2002 edition 2.0 cn114 (except dp-1510p/1810p) cn120 cn113-68 smemid[0] sdrm memory id cn113-69 smemid[1] sdrm cn113-70 smemid[2] sdrm cn113-71 smemid[3] sdrm cn113-72 gnd sdrm ground sc pcb pin no. Signal name destination signal waveform function cn114-1 l2 (t) m...

  • Page 132

    132 apr 2002 edition 2.0 dp-1510p/1810p /1810f/2010e cn121 cn120-3 gnd ccd pcb cn51-6 ground cn120-4 fsh ccd pcb cn51-7 transfer gate clock cn120-5 n.C. Not used cn120-6 fr ccd pcb cn51-8 reset gate clock cn120-7 n.C. Not used cn120-8 fcp ccd pcb cn51-5 clamp clock cn120-9 fck1 ccd pcb cn51-3 shift ...

  • Page 133

    133 dp-1510p/1810p /1810f/2010e apr 2002 edition 2.0 cn121-2 +5vi ep pcb cn1-2 +5 vdc power supply cn121-3 al[1] ep pcb cn1-3 address signal cn121-4 al[2] ep pcb cn1-4 address signal cn121-5 al[5] ep pcb cn1-5 address signal cn121-6 al[6] ep pcb cn1-6 address signal cn121-7 al[9] ep pcb cn1-7 addres...

  • Page 134

    134 apr 2002 edition 2.0 dp-1510p/1810p /1810f/2010e cn121-13 niowrh ep pcb cn1-13 i/o write (high) signal h: write disable l: write enable cn121-14 gnd ep pcb cn1-14 ground cn121-15 n.C. Ep pcb cn1-15 not used cn121-16 n.C. Ep pcb cn1-16 not used cn121-17 n.C. Ep pcb cn1-17 not used cn121-18 n.C. E...

  • Page 135

    135 dp-1510p/1810p /1810f/2010e apr 2002 edition 2.0 cn121-24 iod[9] ep pcb cn1-24 data signal cn121-25 iod[12] ep pcb cn1-25 data signal cn121-26 iod[13] ep pcb cn1-26 data signal cn121-27 n.C. Ep pcb cn1-27 not used cn121-28 n.C. Ep pcb cn1-28 not used cn121-29 n.C. Ep pcb cn1-29 not used cn121-30...

  • Page 136

    136 apr 2002 edition 2.0 dp-1510p/1810p /1810f/2010e cn121-36 npdlopt ep pcb cn1-36 option detection signal h: option not installed l: option installed cn121-37 ppdlreq ep pcb cn1-37 direct memory access data request signal h: enable l: disable cn121-38 n.C. Ep pcb cn1-38 not used cn121-39 pd[0] ep ...

  • Page 137

    137 dp-1510p/1810p /1810f/2010e apr 2002 edition 2.0 cn121-47 pd[12] ep pcb cn1-47 data signal cn121-48 pd[13] ep pcb cn1-48 data signal cn121-49 gnd ep pcb cn1-49 ground cn121-50 gnd ep pcb cn1-50 ground cn121-51 gnd ep pcb cn1-51 ground cn121-52 gnd ep pcb cn1-52 ground cn121-53 al[3] ep pcb cn1-5...

  • Page 138

    138 apr 2002 edition 2.0 dp-1510p/1810p /1810f/2010e cn121-58 al[12] ep pcb cn1-58 address signal cn121-59 n.C. Ep pcb cn1-59 not used cn121-60 n.C. Ep pcb cn1-60 not used cn121-61 niord ep pcb cn1-61 i/o read signal h: read disable l: read enable cn121-62 niowrl ep pcb cn1-62 i/o write (low) signal...

  • Page 139

    139 dp-1510p/1810p /1810f/2010e apr 2002 edition 2.0 cn121-69 iod[6] ep pcb cn1-69 data signal cn121-70 iod[7] ep pcb cn1-70 data signal cn121-71 iod[10] ep pcb cn1-71 data signal cn121-72 iod[11] ep pcb cn1-72 data signal cn121-73 iod[14] ep pcb cn1-73 data signal cn121-74 iod[15] ep pcb cn1-74 dat...

  • Page 140

    140 apr 2002 edition 2.0 dp-1510p/1810p /1810f/2010e cn121-80 n.C. Ep pcb cn1-80 not used cn121-81 nopon ep pcb cn1-81 option detection signal h: option not installed l: option installed cn121-82 n.C. Ep pcb cn1-82 not used cn121-83 n.C. Ep pcb cn1-83 not used cn121-84 gnd ep pcb cn1-84 ground cn121...

  • Page 141

    141 dp-1510p/1810p /1810f/2010e apr 2002 edition 2.0 cn123 cn121-92 pd[7] ep pcb cn1-92 data signal cn121-93 gnd ep pcb cn1-93 ground cn121-94 gnd ep pcb cn1-94 ground cn121-95 pd[10] ep pcb cn1-95 data signal cn121-96 pd[11] ep pcb cn1-96 data signal cn121-97 pd[14] ep pcb cn1-97 data signal cn121-...

  • Page 142

    142 apr 2002 edition 2.0 dp-1510p/1810p /1810f/2010e cn123-2 +5vi g3b pcb cn131-2 or lanb pcb cn2-2 +5 vdc power supply cn123-3 al[1] g3b pcb cn131-3 or lanb pcb cn2-3 address signal cn123-4 al[2] g3b pcb cn131-4 or lanb pcb cn2-4 address signal cn123-5 al[5] g3b pcb cn131-5 or lanb pcb cn2-5 addres...

  • Page 143

    143 dp-1510p/1810p /1810f/2010e apr 2002 edition 2.0 cn123-12 ncs0e g3b pcb cn131-12 or lanb pcb cn2-12 chip enable signal h: disable l: enable cn123-13 niowrh g3b pcb cn131-13 or lanb pcb cn2-13 i/o write (high) signal h: write disable l: write enable cn123-14 gnd g3b pcb cn131-14 or lanb pcb cn2-1...

  • Page 144

    144 apr 2002 edition 2.0 dp-1510p/1810p /1810f/2010e cn123-22 iod[5] g3b pcb cn131-22 or lanb pcb cn2-22 data signal cn123-23 iod[8] g3b pcb cn131-23 or lanb pcb cn2-23 data signal cn123-24 iod[9] g3b pcb cn131-24 or lanb pcb cn2-24 data signal cn123-25 iod[12] g3b pcb cn131-25 or lanb pcb cn2-25 da...

  • Page 145

    145 dp-1510p/1810p /1810f/2010e apr 2002 edition 2.0 cn123-32 n.C. G3b pcb cn131-32 or lanb pcb cn2-32 not used cn123-33 +5vp g3b pcb cn131-33 or lanb pcb cn2-33 +5 vdc pilot power supply, that provides power to the active components during the sleep mode. Cn123-34 +24vf g3b pcb cn131-34 or lanb pcb...

  • Page 146

    146 apr 2002 edition 2.0 dp-1510p/1810p /1810f/2010e cn123-42 al[12] g3b pcb cn131-42 or lanb pcb cn2-42 address signal cn123-43 ncs09 g3b pcb cn131-43 or lanb pcb cn2-43 chip enable signal h: disable l: enable cn123-44 ncs0a g3b pcb cn131-44 or lanb pcb cn2-44 chip enable signal h: disable l: enabl...

  • Page 147

    147 dp-1510p/1810p /1810f/2010e apr 2002 edition 2.0 cn123-52 iod[3] g3b pcb cn131-52 or lanb pcb cn2-52 data signal cn123-53 iod[6] g3b pcb cn131-53 or lanb pcb cn2-53 data signal cn123-54 iod[7] g3b pcb cn131-54 or lanb pcb cn2-54 data signal cn123-55 iod[10] g3b pcb cn131-55 or lanb pcb cn2-55 da...

  • Page 148

    148 apr 2002 edition 2.0 dp-1510p/1810p /1810f/2010e cn220 cn123-62 n.C. G3b pcb cn131-62 or lanb pcb cn2-62 not used cn123-63 npsdes g3b pcb cn131-63 or lanb pcb cn2-63 energy saver mode disable signal cn123-64 n.C. G3b pcb cn131-64 or lanb pcb cn2-64 not used cn123-65 nopon g3b pcb cn131-65 or lan...

  • Page 149

    149 dp-1510p/1810p /1810f/2010e apr 2002 edition 2.0 cn220-4 data2 centronics i/f data signal cn220-5 data3 centronics i/f data signal cn220-6 data4 centronics i/f data signal cn220-7 data5 centronics i/f data signal cn220-8 data6 centronics i/f data signal cn220-9 data7 centronics i/f data signal c...

  • Page 150

    150 apr 2002 edition 2.0 dp-1510p/1810p /1810f/2010e cn220-15 not used centronics i/f not used cn220-16 gnd centronics i/f ground cn220-17 fg centronics i/f ground cn220-18 plh centronics i/f +5v pull up cn220-19 gnd centronics i/f ground cn220-20 gnd centronics i/f ground cn220-21 gnd centronics i/...

  • Page 151

    151 dp-1510p/1810p /1810f/2010e apr 2002 edition 2.0 cn220-27 gnd centronics i/f ground cn220-28 gnd centronics i/f ground cn220-29 gnd centronics i/f ground cn220-30 gnd centronics i/f ground cn220-31 ninit centronics i/f reverse request / initialize (host → peripheral) cn220-32 nfault centronics i...

  • Page 152

    152 apr 2002 edition 2.0 dp-1510p/1810p /1810f/2010e 3.7. Pnl6-1 pc board cn1 pnl6-1 pcb pin no. Signal name destination signal waveform function cn1-1 scn[2] pnl2 pcb cn20-1 key scan signal cn1-2 scn[1] pnl2 pcb cn20-2 key scan signal cn1-3 scn[3] pnl2 pcb cn20-3 key scan signal cn1-4 scn[0] pnl2 p...

  • Page 153

    153 dp-1510p/1810p /1810f/2010e apr 2002 edition 2.0 cn1-11 kin[4] pnl2 pcb cn20-11 key scan signal cn1-12 pled[1] pnl2 pcb cn20-12 led data h: on cn1-13 kin[3] pnl2 pcb cn20-13 key scan signal cn1-14 pled[0] pnl2 pcb cn20-14 led data h: on cn1-15 kin[1] pnl2 pcb cn20-15 key scan signal cn1-16 pled[...

  • Page 154

    154 apr 2002 edition 2.0 dp-1510p/1810p /1810f/2010e cn201 refer to sc pc board cn108. Cn1-22 swct1 pnl2 pcb cn20-22 one touch choice h: on cn1-23 kin[2] pnl2 pcb cn20-23 key scan signal cn1-24 blcnt2 pnl2 pcb cn20-24 led control h: on cn1-25 scn[5] pnl2 pcb cn20-25 key scan signal cn1-26 tlcnt pnl2...

  • Page 155

    155 dp-1510p/1810p /1810f/2010e apr 2002 edition 2.0 cn202 cn203 pnl6-1 pcb pin no. Signal name destination signal waveform function cn202-1 bat/buzclk pnl6-2 pcb cn210-1 battery voltage buzzer clock cn202-2 gnd pnl6-2 pcb cn210-2 ground cn202-3 scn[6] pnl6-2 pcb cn210-3 key scan signal cn202-4 scn[...

  • Page 156

    156 apr 2002 edition 2.0 dp-1510p/1810p /1810f/2010e cn203-6 nledct[0] pnl6-2 pcb cn211-6 led control cn203-7 nledct[1] pnl6-2 pcb cn211-7 led control cn203-8 nledct[2] pnl6-2 pcb cn211-8 led control cn203-9 nledct[3] pnl6-2 pcb cn211-9 led control cn203-10 nledct[4] pnl6-2 pcb cn211-10 led control ...

  • Page 157

    157 dp-1510p/1810p /1810f/2010e apr 2002 edition 2.0 3.8. Pnl6-2 pc board cn210 refer to pnl6-1 pc board cn202. Cn211 refer to pnl6-1 pc board cn203..

  • Page 158

    158 apr 2002 edition 2.0 dp-1510p/1810p /1810f/2010e 3.9. Pnl2 pc board cn20 refer to pnl6-1 pc board cn1..

  • Page 159

    159 dp-1510p/1810p /1810f/2010e apr 2002 edition 2.0 3.10. Lpc3 pc board cn701 lpc3 pcb pin no. Signal name destination signal waveform function cn701-1 l+5v lsu cn811-1 laser circuit +5 vdc power supply cn701-2-4 n.C. Not used cn701-5 ns/h lsu cn811-3 sample hold signal cn701-6 nhsync lsu cn811-4 h...

  • Page 160

    160 apr 2002 edition 2.0 dp-1510p/1810p /1810f/2010e cn702 cn701-14 npmon lsu cn3-3 polygon motor rotation signal cn701-15 mgnd lsu cn3-4 ground cn701-16 +24v lsu cn3-5 +24 vdc power supply lpc3 pcb pin no. Signal name destination signal waveform function cn702-1 +24vm hvps cn800-1 +24 vdc power sup...

  • Page 161

    161 dp-1510p/1810p /1810f/2010e apr 2002 edition 2.0 cn703 cn704 refer to sc pc board cn100. Cn705 lpc3 pcb pin no. Signal name destination signal waveform function cn703-1 +24v ils pc board (interlock switch) +24 vdc power supply cn703-2 n.C. Not used cn703-3 +24vd1 ils pc board (interlock switch) ...

  • Page 162

    162 apr 2002 edition 2.0 dp-1510p/1810p /1810f/2010e cn705-8 nrsen registration sensor registration sensor signal cn705-9 gnd registration sensor ground cn705-10 ldrsen registration sensor photo sensor dc drive voltage cn705-11 npchk1 paper sensor 1st paper tray paper detection signal l: detect cn70...

  • Page 163

    163 dp-1510p/1810p /1810f/2010e apr 2002 edition 2.0 cn706 cn707 lpc3 pcb pin no. Signal name destination signal waveform function cn706-1 +24vm lift motor +24 vdc power supply cn706-2 nlift1 lift motor lift dc motor ready signal lpc3 pcb pin no. Signal name destination signal waveform function cn70...

  • Page 164

    164 apr 2002 edition 2.0 dp-1510p/1810p /1810f/2010e cn708 cn709 cn710 lpc3 pcb pin no. Signal name destination signal waveform function cn708-1 therm1 thermistor-1 thermistor output signal cn708-2 therm2 thermistor-2 ground cn708-3 nesen paper exit sensor-1 inner under tray paper exit signal cn708-...

  • Page 165

    165 dp-1510p/1810p /1810f/2010e apr 2002 edition 2.0 cn711 cn710-3 +24v lvps cn62-3 +24 vdc power supply cn710-4 mgnd lvps cn62-4 ground cn710-5 mgnd lvps cn62-5 ground cn710-6 mgnd lvps cn62-6 ground lpc3 pcb pin no. Signal name destination signal waveform function cn711-1 +5v sns pcb-1 +5 vdc powe...

  • Page 166

    166 apr 2002 edition 2.0 dp-1510p/1810p /1810f/2010e cn712 cn713 (dp-2010e only) lpc3 pcb pin no. Signal name destination signal waveform function cn712-1 +24vm dc motor-1 +24 vdc power supply cn712-2 +24vm dc motor-2 +24 vdc power supply cn712-3 mgnd dc motor-3 ground cn712-4 mgnd dc motor-4 ground...

  • Page 167

    167 dp-1510p/1810p /1810f/2010e apr 2002 edition 2.0 cn714 (dp-2010e only) cn715 cn713-2 +24vm keep solenoid +24 vdc power supply cn713-3 ndupsen1 keep solenoid duplex sensor1 signal lpc3 pcb pin no. Signal name destination signal waveform function cn714-1 ndupsen1 duplex sensor1-1 duplex unit paper...

  • Page 168

    168 apr 2002 edition 2.0 dp-1510p/1810p /1810f/2010e cn716 cn722 cn715-4 +24vf4 htc pcb cn765-4 +24 vdc power supply cn715-5 gnd htc pcb cn765-5 ground cn715-6 pzcin htc pcb cn765-6 heater control signal cn715-7 n.C. Not used lpc3 pcb pin no. Signal name destination signal waveform function cn716-1 ...

  • Page 169

    169 dp-1510p/1810p /1810f/2010e apr 2002 edition 2.0 cn723 cn724 cn722-3 nbpsen toner waste sensor cn740-3 toner waste container sensor h: container installed l: container not installed cn722-4 ntfsen toner waste sensor cn740-4 toner waste sensor h: full l: not full cn722-5 bpled toner waste sensor ...

  • Page 170

    170 apr 2002 edition 2.0 dp-1510p/1810p /1810f/2010e cn726 cn731 lpc3 pcb pin no. Signal name destination signal waveform function cn726-1 pbthp toner bottle hp sensor-1 photo sensor dc drive voltage cn726-2 gnd toner bottle hp sensor-2 ground cn726-3 ldbthp toner bottle hp sensor-3 toner bottle hp ...

  • Page 171

    171 dp-1510p/1810p /1810f/2010e apr 2002 edition 2.0 cn731-11 padf2a cst4 pcb cn776-11 2nd feed roller drive signal cn731-12 pmrclh2a cst4 pcb cn776-12 2nd medium roller drive signal cn731-13 plift2 cst4 pcb cn776-13 2nd lift dc motor drive signal cn731-14 npchk2 cst4 pcb cn776-14 2nd paper tray pap...

  • Page 172

    172 apr 2002 edition 2.0 dp-1510p/1810p /1810f/2010e cn731-22 plift3 cst4 pcb cn776-22 3rd lift dc motor drive signal cn731-23 npchk3 cst4 pcb cn776-23 3rd paper tray paper detection signal l: detect cn731-24 ncaset3 cst4 pcb cn776-24 3rd paper tray detection signal cn731-25 puplimit3 cst4 pcb cn776...

  • Page 173

    173 dp-1510p/1810p /1810f/2010e apr 2002 edition 2.0 cn731-33 ncaset4 cst4 pcb cn776-33 4th paper tray detection signal cn731-34 puplimit4 cst4 pcb cn776-34 4th lift dc motor ready signal cn731-35 nfdpchk4 cst4 pcb cn776-35 4th paper tray paper registration detection signal l: detect cn731-36 njamdo...

  • Page 174

    174 apr 2002 edition 2.0 dp-1510p/1810p /1810f/2010e 3.11. Adf pc board cn21 refer to sc pc board cn3. Cn22 adf pcb pin no. Signal name destination signal waveform function cn22-1 outa adf motor-1 motor control signal cn22-2 +24v adf motor-2 +24 vdc power supply cn22-3 nouta adf motor-3 motor contro...

  • Page 175

    175 dp-1510p/1810p /1810f/2010e apr 2002 edition 2.0 cn25 cn27 cn28 adf pcb pin no. Signal name destination signal waveform function cn25-1 +24vopf stamp solenoid +24 vdc power supply cn25-2 nastamp stamp solenoid stamp control signal adf pcb pin no. Signal name destination signal waveform function ...

  • Page 176

    176 apr 2002 edition 2.0 dp-1510p/1810p /1810f/2010e cn29 cn28-6 +5v original length sensor2 +5 vdc power supply cn28-7 nab4s sns pcb cn41-1 original width detection signal l: detect cn28-8 naa3s sns pcb cn41-2 original width detection signal l: detect cn28-9 gnd sns pcb cn41-4 ground cn28-10 +5v sn...

  • Page 177

    177 dp-1510p/1810p /1810f/2010e apr 2002 edition 2.0 cn30 adf pcb pin no. Signal name destination signal waveform function cn30-1 n.C. Not used cn30-2 n.C. Not used cn30-3 n.C. Not used cn30-4 nab2sn duplex eject sensor duplex eject detection signal l: detect cn30-5 gnd duplex eject sensor ground cn...

  • Page 178

    178 apr 2002 edition 2.0 dp-1510p/1810p /1810f/2010e 3.12. Ccd pc board cn51 refer to sc pc board cn106 and cn120. Cn52 ccd pcb pin no. Signal name destination signal waveform function cn52-1 fgnd fg ground 0v.

  • Page 179

    179 dp-1510p/1810p /1810f/2010e apr 2002 edition 2.0 3.13. Lsu pc board cn810 refer to sc pc board cn110. Cn811, cn3 refer to lpc3 pc board cn701..

  • Page 180

    180 apr 2002 edition 2.0 dp-1510p/1810p /1810f/2010e 3.14. Htc pc board cn760 cn761 cn762 cn764 cn765 cn766 refer to lpc3 pc board cn715. Htc pcb pin no. Signal name destination signal waveform function cn760 ac(l) inlet-1 ac power supply htc pcb pin no. Signal name destination signal waveform funct...

  • Page 181

    181 dp-1510p/1810p /1810f/2010e apr 2002 edition 2.0 cn767 htc pcb pin no. Signal name destination signal waveform function cn767-1 ac(n) cn48w03 ac power supply cn767-2 ac(n) cn48w03 ac power supply ac120v 230v ac120v 230v.

  • Page 182

    182 apr 2002 edition 2.0 dp-1510p/1810p /1810f/2010e 3.15. Hvps cn800 refer to lpc3 pc board cn702. Hvps pin no. Signal name destination signal waveform function hvps t1 fer transfer roller transfer signal (high voltage) hvps c charge charge roller charge signal (high voltage) hvps d developm ent de...

  • Page 183

    183 dp-1510p/1810p /1810f/2010e apr 2002 edition 2.0 3.16. Lvps cn60 refer to htc pc board cn762. Cn61 refer to sc pc board cn101. Cn62 refer to lpc3 pc board cn710 and cn716..

  • Page 184

    184 apr 2002 edition 2.0 dp-1510p/1810p /1810f/2010e 3.17. Ils pc board cn750 refer to lpc3 pc board cn703..

  • Page 185

    185 dp-1510p/1810p /1810f/2010e apr 2002 edition 2.0 3.18. Inv pc board cn1 refer to sc pc board cn9. Cn2 inv pcb pin no. Signal name destination signal waveform function cn2-1 hvac1 lfb pcb cn181-1 cn2-2 hvac2 lfb pcb cn181-2 2.5kvpp 2.5kvpp.

  • Page 186

    186 apr 2002 edition 2.0 dp-1510p/1810p /1810f/2010e 3.19. Lfb pc board cn181 refer to inv pc board cn2. Cn182 lfb pcb pin no. Signal name destination signal waveform function cn182-1 hvac1 lfb pcb cn182-1 cn182-2 hvac2 lfb pcb cn182-2 2.5kvpp 2.5kvpp.

  • Page 187

    187 dp-1510p/1810p /1810f/2010e apr 2002 edition 2.0 3.20. Sns pc board cn41 refer to adf pc board cn28..

  • Page 188

    188 apr 2002 edition 2.0 dp-1510p/1810p /1810f/2010e 3.21. Mjr pc board cn20 cn22 refer to sc pc board cn114. Cn25 refer to sc pc board cn111. Mjr pcb pin no. Signal name destination signal waveform function cn20-1 t1 telephone line line signal cn20-2 n.C. Not used cn20-3 l2 telephone line line sign...

  • Page 189

    189 dp-1510p/1810p /1810f/2010e apr 2002 edition 2.0 3.22. Cst4 pc board cn771 cst4 pcb pin no. Signal name destination signal waveform function cn771-1 npchk2 paper detect sensor-1 2nd paper tray paper detection signal l: detect cn771-2 gnd paper detect sensor-2 ground cn771-3 ldsp2 paper detect se...

  • Page 190

    190 apr 2002 edition 2.0 dp-1510p/1810p /1810f/2010e cn772 cn773 cst4 pcb pin no. Signal name destination signal waveform function cn772-1 +24vm feed clutch-1 +24 vdc power supply cn772-2 nadf2 feed clutch-4 2nd paper tray feed roller drive signal cn772-3 +24vm medium roller clutch-1 +24 vdc power s...

  • Page 191

    191 dp-1510p/1810p /1810f/2010e apr 2002 edition 2.0 cn774 cn775 cn776 refer to lpc3 pc board cn731. Cn777 refer to lpc3 pc board cn731. Cst4 pcb pin no. Signal name destination signal waveform function cn774-1 n3mrdy dc motor dc motor ready signal cn774-2 n3mon dc motor dc motor ready signal cn774-...

  • Page 192

    192 apr 2002 edition 2.0 dp-1510p/1810p /1810f/2010e 3.23. Lanb pc board cn2 refer to sc pc board cn123. Cn5 cn6 lanb pcb pin no. Signal name destination signal waveform function cn5-1 link lanc pcb cn200-1 lanb pcb/ lanc pcb link signal cn5-2 +5v lanc pcb cn200-3 +5 vdc power supply cn5-3 rxd lanc ...

  • Page 193

    193 dp-1510p/1810p /1810f/2010e apr 2002 edition 2.0 3.24. Lanc pc board cn200 refer to lanb pc board cn5 and cn6..

  • Page 194

    194 apr 2002 edition 2.0 dp-1510p/1810p /1810f/2010e 3.25. Ep pc board cn1 refer to sc pc board cn121..

  • Page 195

    195 dp-1510p/1810p /1810f/2010e apr 2002 edition 2.0 3.26. Sru pc board (optional) cn91 sru pcb pin no. Signal name destination signal waveform function cn91-1 mic (+) telephone handset cn handset microphone cn91-2 rcv (+) telephone handset cn handset receiver cn91-3 rcv (-) telephone handset cn han...

  • Page 196: 4 Troubleshooting

    196 apr 2002 edition 2.0 dp-1510p/1810p /1810f/2010e 4 troubleshooting 4.1. Initial troubleshooting flowchart start plug the power cord in and turn the power switch on. Does the lcd display the function correctly? Does the original document feed through correctly? Does the recording paper exit the u...

  • Page 197

    197 dp-1510p/1810p /1810f/2010e apr 2002 edition 2.0 4.2. Improper lcd display replace the sc pcb. Is the trouble resolved? Replace the low voltage power supply unit. End check connectors: cn108 (sc pcb) and cn201 (pnl6-1 pcb). Is led/lcd displayed? Does the display appear normal? Replace the lcd mo...

  • Page 198

    198 apr 2002 edition 2.0 dp-1510p/1810p /1810f/2010e 4.3. Printed copy quality problems 4.3.1. Black copy no yes check the scanner mechanism. Is the hvps normal? Start 1. Check all connectors and voltages on the hvps. 2. Check the contacts between hvps and toner bottle. 3. Replace the hvps. Yes no i...

  • Page 199

    199 dp-1510p/1810p /1810f/2010e apr 2002 edition 2.0 4.3.2. Blank copy start end check the scanner mechanism. Are there any foreign particles or stains on the btr? Is the process unit operational? Is the hvps normal? Yes yes yes no no no replace the process unit. Yes no 1. Clean the btr with a soft,...

  • Page 200

    200 apr 2002 edition 2.0 dp-1510p/1810p /1810f/2010e 4.3.3. Vertical white lines start end replace the recording paper. Yes no replace the process unit. Are there any foreign particles or stains blocking the laser beam path? No 1. Clean the btr with a soft, dry cloth. 2. Replace the btr. Yes no clea...

  • Page 201

    201 dp-1510p/1810p /1810f/2010e apr 2002 edition 2.0 4.3.4. Ghost images start end no yes check the scanner mechanism. Is the process unit operational? No yes are the fuser and pressure roller surfaces clean? No yes is the recording paper damp? Are there any foreign particles or stains on the btr? N...

  • Page 202

    202 apr 2002 edition 2.0 dp-1510p/1810p /1810f/2010e 4.3.5. Vertical dark lines start no yes check the scanner mechanism. Is the process unit operational? No yes are there any foreign particles or stains on the btr? Yes no replace the toner bottle. 1. Clean the btr with a soft, dry cloth. 2. Replace...

  • Page 203

    203 dp-1510p/1810p /1810f/2010e apr 2002 edition 2.0 4.3.6. Horizontal dark lines start yes no replace the toner cartridge. 1. Clean the btr with a soft, dry cloth. 2. Replace the btr. No yes check the scanner mechanism. Is the toner cartridge operational? No yes is the lsu normal? No yes replace th...

  • Page 204

    204 apr 2002 edition 2.0 dp-1510p/1810p /1810f/2010e 4.3.7. Dark background is the lsu normal? No yes replace the lsu. Start no yes check the scanner mechanism. Is the process unit operational? No yes is the recording paper damp? Yes no replace the recording paper. Replace the process unit. Is the h...

  • Page 205

    205 dp-1510p/1810p /1810f/2010e apr 2002 edition 2.0 4.3.8. Light print start no yes is the test pattern printout in copier f1 mode or fax (dp-1810f) service mode 3 normal? Check the scanner mechanism. Is the process unit operational? No yes is the recording paper damp? Yes no replace the paper. Pap...

  • Page 206

    206 apr 2002 edition 2.0 dp-1510p/1810p /1810f/2010e 4.3.9. Horizontal white lines end no yes clean or replace the rollers. Start no yes check the scanner mechanism. Is the process unit operational? No yes is the recording paper damp? Yes no replace the recording paper. Replace the process unit. Is ...

  • Page 207

    207 dp-1510p/1810p /1810f/2010e apr 2002 edition 2.0 4.3.10. Improper fusing (printed image does not bond to the paper) note: replace the entire fuser unit when the thermostat, the thermal fuse or the thermistor assembly becomes an open-circuit. End is the fuser unit normal? No yes replace the fuser...

  • Page 208

    208 apr 2002 edition 2.0 dp-1510p/1810p /1810f/2010e 4.3.11. Voids in solid areas start no yes is the recording paper damp? Replace the recording paper. Is the the process unit operational? Yes no p paper travel end no yes clean or replace the rollers. Are the fuser and pressure roller surfaces clea...

  • Page 209

    209 dp-1510p/1810p /1810f/2010e apr 2002 edition 2.0 4.3.12. Black dots end no yes clean or replace the rollers. Start yes no p paper travel are the fuser and pressure roller surfaces clean? Is the process unit operational? Replace the process unit..

  • Page 210

    210 apr 2002 edition 2.0 dp-1510p/1810p /1810f/2010e 4.3.13. Recording paper creases start no yes is the recording paper damp? Replace the recording paper. End are the fuser and pressure roller surfaces soiled or are there any foreign particles or stains in the fuser unit? 2. Clean or replace the ro...

  • Page 211

    211 dp-1510p/1810p /1810f/2010e apr 2002 edition 2.0 4.3.14. Poor printed copy quality 4.3.15. Document skewing start is the test pattern printout in copier f1 mode normal? 1. Replace the lpc3 pcb. 2. Replace the lsu. 3. Replace the hvps. 4. Replace the process unit. End is the printed copy correct?...

  • Page 212

    212 apr 2002 edition 2.0 dp-1510p/1810p /1810f/2010e 4.3.16. Abnormal printing start is the recording paper loaded in the paper tray properly? 1. Adjust the paper width guide. 2. Adjust the paper length guide. Is the panasonic toner bottle being used? Yes no is the recording paper size and thickness...

  • Page 213

    213 dp-1510p/1810p /1810f/2010e apr 2002 edition 2.0 4.3.17. Scanned copy quality problems start no yes is the scanner lamp abnormal? Replace the scanner lamp. End are the transmitting rollers dirty? Are there any foreign particles or paper pieces in the scanning area? Yes no remove the foreign part...

  • Page 214

    214 apr 2002 edition 2.0 dp-1510p/1810p /1810f/2010e 4.3.18. Print skew adjustment for platen glass scanning follow the procedures below to adjust for the skewing when scanning original(s) from the platen glass. (1) make sure that the scanner unit is in the standby mode. (2) 3 screws and remove the ...

  • Page 215

    215 dp-1510p/1810p /1810f/2010e apr 2002 edition 2.0 4.4. Document feeder (adf) 4.4.1. No document feed is the document set properly? Adjust or replace the actuator. Is the document thickness or size within specifications? Does the lcd activate when a document is set? Check the harness of the adf mo...

  • Page 216

    216 apr 2002 edition 2.0 dp-1510p/1810p /1810f/2010e 4.4.2. Document jam remove any obstacles blocking the path. Is the trouble resolved? Is the trouble resolved? Are there any obstacles in the document path? Does the paper feed roller rotate? Check the adf motor connector. Replace the adf motor or ...

  • Page 217

    217 dp-1510p/1810p /1810f/2010e apr 2002 edition 2.0 4.4.3. Document skew remove any obstacles from the document path. Are there any obstacles in the document path? Are the components of the feeder unit operational? Does the np sensor actuator move smoothly? Are the pre feed and paper feed rollers o...

  • Page 218

    218 apr 2002 edition 2.0 dp-1510p/1810p /1810f/2010e 4.4.3.1. Adf feed skew adjustment using a lined original (about 20 lb (75 g/m 2 ) weight pager), make a copy from the adf to check for feeding alignment. (1) copy an original using the adf. (2) open the adf cover and release the stopper. (3) remov...

  • Page 219

    219 dp-1510p/1810p /1810f/2010e apr 2002 edition 2.0 4.5. Troubleshooting the lan interface 4.5.1. Checking network configuration start from the dos prompt, enter the following command-line utility: ipconfig /all locate a pc connected to the same subnet mask as the unit does the displayed network co...

  • Page 220

    220 apr 2002 edition 2.0 dp-1510p/1810p /1810f/2010e 4.5.2. Testing the tcp/ip network it is beyond the scope of this service manual to cover networking in detail, there are many excellent manuals on this subject, but we hope the information in this section will aid with your troubleshooting efforts...

  • Page 221

    221 dp-1510p/1810p /1810f/2010e apr 2002 edition 2.0 2. Checking current configuration print the current unit internet parameters configuration. Locate a pc connected to the same subnet mask as the unit, then from the dos prompt, type the following command-line utility: "ipconfig /all" for windows 9...

  • Page 222

    222 apr 2002 edition 2.0 dp-1510p/1810p /1810f/2010e pinging the unit pinging the default gateway (default router ip address) pinging the smtp/pop server if for some reason, the physical connection is missing, the echo reply will not be received from the destination and the following output is displ...

  • Page 223

    223 dp-1510p/1810p /1810f/2010e apr 2002 edition 2.0 if the physical destination is far and it’s connected by wan (wide area network), the ping option command default value must be changed to compensate for the expected delayed response. E.G. 4. Tracing a packet route another useful command-line uti...

  • Page 224

    224 apr 2002 edition 2.0 dp-1510p/1810p /1810f/2010e 5. Managing network route tables in the simplest case a router connects two network segments. In this model, the system used to join the two segments needs to know only about these segments. The routing table for router r1 in this case is simple; ...

  • Page 225

    225 dp-1510p/1810p /1810f/2010e apr 2002 edition 2.0 when the packet does not reach the specified destination even when the physical connection is properly made, check the registered persistent routes on the same subnet as the unit by typing "route print" in the dos command-line. The output display ...

  • Page 226

    226 apr 2002 edition 2.0 dp-1510p/1810p /1810f/2010e 7. Testing unit using the telnet command telnet is a terminal emulation protocol. Telnet enables pcs and workstations to function as dumb terminals in sessions with hosts on internet works. From windows 98/xp/me/2000/nt, use the telnet to test the...

  • Page 227

    227 dp-1510p/1810p /1810f/2010e apr 2002 edition 2.0 4.6. Error codes (for copier) the self-diagnostic functions detect troubles in the important components of the copier. When any trouble occurs, the copier stops. Note: some codes may not be used for dp-1510p/1810p, which are reserved for future us...

  • Page 228

    228 apr 2002 edition 2.0 dp-1510p/1810p /1810f/2010e u20 close adf cover 1. Adf cover is open. 2. Adf is not installed correctly. 3. Adf cover sensor is disconnected. 4. Adf cover sensor is defective. 5. Lvps connector is disconnected. 6. Lvps is defective. U21 close platen cover while the copier is...

  • Page 229

    229 dp-1510p/1810p /1810f/2010e apr 2002 edition 2.0 4.6.2. Jam error codes (j code) section jam location a adf b paper transport / exit area c paper entry area jam error codes (j codes) table code contents section j00 the registration sensor did not detect paper within a predetermined time after pa...

  • Page 230

    230 apr 2002 edition 2.0 dp-1510p/1810p /1810f/2010e j40 the eject paper sensor does not detect paper within a predetermined time after registration sensor is on. C j41 the eject paper sensor does not detect no paper within a predetermined time after eject paper sensor is on. C j42 the paper exit se...

  • Page 231

    231 dp-1510p/1810p /1810f/2010e apr 2002 edition 2.0 4.6.3. Mechanical error codes (e code) e1: optical unit error code function check points e1- 20 laser unit horizontal synchronization 1. Lpc3 pcb connector(s) is disconnected. 2. Lpc3 pcb is defective. 3. Lsu is defective. 4. Lvps connector is dis...

  • Page 232

    232 apr 2002 edition 2.0 dp-1510p/1810p /1810f/2010e note: these error codes will appear only when the optional accessories are installed. Refer to optional unit service manuals. E4: fuser unit error code function check points e4- 01 fuser warm-up temperature 1. Fuser thermistor is dirty. 2. Thermis...

  • Page 233

    233 dp-1510p/1810p /1810f/2010e apr 2002 edition 2.0 4.7. Information codes table (for facsimile) fax information codes code mode phase description of problem cause 012 rcv c, d the length of the received document is over 2 m. 030 xmt b read point sensor does not go to on within 10 seconds after the...

  • Page 234

    234 apr 2002 edition 2.0 dp-1510p/1810p /1810f/2010e 402 xmt b dcn was returned from receiver while transmitter is waiting for nsf/dis. Receiver working in non-ccitt mode only. (possible incompatibility) 403 rcv (polling) b transmitter had no polling function. "polled=on" (polling xmt ready) is not ...

  • Page 235

    235 dp-1510p/1810p /1810f/2010e apr 2002 edition 2.0 415 xmt (polling) b remote side attempted to receive message from your machine in polling communication. Inform the remote side that your machine does not have the polling transmission feature. 416 rcv d receiver did not detect post command, such ...

  • Page 236

    236 apr 2002 edition 2.0 dp-1510p/1810p /1810f/2010e 495 xmt rcv c during reception, cd turned off or continued on for long time. During communication, lost loop - current. Line is disconnected. Transmitter is defective. Sc pcb or mjr pcb is defective. 496 xmt c cs of modem is not able to turn on. S...

  • Page 237

    237 dp-1510p/1810p /1810f/2010e apr 2002 edition 2.0 630 xmt or rcv (polling) b redial count over. No dial tone detected. Sensor dial tone is not detected. (country dependent) busy tone is detected. (country dependent) t1 timer (35±5 sec) elapsed without a signal from the receiver. 631 xmt a "stop" ...

  • Page 238

    238 apr 2002 edition 2.0 dp-1510p/1810p /1810f/2010e 725 xmt pop lan dns server connection timed out. Incorrect dns server address is set. Dns server is down. 726 xmt pop lan received an error response from the dns server. Incorrect pop server address is set. Incorrect smtp server address is set. 73...

  • Page 239

    239 dp-1510p/1810p /1810f/2010e apr 2002 edition 2.0 4.8. Diagnostic codes (for facsimile) the 13-digit diagnostic code is provided for the service engineer to analyze how the communication was performed. The code is recorded on the journal. Journal example 1st digit: manufacturer code -: not used/d...

  • Page 240

    240 apr 2002 edition 2.0 dp-1510p/1810p /1810f/2010e 2nd digit -: not used/defined 3rd digit -: not used/defined fax diagnostic codes data definition id (tsi, csi, cig) rtn dcn stop button 0 - - - - 1 received - - - 2 - received - - 3 received received - - 4 - - received - 5 received - received - 6 ...

  • Page 241

    241 dp-1510p/1810p /1810f/2010e apr 2002 edition 2.0 4th digit -: not used/defined 5th digit -: not used/defined fax diagnostic codes data definition scanning rate resolution 0 20 ms/line std 1 5 ms/line std 2 10 ms/line std 3 - std 4 40 ms/line std 5 - std 6 - std 7 0 ms/line std 8 20 ms/line fine ...

  • Page 242

    242 apr 2002 edition 2.0 dp-1510p/1810p /1810f/2010e 6th digit -: not used/defined 7th digit -: not used/defined fax diagnostic codes data definition polling xmt/rcv selective comm. Password comm. 0 - rcv off off 1 yes rcv off off 2 - xmt off off 3 yes xmt off off 4 - rcv on off 5 yes rcv on off 6 -...

  • Page 243

    243 dp-1510p/1810p /1810f/2010e apr 2002 edition 2.0 8th digit -: not used/defined 9th digit -: not used/defined fax diagnostic codes data definition advanced comm. Cover sheet xmt 0 - - 1 report xmt - 2 check & call - 3 - - 4 memory transfer - 5 - - 6 - - 7 - - 8 - yes 9 report xmt yes a check & ca...

  • Page 244

    244 apr 2002 edition 2.0 dp-1510p/1810p /1810f/2010e 10th digit -: not used/defined 11th digit -: not used/defined fax diagnostic codes data definition coding ecm 0 mh - 1 mr - 2 mmr - 3 jbig - 4 - - 5 - - 6 - - 7 - - 8 mh yes 9 mr yes a mmr yes b jbig yes c - yes d - yes e - yes f - yes fax diagnos...

  • Page 245

    245 dp-1510p/1810p /1810f/2010e apr 2002 edition 2.0 12th digit -: not used/defined 13th digit -: not used/defined fax diagnostic codes data definition modem speed modem speed (v.34) 0 2400 bps - 1 4800 bps 2400 bps 2 7200 bps 4800 bps 3 9600 bps 7200 bps 4 tc 7200 bps 9600 bps 5 tc 9600 bps 12000 b...

  • Page 246

    246 apr 2002 edition 2.0 dp-1510p/1810p /1810f/2010e 4.9. Troubleshooting (for pcl 6 emulation kit) 4.9.1. Checking the basics 4.9.2. Document does not print properly this section explains how to solve problems including error messages or unexpected printing results. If the panasonic printing system...

  • Page 247

    247 dp-1510p/1810p /1810f/2010e apr 2002 edition 2.0 4.9.3. Error message appears on the pc 4.9.4. Error message appears on the unit 4.9.5. System error (cd drive related error during installation) error message solutions network print dll error. • check if the panasonic device is turned "on" and th...

  • Page 248: 5 Service Modes

    248 apr 2002 edition 2.0 dp-1510p/1810p /1810f/2010e 5 service modes 5.1. Service modes (for copier) these service modes are provided to assist the technician in checking for abnormalities in the copier and a means of making adjustments to the input/output of major components. 5.1.1. Service mode pr...

  • Page 249

    249 dp-1510p/1810p /1810f/2010e apr 2002 edition 2.0 f7 electronic counter 00 not used 01 key operator id key operator’s identification code for access to the counter mode. Maintenance count 02 total count total count for all copies / prints. 03 pm count preventive maintenance count. 04 scanner pm c...

  • Page 250

    250 apr 2002 edition 2.0 dp-1510p/1810p /1810f/2010e f8 service adjustment perform pseudo-operation of an item (selected by code numbers). 00 chk mirror movement when replacing the exposure lamp. Procedure: a) press the start key to move the exposure lamp to the position (approx. 9.8 in / 250mm from...

  • Page 251

    251 dp-1510p/1810p /1810f/2010e apr 2002 edition 2.0 f9 unit maintenance 00 fax function parameters 01 service alert tel # displays the contact number when a machine malfunction occurs. 02 firmware version 00 host displays the firmware version for host. 02 scanner displays the firmware version for s...

  • Page 252

    252 apr 2002 edition 2.0 dp-1510p/1810p /1810f/2010e note: to print the list, follow the steps below. F9 - start - 3 - start or set - 0. F5 / f6 information list (sample) - f 5 / f 6 i n f o r m a t i o n l i s t - f5-00 country version usa/can f5-50 auto exposure (t/p) fix f5-01 . . . . . F5-51 . ....

  • Page 253

    253 dp-1510p/1810p /1810f/2010e apr 2002 edition 2.0 note: to print the list, follow the steps below. F9 - start - 3 - start or set - 1. - m a c h i n e s e t u p i n f o r m a t i o n - 1.Firmware version machine name : dp-1810p host : aav109xxpu scanner : 00000 printer : 610044 printer board (pdl)...

  • Page 254

    254 apr 2002 edition 2.0 dp-1510p/1810p /1810f/2010e note: to print the list, follow the steps below. F9 - start - 3 - start or set - 2. F7 total counter list (sample) - f 7 t o t a l c o u n t e r l i s t - f7-01 key operator id : 0 f7-02 total count : 155 f7-03 pm count : 155 f7-04 scanner pm coun...

  • Page 255

    255 dp-1510p/1810p /1810f/2010e apr 2002 edition 2.0 5.1.3. F4 mode: input/output check set the machine to service mode and press "4" on the keypad. ↓ press the “start” key. ↓ select the check input or check output on the control panel. ↓ enter the number to activate the test then press “start” key....

  • Page 256

    256 apr 2002 edition 2.0 dp-1510p/1810p /1810f/2010e 008 jam access cover open detection sensor (3rd tray) door is open. 1 for dp-1810f/2010e paper level sensor (3rd tray) upper limit is detected. 1 paper tray sensor (3rd tray) paper tray is detected. 1 np sensor (3rd tray) paper is detected. 1 009 ...

  • Page 257

    257 dp-1510p/1810p /1810f/2010e apr 2002 edition 2.0 2. Output check press the “start” key to start and press the “stop” key to reset. 031 adf original sensor sensor is activated. 1 adf original width sensor (a4/letter) a4/letter size is detected. 1 adf original width sensor (b4) b4 size is detected...

  • Page 258

    258 apr 2002 edition 2.0 dp-1510p/1810p /1810f/2010e 063 1st tray feed roller clutch activate 1st tray paper drive clutch after pressing start key. 064 1st tray lift dc motor activate 1st tray lift dc motor after pressing start key. 065 not used 066 lsu fan activate lsu fan motor after pressing star...

  • Page 259

    259 dp-1510p/1810p /1810f/2010e apr 2002 edition 2.0 5.1.4. F5 mode: copier function parameters set the machine to service mode and press "5" on the keypad. ↓ press the “start” key. ↓ select the desired code number on the control panel. ↓ if you wish to select another code number, scroll the menu wi...

  • Page 260

    260 apr 2002 edition 2.0 dp-1510p/1810p /1810f/2010e 14 paper size (tray 1) 0 : ledger 1 : legal 2 : letter 3 : letter-r 4 : invoice/a5-r 5 : a3 6 : b4 7 : a4 8 : a4-r 9 : b5 10 : b5-r 11 : a5-r 12 : fls1 13 : fls2 0 (for north america) 5 (for europe/ other) 15 paper size (tray 2) same as f5-14 same...

  • Page 261

    261 dp-1510p/1810p /1810f/2010e apr 2002 edition 2.0 55 margin value default 0 : 5mm 1 : 10mm 2 : 15mm 3 : 20mm 1 56 edge value default 0 : 5mm 1 : 10mm 2 : 15mm 3 : 20mm 0 57 book value default 0 : 5mm 1 : 10mm 2 : 15mm 3 : 20mm 1 58 not used 59 copier operation u13 (after "u13" toner box empty det...

  • Page 262

    262 apr 2002 edition 2.0 dp-1510p/1810p /1810f/2010e 76 automatic exposure (text) 0 : no 1 : yes 2 : fix 2 77 text error diffusion 0 : off 1 : on (execute error diffusion on text mode.) 1 78 a4/ltr size select 0 : no 1 : yes (set paper side to a4/ltr if original is less than a4/ltr.) 0 79 not used 8...

  • Page 263

    263 dp-1510p/1810p /1810f/2010e apr 2002 edition 2.0 note: if you change the function parameter “f5 - 00”, country version, you must also change the related function parameters “f5 - 80, 95, 96”. Related function parameters 88-89 not used 90 beep sound 0 : off 1 : soft 2 : loud 1 91 m1, size y set t...

  • Page 264

    264 apr 2002 edition 2.0 dp-1510p/1810p /1810f/2010e 5.1.5. F6 mode: adjustment and programming set the machine to service mode and press "6" on the keypad. ↓ press the "start" key. ↓ select the desired code number on the control panel. ↓ if you wish to select another code number, scroll the menu wi...

  • Page 265

    265 dp-1510p/1810p /1810f/2010e apr 2002 edition 2.0 08 trail edge detection timing of the original image adjustment of trail edge void. (-) : decrease. -9 - 0 0.5mm 09 trail edge detection timing of the copy image adjustment of trail edge void. (+) : increase. (-) : decrease. -9 - +15 0.425mm 10-17...

  • Page 266

    266 apr 2002 edition 2.0 dp-1510p/1810p /1810f/2010e 51 photo mode image density image density adjustment for photo mode. (-) : darker. (+) : lighter. -99 - +99 52 not used 53 ccd read timing adjustment of ccd read position. (+) : more delay. (-) : less delay. -44 - +44 0.2mm 54-68 not used 69 stamp...

  • Page 267

    267 dp-1510p/1810p /1810f/2010e apr 2002 edition 2.0 5.1.6. F7 mode: electronic counter set the machine to service mode and press "7" on the keypad. ↓ press the “start” key. ↓ select the desired code number on the control panel. ↓ if you wish to select another code number, scroll the menu with the a...

  • Page 268

    268 apr 2002 edition 2.0 dp-1510p/1810p /1810f/2010e f7 electronic counter copy count 20 copy print count total count of copies printed. 21 copy scan count total count of copies scanned. Pc count 22 pc print count total count printed from pc. 23 pc scan count total count scanned to pc. Fax count 24 ...

  • Page 269

    269 dp-1510p/1810p /1810f/2010e apr 2002 edition 2.0 5.1.7. F8 mode: copier operation adjustment set the machine to service mode and press "8" on the keypad. ↓ press the “start” key. ↓ select the desired code number on the control panel. ↓ if you wish to select another code number, scroll the menu w...

  • Page 270

    270 apr 2002 edition 2.0 dp-1510p/1810p /1810f/2010e 5.1.8. F9 mode: system maintenance set the machine to service mode and press "9" on the keypad. ↓ press the “start” key. ↓ select the desired code number on the control panel. ↓ if you wish to select another code number, scroll the menu with the a...

  • Page 271

    271 dp-1510p/1810p /1810f/2010e apr 2002 edition 2.0 f9 unit maintenance 07 firmware update 00 host program (4mb) updates the firmware in the machine with the master firmware card. 01 host part a (2mb) 02 host part b (2mb) 03 pdl board (2mb) 04 lan board (2mb) 05 pc → host program (4mb) updates the ...

  • Page 272

    272 apr 2002 edition 2.0 dp-1510p/1810p /1810f/2010e 5.2. Service modes (for facsimile) note: this function is available for dp-1810f only. 5.2.1. Service mode table the following service modes are provided to assist you in setting operational functions of the unit and determining the condition of t...

  • Page 273

    273 dp-1510p/1810p /1810f/2010e apr 2002 edition 2.0 5.2.2. Service mode 1 (function parameter setting) use the following procedure to change the function parameters. Note: the following buttons provide these functions in the service mode: service mode 1 : for dp-1810f step operation or unit conditi...

  • Page 274

    274 apr 2002 edition 2.0 dp-1510p/1810p /1810f/2010e function parameter table no. Parameter selections function 000 mon/tel dial 1 = monitor 2 = tel/dial selects whether the machine starts to tx automatically during on-hook dialing. Monitor : start to tx after pressing start tel/dial : start to tx a...

  • Page 275

    275 dp-1510p/1810p /1810f/2010e apr 2002 edition 2.0 014 g3 tx eql 1 = 0db 2 = 4db 3 = 8db 4 = 12db selects the cable equalizer for g3 transmission mode, 0db, 4db, 8db or 12db. 015 ~ 016 not used 017 tx start 1 = 2400 bps 2 = 4800 bps 3 = 7200 bps 4 = 9600 bps 5 = tc7200 bps 6 = tc9600 bps 7 = 12000...

  • Page 276

    276 apr 2002 edition 2.0 dp-1510p/1810p /1810f/2010e 029 remote diagnostics 1 = off (will not accept) 2 = on (accepts) selects whether the machine accepts remote diagnostics from the service station. 030 ced & 300 bps 1 = 75 ms 2 = 1 sec selects the pause interval between the ced and the 300 bps sig...

  • Page 277

    277 dp-1510p/1810p /1810f/2010e apr 2002 edition 2.0 048 049 not used 050 ring detect mode 1 = normal 2 = rough selects the quality of ringer detection. Use if the line signal is out of regulation, set to "rough" so that the unit may detect the ringing signals. 051 not used 052 pulse rate 1 = 10 pps...

  • Page 278

    278 apr 2002 edition 2.0 dp-1510p/1810p /1810f/2010e 070 line error 1 = 128 lines 2 = 256 lines 3 = 512 lines 4 = 1024 lines 5 = 2048 lines 6 = off (will not disconnect line) 1. Selects the line disconnect condition during reception. If the number of line errors exceed this setting, the unit will di...

  • Page 279

    279 dp-1510p/1810p /1810f/2010e apr 2002 edition 2.0 087 darker level 0 = lightest contrast ~ 15 = darkest contrast selects the contrast level. 0 ← → 15 lightest ← → darkest 088 normal level 089 lighter level 090 091 not used 092 smoothing 1 = off 2 = on selects whether the smoothing function is ava...

  • Page 280

    280 apr 2002 edition 2.0 dp-1510p/1810p /1810f/2010e note 1: continuous polling (station mode) this feature allows you to store or add documents into a polled file in memory. To enable the continuous polling feature set function parameter no. 003 to “2:station”. The last program key will be assigned...

  • Page 281

    281 dp-1510p/1810p /1810f/2010e apr 2002 edition 2.0 5.2.3. Service mode 3 (printout of lists, reports and test results) from this service mode you can print the function parameter list, page memory test, printer report, all document file, protocol trace and the toner order form. 5.2.3.1. Function p...

  • Page 282

    282 apr 2002 edition 2.0 dp-1510p/1810p /1810f/2010e function parameter list (sample) ************* -function parameter- ************* date mmm-dd-yyyy ***** time 12:07 ***p.01 note:the power must be reset for the new parameter settings to take effect. -panasonic dp-1810f- **************************...

  • Page 283

    283 dp-1510p/1810p /1810f/2010e apr 2002 edition 2.0 note: 1. [ ] - factory default 2. The contents of the function parameter list may vary depending on the country’s regulations. 3. “ * ” mark will be shown on the left side of number when setting was changed from default. Function parameter list (s...

  • Page 284

    284 apr 2002 edition 2.0 dp-1510p/1810p /1810f/2010e 5.2.3.2. Page memory test a test pattern prints out for checking the page memory (ic120 and ic121 on the sc pcb) and printer mechanism using the following procedure. Service mode 3 for dp-1810f - page memory test step operation or unit condition l...

  • Page 285

    285 dp-1510p/1810p /1810f/2010e apr 2002 edition 2.0 mmm-dd-yyyy 15:00 version: dp-1810f aav11502au lbp rom version :400046 memory size: (2mb) tx/rx/prt/cpy:000123/000456/000789/000333 shipment set.

  • Page 286

    286 apr 2002 edition 2.0 dp-1510p/1810p /1810f/2010e 5.2.3.3. Printer report all printer errors are logged on the printer report which can be printed by the following procedure. Service mode 3 for dp-1810f - printer report step operation or unit condition lcd display 1 standby 2 press “function” and...

  • Page 287

    287 dp-1510p/1810p /1810f/2010e apr 2002 edition 2.0 **************-printer report-********************* date mmm-dd-yyyy ***** time 19:02******** last print error : mmm-dd-yyyy 15:38 j00 00-00000016 customer id : 1234567890123456 printer : 610050 transmit counter : 000475 receive counter : 000398 c...

  • Page 288

    288 apr 2002 edition 2.0 dp-1510p/1810p /1810f/2010e 1. Printer error detail explanation recording paper jam detection (from 1st tray to inner tray 1) 0.36s 0.02s 0.59s 1.6s b c d e feed solenoid (nadf1) timing sensor (nrsena) j01 timing sensor did not turn on j30 timing sensor did no turn off j40 p...

  • Page 289

    289 dp-1510p/1810p /1810f/2010e apr 2002 edition 2.0 fuser error detection.

  • Page 290

    290 apr 2002 edition 2.0 dp-1510p/1810p /1810f/2010e lsu error detection motor on polygon motor does not reach constant speed during wake up state. Polygon motor on polygon motor ready npmon npmrdy:on normal condition off off off off normal condition 5 sec 0.24 ms (600 x 600dpi) 0.37 ms (16 x15.4 li...

  • Page 291

    291 dp-1510p/1810p /1810f/2010e apr 2002 edition 2.0 out of toner detection toner sensor output may change when the mixing blade passes above the toner sensor. Therefore the output signal has a max. Voltage and min. Voltage during mixing blade rotation cycle (2.1 sec.). E043 (u13) if the unit detect...

  • Page 292

    292 apr 2002 edition 2.0 dp-1510p/1810p /1810f/2010e 5.2.3.4. All document files print the document files from the flash memory. Service mode 3 for dp-1810f - all document files step operation or unit condition lcd display 1 standby 2 press “function” and then “7”. 3 press “monitor” four times, then...

  • Page 293

    293 dp-1510p/1810p /1810f/2010e apr 2002 edition 2.0 5.2.3.5. Protocol trace print a protocol trace report for the previous communication. Service mode 3 for dp-1810f - protocol trace step operation or unit condition lcd display 1 standby 2 press “function” and then “7”. 3 press “monitor” four times...

  • Page 294

    294 apr 2002 edition 2.0 dp-1510p/1810p /1810f/2010e *************** protocol log. Report ****************** date mmm-dd-yyyy ***** time 16:56 ******* status : ok mode : ecm-tx (standard) speed : 9600bps 0ms/l remote capa. : dis 00 ce b9 c4 80 12 local capa. : tsi 2b 20 20 20 38 37 2b 2b 2b 2b 39 38...

  • Page 295

    295 dp-1510p/1810p /1810f/2010e apr 2002 edition 2.0 5.2.3.6. Toner cartridge order form the toner cartridge order form can be printed out manually by the following procedure. Service mode 3 for dp-1810f - toner cartridge order form step operation or unit condition lcd display 1 standby 2 press “fun...

  • Page 296

    296 apr 2002 edition 2.0 dp-1510p/1810p /1810f/2010e explanation of contents (1) low toner message (fixed) “the toner supply in your machine is running low” (2) dealer name up to 25 digits (3) toner order tel # up to 36 digits (4) toner order fax # up to 36 digits (5) customer id up to 16 characters...

  • Page 297

    297 dp-1510p/1810p /1810f/2010e apr 2002 edition 2.0 5.2.4. Service mode 4 (modem test) 5.2.4.1. Binary signal this service mode is used to check the binary signal output. Signals can be output to the line using the following procedure. Binary signal table service mode 4 for dp-1810f - binary signal...

  • Page 298

    298 apr 2002 edition 2.0 dp-1510p/1810p /1810f/2010e 5.2.4.2. Tonal signal this service mode is used to check the tonal signal output. Signals can be output to the line using the following procedure. Tonal signal table service mode 4 for dp-1810f - tonal signal step operation or unit condition lcd d...

  • Page 299

    299 dp-1510p/1810p /1810f/2010e apr 2002 edition 2.0 5.2.4.3. Dtmf signal this service mode is used to check the dtmf (dual tone multi frequency) signal output. The dtmf signal can be generated using the following procedure. Sevice mode 4 for dp-1810f - dtmf signal step operation or unit condition l...

  • Page 300

    300 apr 2002 edition 2.0 dp-1510p/1810p /1810f/2010e dtmf single tone table dtmf dual tone table number dtmf signal tones 1 697 hz 2 770 hz 3 852 hz 4 941 hz 5 1209 hz 6 1336 hz 7 1477 hz 8 1633 hz number dtmf dual tones 0 941 hz + 1336 hz 1 697 hz + 1209 hz 2 697 hz + 1336 hz 3 697 hz + 1477 hz 4 7...

  • Page 301

    301 dp-1510p/1810p /1810f/2010e apr 2002 edition 2.0 5.2.4.4. Binary signal (v.34) this service mode is used to check the binary signal output. Signals can be output to the line using the following procedure. (v.34) binary signal table service mode 4 for dp-1810f - binary signal step operation or un...

  • Page 302

    302 apr 2002 edition 2.0 dp-1510p/1810p /1810f/2010e 5.2.5. Service mode 6 (ram initialization) initializes ram and restores the function parameters to their default values. Note: this operation should be performed when the unit is first installed. Ram initialization table service mode 6 for dp-1810...

  • Page 303

    303 dp-1510p/1810p /1810f/2010e apr 2002 edition 2.0 5.2.6. Service mode 8 (check & call) 5.2.6.1. Overview this feature enables the authorized servicing dealers to manage and improve the machine maintenance to their customers by alerting them of equipment problems. It also can be used as a supply s...

  • Page 304

    304 apr 2002 edition 2.0 dp-1510p/1810p /1810f/2010e e4-10 30 o o exhaust fan motor (1) does not rotate. E5-11 40 o o fuser thermistor and toner sensor error. E5-12 - o o main cpu/lpc interface error. E5-22 51 o o finisher/lpc unit interface error. E7-10 - o o sub cpu system error. E7-11 - o o scann...

  • Page 305

    305 dp-1510p/1810p /1810f/2010e apr 2002 edition 2.0 note: 1. Transmission report: o = service alert report, x = maintenance alert report 2. Condition: r = receive mode, c = copy mode, s = standby mode, t = transmit mode u13 60 no toner cartridge is installed. U13 x low toner u7 66 1st feed cover op...

  • Page 306

    306 apr 2002 edition 2.0 dp-1510p/1810p /1810f/2010e 5.2.6.3. Setting operation 8:check & call press set to select check & call (1-9) 1:svc. Alert fax # check & call (1-9) 2:maint. Alert fax # maint. Alert fax # maint. Alert mail # check & call (1-9) 3:toner order fax # toner order fax # check & cal...

  • Page 307

    307 dp-1510p/1810p /1810f/2010e apr 2002 edition 2.0 note 1. Service alert report to enable the automatic transmission of service alert report, enter the destination fax telephone number or the email address in the “service alert (fax # or mail #)" field. When a printer error occurs, the service ale...

  • Page 308

    308 apr 2002 edition 2.0 dp-1510p/1810p /1810f/2010e 5.2.6.4. Service alert report format explanation of contents (1) customer id (2) firmware version (3) counter information (4) print error last 30 records (latest on top) *************************************************** date mmm-dd-yyyy ***** ti...

  • Page 309

    309 dp-1510p/1810p /1810f/2010e apr 2002 edition 2.0 5.2.6.5. Maintenance alert report format explanation of contents (1) low toner message (fixed) “machine is running out of toner” (2) customer id up to 16 characters (user identification code) (3) firmware version (4) transmission / reception / cop...

  • Page 310

    310 apr 2002 edition 2.0 dp-1510p/1810p /1810f/2010e explanation of contents (1) low toner message (fixed) “the toner supply in your machine is running low” (2) dealer name up to 25 digits (3) toner order tel # up to 36 digits (4) toner order fax # up to 36 digits (5) customer id up to 16 characters...

  • Page 311

    311 dp-1510p/1810p /1810f/2010e apr 2002 edition 2.0 5.2.7. Service mode 9 (system maintenance) 5.2.7.1. Overview this service mode is used to maintain and/or update the firmware of the machine. Use the following procedure for system maintenance. System maintenance table service mode 9 for dp-1810f ...

  • Page 312

    312 apr 2002 edition 2.0 dp-1510p/1810p /1810f/2010e 5.2.7.2. Operation 9:system maintenance press set to select system maint.(1-8) 1:firmware update clear 1 firmware update * in progress * system maint.(1-8) 2:firmware backup dp-xxxaav12300pu press set to start set or start clear clear 2 firmware b...

  • Page 313

    313 dp-1510p/1810p /1810f/2010e apr 2002 edition 2.0 5.2.7.3. Send received file this function is the relief mode which makes it possible to retrieve memory received documents during a fatal printer error by transferring the documents to another fax machine. Mmm-dd-yyyy 15:00 00% service mode enter ...

  • Page 314: 6 System Description

    314 apr 2002 edition 2.0 dp-1510p/1810p /1810f/2010e 6 system description 6.1. Mechanical operation 6.1.1. Scanning mechanism (flatbed) 1. Scanning mechanism the scanning mechanism consisting of lens, ccd pc board assembly, mirrors (551,552), scanner lamp (501), lamp base bracket (516) and mirror 2 ...

  • Page 315

    315 dp-1510p/1810p /1810f/2010e apr 2002 edition 2.0 3. Drive mechanism during scanning, the lamp base bracket (516) and mirror 2 bracket (525) move in the direction of the black arrow and while returning to standby position, it moves in the direction of the white arrow as shown in the illustration ...

  • Page 316

    316 apr 2002 edition 2.0 dp-1510p/1810p /1810f/2010e 6.2. Automatic document feeder the adf (automatic document feeder) automatically feeds paper into the unit, one original at a time. Its main features are: 1. Place originals face-up 2. Correct order stacking (collation mode) 3. Paper feed mechanis...

  • Page 317

    317 dp-1510p/1810p /1810f/2010e apr 2002 edition 2.0 automatic document feeder or iginal stopper (417) pre f eed roller (420) np actuator (407) p aper f eed roller (679) exit roller (316) f eed roller (409) separ ation rub ber (428) sns pc board (134) or iginal t ra y (327, 333) photo sensor (604) f...

  • Page 318

    318 apr 2002 edition 2.0 dp-1510p/1810p /1810f/2010e 6.3. Inverting automatic document feeder the i-adf automatically inverts two-sided original(s) for faxing or copying of the second side. This feature enables machines with a duplexer mounted to perform duplex copying. An i-adf (inverting automatic...

  • Page 319

    319 dp-1510p/1810p /1810f/2010e apr 2002 edition 2.0 inverting automatic document feeder separation roller (2025) adf roller (2016) pre-feed roller (420) original detection sensor (604) release lever plate (2020) 38 document stopper (2022) exit roller (2032) inverting feed roller (2135) pinch roller...

  • Page 320

    320 apr 2002 edition 2.0 dp-1510p/1810p /1810f/2010e 6.4. Receive mechanism 6.4.1. Paper feed modules 1. Paper feed module a. The np actuators (1215) attached to the paper feed block determine if there is recording paper in the recording paper tray. B. The recording paper in the recording paper tray...

  • Page 321

    321 dp-1510p/1810p /1810f/2010e apr 2002 edition 2.0 a. When the printing operation begins, the drive motor (1105) starts driving the gears. B. The clutch (1224) is energized for a specified period of time and turns on. This activates the feed roller (1213). The recording paper is separated into ind...

  • Page 322

    322 apr 2002 edition 2.0 dp-1510p/1810p /1810f/2010e a. When the printing operation begins, the drive motor (1105) starts driving the gears. B. The clutch (1224) is energized for a specified period of time and turns on. This activates the feed roller (1213). The recording paper is separated into ind...

  • Page 323

    323 dp-1510p/1810p /1810f/2010e apr 2002 edition 2.0 a. When inserting the paper tray into the machine, the photo sensor (604) for np activates. At the same time, the lift plate (1316) is combined with the coupling which drives the lift plate of the machine. The lift plate rotates, lifting the botto...

  • Page 324

    324 apr 2002 edition 2.0 dp-1510p/1810p /1810f/2010e a. The recording paper size in the paper feed module is set on the control panel. Lift motor assembly (1238) photo sensor (604) for paper tray detection.

  • Page 325

    325 dp-1510p/1810p /1810f/2010e apr 2002 edition 2.0 2. Sheet bypass a. The np actuator attached to the paper feed unit determines if there is recording paper in the paper tray. B. The recording paper in the paper tray lowers the np actuator and the photo sensor (604) for np actuates. A. When the pr...

  • Page 326

    326 apr 2002 edition 2.0 dp-1510p/1810p /1810f/2010e 6.4.2. Printing process operation the printing process operation consists of process unit and toner bottle with toner supplied. Toner is supplied to the process unit using gravity. The process unit includes the toner paddle and mag roller (1048) t...

  • Page 327

    327 dp-1510p/1810p /1810f/2010e apr 2002 edition 2.0 exposure a portion of the laser beam is deflected to the timing sensor [beam detection (bd) sensor], which controls the start timing of scanning on the opc drum. The cpu also uses the timing sensor to detect abnormal signals. The light beam from t...

  • Page 328

    328 apr 2002 edition 2.0 dp-1510p/1810p /1810f/2010e 6.4.3. Laser unit 1. Laser this laser uses the semiconductor laser. The beam power on the drum surface is approximately 0.20 mw. 2. Collimator lens this lens converges and focuses the laser beam, converting it to parallel light. 3. Aperture this c...

  • Page 329

    329 dp-1510p/1810p /1810f/2010e apr 2002 edition 2.0 6.4.4. Fuser operation the recording paper passes through the fuser roller (913) and is subjected to heat and pressure in the fuser unit. Pressure between the fuser roller (913) and pressure roller (914) fuses or bonds the toner into the paper. Fu...

  • Page 330

    330 apr 2002 edition 2.0 dp-1510p/1810p /1810f/2010e separators (923) five separators (923) are installed in the fuser roller (913). This prevents the recording paper from wrapping around the fuser roller (913), causing a paper jam. When the fuser unit does not reach the specified temperature within...

  • Page 331

    331 dp-1510p/1810p /1810f/2010e apr 2002 edition 2.0 6.5. Electrical circuit explanation 6.5.1. Block diagram dp-1510p/1810p/1810f/2010e block diagram lvds 600dpi 16dot/mm adf pcb ccd pcb ccd upd3747 mn86076 super pixion dance dzac000234 bridge dzac000 233 dzzsp58025 api mn195006 from 2/4/8mb mot dr...

  • Page 332

    332 apr 2002 edition 2.0 dp-1510p/1810p /1810f/2010e 6.5.2. System control circuit the system control block consists of the following ic that control the general functions. Sdram 8mb sdram 8mb cpu sh2 (ic1) msc dzac000166 (ic5) f-rom 4mb program (ic10) f-rom 2mb (dp-1810f only) (dp-1810f only) (dp-2...

  • Page 333

    333 dp-1510p/1810p /1810f/2010e apr 2002 edition 2.0 1. System cpu the system cpu (sh7041) is a 32-bit risc (reduced instruction set computer) type of cpu and dma control, serial communication port, timer control, interrupt control, dram control, and i/o port are integrated into 1 chip. Mask rom (64...

  • Page 334

    334 apr 2002 edition 2.0 dp-1510p/1810p /1810f/2010e 6.5.3. Image data circuit the image data circuit is independent of system circuit from page memory / sort memory circuit due to high speed scanning and printing. As a result of this, all image data is managed by the image data circuit and only cod...

  • Page 335

    335 dp-1510p/1810p /1810f/2010e apr 2002 edition 2.0 1. Document adaptor for new copier engine (gate array) dzac000234 (dance) is a document adaptor for new copier engine (gate array) and provides the image control peripheral function and recording data control. • dma control it is used to transfer ...

  • Page 336

    336 apr 2002 edition 2.0 dp-1510p/1810p /1810f/2010e • synchronization control circuit this circuit is used to synchronize the output of the recorded data with the horizontal synchronizing output signal from the printer for each line. The ipc controls the resolution of the printer as follows. • fifo...

  • Page 337

    337 dp-1510p/1810p /1810f/2010e apr 2002 edition 2.0 6.5.4. Scanning circuit 1. Scanning lsi mn86076 (ic51) is a scanning lsi and generates shading correction, mtf correction, reduction/ enlargement, and gray scale error diffusion. The image signal is converted to binary signal and transported. 2. S...

  • Page 338

    338 apr 2002 edition 2.0 dp-1510p/1810p /1810f/2010e 6.5.5. Coding coding and decoding (mh/mr/mmr/jbig conversion) is carried out by the hardware codec device. • pm-22c (ic33) : for image codec it codes or decodes the data transferred from sort memory. When copying, this codec codes from the image d...

  • Page 339

    339 dp-1510p/1810p /1810f/2010e apr 2002 edition 2.0 6.5.7. Sleep mode note: when the 10/100 ethernet interface / internet fax kit is installed, the sleep mode is disabled. This function reduces the power consumption in standby mode. During sleep mode, power is supplied only to the energy saver lamp...

  • Page 340

    340 apr 2002 edition 2.0 dp-1510p/1810p /1810f/2010e 6.5.8. Signal routing 1. Memory transmission (dp-1810f only) 2. Memory reception (dp-1810f only) s-dram from(font rom) font dram (buffer) : oti data from (image) program transfer dram (line memory) : coded data dram (buffer) msc(dmatransfer) mn860...

  • Page 341

    341 dp-1510p/1810p /1810f/2010e apr 2002 edition 2.0 3. Copy 4. Skyshot dance (dzac000234) (option) (option) f-rom (program) ipc block pec block s-dram sh7041 (cpu) f-rom (cgrom) pdl msc (dzac000166) dram inet prif (1284) ccd lp pm-1075 bridge (dzac000233) codec (pm-22c) mn86076 a/d inside sram d-bu...

  • Page 342

    342 apr 2002 edition 2.0 dp-1510p/1810p /1810f/2010e 5. Scan into memory 6. File print from memory s-dram sort memory s-dram page memory dram (work) from (image) note: 1) for sort copy, steps & . 2) for fax, steps to for dp-1810f only. S-dram page memory s-dram sort memory dram (work) from (image) n...

  • Page 343

    343 dp-1510p/1810p /1810f/2010e apr 2002 edition 2.0 7. Report/list printing 8. Pc scanning mode (binary/gray scale scanning) s-dram page memory s-dram sort memory dram (work) from (image) note: for sort copy print, from . Dram (work) s-dram page memory dance (dzac000234) (option) f-rom (program) ip...

  • Page 344

    344 apr 2002 edition 2.0 dp-1510p/1810p /1810f/2010e 9. Printer i/f (pdl) dram (work) s-dram page memory dance (dzac000234) (option) f-rom (program) ipc block pec block sh7041 (cpu) s-dram f-rom (cgrom) pdl msc (dzac000166) prif (1284) ccd lp pm-1075 bridge (dzac000233) codec (pm-22c) mn86076 a/d sr...

  • Page 345

    345 dp-1510p/1810p /1810f/2010e apr 2002 edition 2.0 6.5.9. Panel pc board this panel pc board consists of panel control sub-cpu, led, and key switch. The sub-cpu receives the command of async serial data from sc pcb and executes lcd display, led lamp, switching scan, key touch sound, and alarm soun...

  • Page 346

    346 apr 2002 edition 2.0 dp-1510p/1810p /1810f/2010e the machine will emerge from sleep mode under the following conditions: 1. Push on energy saver key 2. Original sensor actuated (adf option) 3. Data signal from printer i/f 4. Platen cover open 5. Ringing signal detected (dp-1810f only). 6. Off-ho...

  • Page 347

    347 dp-1510p/1810p /1810f/2010e apr 2002 edition 2.0 6.5.10. Laser printer motor drive circuit 1. System description it consists of 16 bit cpu m30802. The cpu controls mechanism of laser printer, fuser lamp temperature, and laser unit. 2. Reset circuit this circuit consists of ic301 (pst575e) and pe...

  • Page 348

    348 apr 2002 edition 2.0 dp-1510p/1810p /1810f/2010e 3. Printer motor drive circuit this printer motor is a brushless dc motor. The printer motor is powered by +24 vdc supply. When the interlocks are open, the +24 vdc supply is cut off and the printer motor stops rotating. Nmmon : when the signal le...

  • Page 349

    349 dp-1510p/1810p /1810f/2010e apr 2002 edition 2.0 4. Fuser lamp drive circuit it consists of 1 fuser lamp and fuser lamp is controlled by the htc pc board. The fuser lamp is powered by 100 vac. When the cn766, pin 2 (nssr) on the htc pcb goes low, the fuser lamp turns on. This lights up the pc101...

  • Page 350

    350 apr 2002 edition 2.0 dp-1510p/1810p /1810f/2010e 5. Fuser temperature control circuit the fuser temperature is controlled by ic1 on the lpc3 pc board, which contains a/d (analog/digital) converters. Ic1 adjusts temperature, observing thermistor and voltages separated by r61 with a/d converters. ...

  • Page 351

    351 dp-1510p/1810p /1810f/2010e apr 2002 edition 2.0 6. Interlock safety circuit this safety circuit turns off the +24 vdc and +5 vdc supply voltages when the front door cover is opened. When the front door cover is opened, the microswitch(es) on the ils pc board are de- actuated, turning off +24 vd...

  • Page 352

    352 apr 2002 edition 2.0 dp-1510p/1810p /1810f/2010e 7. Lsu control circuit the laser control signals are described below. Actual data is sent from sc pcb to lsu. Video+ : actual data is outputted by these 2 signals. Video- ns/h : laser power sample/hold timing signal. Nhsync : this horizontal synch...

  • Page 353: 7 Installation

    353 dp-1510p/1810p /1810f/2010e apr 2002 edition 2.0 7 installation 7.1. Precautions during set up copy machine performance and the copy quality is subject to and dependant on environmental conditions. To maintain good performance, quality, and safe operation, observe the following precautions: 1. F...

  • Page 354

    354 apr 2002 edition 2.0 dp-1510p/1810p /1810f/2010e 7.3.1. Installation procedure (1) open the platen cover or the adf. (2) remove 3 silver screws. (3) remove the left platen cover. (4) remove the orange tape. (5) remove 1 blue screw. (6) remove the metal shipping bracket by rotating counter-clockw...

  • Page 355

    355 dp-1510p/1810p /1810f/2010e apr 2002 edition 2.0 (11) open the right cover. (12) remove the protective sheet. (13) release 2 pressure levers as illustrated. (14) remove the protection paper from the process unit. (15) shake the new toner bottle four or five times to loosen the contents. (16) rem...

  • Page 356

    356 apr 2002 edition 2.0 dp-1510p/1810p /1810f/2010e note: set the parameter for f5-73 [pm (opc drum)] and/or f5-74 [pm (process unit)] to “user” if the replacement will be done by the user. (17) align the key of the toner bottle with the key alignment channel of the bottle holder. (18) insert the b...

  • Page 357

    357 dp-1510p/1810p /1810f/2010e apr 2002 edition 2.0 7.4. Adjustment 7.4.1. Exposure (standard adjustment) the following values will be added to the reference value. Do not adjust these codes in the field. F6-18 : laser power compensation f6-19 : developer bias standard voltage compensation 1. Press...

  • Page 358

    358 apr 2002 edition 2.0 dp-1510p/1810p /1810f/2010e 7.4.3. Leading edge adjustment (scanner) (1) make sure that the scanner unit is at initial position. (2) remove 3 silver screws and remove left platen cover. (3) loosen the left edge screw (a) turning counter-clockwise 1 or 2 rounds. (4) adjust th...

  • Page 359: 8 Options And Supplies

    359 dp-1510p/1810p /1810f/2010e apr 2002 edition 2.0 8 options and supplies 8.1. Installing the 10/100 ethernet interface / internet fax kit (da-ne200) 8.1.1. Contents required for dp-1510p/1810p/1810f/2010e note: the part number differs depending on the destination. Refer to the parts manual. This ...

  • Page 360

    360 apr 2002 edition 2.0 dp-1510p/1810p /1810f/2010e (3) secure the lanb pc board onto the bracket with 3 screws (xyn3+f8). (4) connect the lanb-lanc harness to cn5 and cn6 on the lanb pc board. (5) install the lanb pc board assembly. (6) secure the lanb pc board assembly with 2 screws (xtb3+8j). (7...

  • Page 361

    361 dp-1510p/1810p /1810f/2010e apr 2002 edition 2.0 note: remove the lanc pc board from lanc bk assembly (dzhp004034). (lanc bracket : dzjb000166 : not used) (11) connect the lanb-lanc harness to cn200 on the lanc pc board. (12) install the lanc pc board and secure with 2 screws (xyn3+f8). (13) pro...

  • Page 362

    362 apr 2002 edition 2.0 dp-1510p/1810p /1810f/2010e 8.2. Installing the pcl6 emulation kit (da-pc210) 8.2.1. Contents required for dp-1510p/1810p/1810f/2010e note: the part number differs depending on the destination. Refer to the parts manual. This kit contains additional parts to install this opt...

  • Page 363

    363 dp-1510p/1810p /1810f/2010e apr 2002 edition 2.0 (4) insert the locking spacer (dzjh000063) into the mounting hole on the machine chassis. (5) install the ep pc board assembly. (6) insert the locking spacer into the ep pc board assembly. (7) 1 screw (xtb3+8j). (8) proceed with the installation o...

  • Page 364

    364 apr 2002 edition 2.0 dp-1510p/1810p /1810f/2010e 8.3. Installing the sorting image memory 8/16/64/128 mb (da-sm08b/16b/64b/28b) 8.3.1. Contents 8.3.2. Installation note: turn the power switch to the off (o) position and unplug the ac power cord before beginning installation. Qty. Description par...

  • Page 365

    365 dp-1510p/1810p /1810f/2010e apr 2002 edition 2.0 8.4. Installing the automatic document feeder (da-as180) for dp-1510p/1810p/2010e 8.4.1. Contents note: the part number differs depending on the destination. Refer to the parts manual. 8.4.2. Installation note: turn the power switch to the off (o)...

  • Page 366

    366 apr 2002 edition 2.0 dp-1510p/1810p /1810f/2010e (4) remove 7 screws. (5) remove the rear plate. (6) bend the protective tab on the rear plate further than 90 ° as illustrated on the left. (7) connect the harness to cn3 on the sc pc board. (8) insert the harness clamp into a pre-drilled hole in ...

  • Page 367

    367 dp-1510p/1810p /1810f/2010e apr 2002 edition 2.0 (11) peel off the 2 adhesive protectors from the scanning pad. (12) place the scanning pad on the glass, aligning with the upper left corner, keeping 1mm space as shown on the left. (13) close the adf. Note: re-open the adf unit and push the scann...

  • Page 368

    368 apr 2002 edition 2.0 dp-1510p/1810p /1810f/2010e (21) if the document is skewed to the left, set the adjusting bracket to the left and secure with 1 screw. Left document leading edge skewed to the left.

  • Page 369

    369 dp-1510p/1810p /1810f/2010e apr 2002 edition 2.0 document adjustment amount printed image adjustment remarks no. 90 adf detection timing no. 93 adf original trailing edge registration no. 94 adf magnification ratio (top feed) no. 91 adf original leading edge registration adjust the adf unit to s...

  • Page 370

    370 apr 2002 edition 2.0 dp-1510p/1810p /1810f/2010e 8.5. Installing the inverting automatic document feeder (da-ar201) for dp-2010e 8.5.1. Contents note: the part number differs depending on the destination. Refer to the parts manual. 8.5.2. Installation note: turn the power switch to the off (o) p...

  • Page 371

    371 dp-1510p/1810p /1810f/2010e apr 2002 edition 2.0 (3) using a slotted blade screwdriver, remove the ops actuator as illustrated. (4) install the i-adf ops actuator. (5) install the 2 adf mounting brackets. (6) secure the 2 brackets with 6 screws (xtb3+12j) as illustrated. Note: the remaining 2 sc...

  • Page 372

    372 apr 2002 edition 2.0 dp-1510p/1810p /1810f/2010e (8) install the i-adf on top of the adf mounting brackets. Note: a. Set the i-adf in the direction of the arrow. B. Align the hallmark on the right side of the hinge base and the adf mounting bracket as illustrated. (9) tighten the 2 thumb screws ...

  • Page 373

    373 dp-1510p/1810p /1810f/2010e apr 2002 edition 2.0 (20) secure the i-adf rear support bracket with 4 screws (xtb3+8j). (21) secure the i-adf rear support bracket with 2 screws (xtb3+12j). (22) using a 20 lb (80 g/m2) lined original, make a copy from the adf to check the feed alignment. (23) check ...

  • Page 374

    374 apr 2002 edition 2.0 dp-1510p/1810p /1810f/2010e (25) if there is no space, adjust the platen glass position by following the procedure below: a. Open the adf unit. B. Remove 3 silver screws. C. Remove the left platen cover. D. Loosen 2 screws. E. Shift the scanning glass guide to the left and t...

  • Page 375

    375 dp-1510p/1810p /1810f/2010e apr 2002 edition 2.0 document adjustment amount printed image adjustment remarks no. 90 adf detection timing no. 93 adf original trailing edge registration no. 94 adf magnification ratio (top feed) no. 91 adf original leading edge registration adjust the adf unit to s...

  • Page 376

    376 apr 2002 edition 2.0 dp-1510p/1810p /1810f/2010e 8.6. Installing the 2nd/3rd/4th paper feed module (da-ds182/183) 8.6.1. Contents 2nd/4th paper feed module (da-ds182) 3rd paper feed module (da-ds183) note: the part number differs depending on the destination. Refer to the parts manual. 8.6.2. In...

  • Page 377

    377 dp-1510p/1810p /1810f/2010e apr 2002 edition 2.0 (2) remove 7 silver screws. (3) remove the rear plate. (4) install 2 guide-pins. (5) place the machine on top of the 2nd paper feed module as illustrated on the left. (6) secure the 2nd paper feed module with 5 screws (xtb3+8j). (2) (3) (4) (5) (6...

  • Page 378

    378 apr 2002 edition 2.0 dp-1510p/1810p /1810f/2010e (7) remove 2 silver screws (2nd paper feed module). (8) remove the cst rear cover. (9) connect one end of the cst4 harness (with ferrite core) to cn731 on the lpc3 pc board. (10) insert the other end of the harness through the bottom opening in th...

  • Page 379

    379 dp-1510p/1810p /1810f/2010e apr 2002 edition 2.0 8.6.3. Installing the 2nd and 3rd paper feed modules together for dp-1810f/2010e (except dp-2010e for usa and canada) note: turn the power switch to the off (o) position and unplug the ac power cord before beginning installation. (1) slide the pap...

  • Page 380

    380 apr 2002 edition 2.0 dp-1510p/1810p /1810f/2010e (8) slide the 2nd paper tray all the way out. (9) place the 2nd paper feed module on top of the 3rd paper feed module as illustrated on the left. (10) secure the 2nd paper feed module with 5 screws (xtb3+8j). (11) re-install the 2nd paper tray. (1...

  • Page 381

    381 dp-1510p/1810p /1810f/2010e apr 2002 edition 2.0 (14) secure the 2nd paper feed module with 5 screws (xtb3+8j). (15) remove 2 silver screws (3rd paper feed module). (16) remove the cst rear cover. (17) connect one end of the cst4 harness (with ferrite core) to cn731 on the lpc3 pc board. (18) in...

  • Page 382

    382 apr 2002 edition 2.0 dp-1510p/1810p /1810f/2010e 8.6.4. Installing the 3rd paper feed module for dp-2010e (for usa and canada) note: turn the power switch to the off (o) position and unplug the ac power cord before beginning installation. (1) slide the 2nd paper tray all the way out. (2) remove ...

  • Page 383

    383 dp-1510p/1810p /1810f/2010e apr 2002 edition 2.0 (6) secure the 3rd paper feed module with 5 screws (xtb3+8j). (7) remove 2 silver screws (3rd paper feed module). (8) remove the cst rear cover. (9) connect one end of the cst4 harness (with ferrite core) to cn777 on the cst4 pc board of the 2nd p...

  • Page 384

    384 apr 2002 edition 2.0 dp-1510p/1810p /1810f/2010e 8.6.5. Installing the 2nd, 3rd and 4th paper feed modules together for dp-1810f/2010e (except dp-2010e for usa and canada) note: turn the power switch to the off (o) position and unplug the ac power cord before beginning installation. (1) slide th...

  • Page 385

    385 dp-1510p/1810p /1810f/2010e apr 2002 edition 2.0 (8) slide the 2nd and 3rd paper trays all the way out. (9) place the 3rd paper feed module on top of the 4rd paper feed module and then place the 2nd paper feed module on top of the 3rd paper feed module as illustrated on the left. (10) secure the...

  • Page 386

    386 apr 2002 edition 2.0 dp-1510p/1810p /1810f/2010e (14) secure the 2nd paper feed module with 5 screws (xtb3+8j). (15) remove 4 silver screws (3rd and 4th paper feed modules). (16) remove 2 cst rear covers. (17) connect one end of the cst4 harness (with ferrite core) to cn731 on the lpc3 pc board....

  • Page 387

    387 dp-1510p/1810p /1810f/2010e apr 2002 edition 2.0 (27) set the paper size guide. (28) secure with 3 screws which are stored inside of the paper tray, if necessary..

  • Page 388

    388 apr 2002 edition 2.0 dp-1510p/1810p /1810f/2010e 8.6.6. Installing the 3rd and 4th paper feed modules together for dp-2010e (for usa and canada) note: turn the power switch to the off (o) position and unplug the ac power cord before beginning installation. (1) slide the 2nd paper tray all the wa...

  • Page 389

    389 dp-1510p/1810p /1810f/2010e apr 2002 edition 2.0 (8) install 2 guide-pins. (9) place the machine on top of the 3rd paper feed module as illustrated on the left. (10) secure the 3rd paper feed module with 5 screws (xtb3+8j). (11) remove 4 silver screws (3rd and 4th paper feed modules). (12) remov...

  • Page 390

    390 apr 2002 edition 2.0 dp-1510p/1810p /1810f/2010e (13) connect one end of the cst4 harness (with ferrite core) to cn777 on the cst4 pc board of the 2nd paper feed module. (14) insert the other end of the harness through the bottom opening in the frame. (15) connect the cst4 harness to cn776 on th...

  • Page 391

    391 dp-1510p/1810p /1810f/2010e apr 2002 edition 2.0 8.7. Installing the handset kit 8.7.1. Contents note: the part number differs depending on the destination. Refer to the parts manual. 8.7.2. Installation for dp-1810f note: turn the power switch to the off (o) position and unplug the ac power cor...

  • Page 392

    392 apr 2002 edition 2.0 dp-1510p/1810p /1810f/2010e 8.8. Installing the dehumidifier heater kit 8.8.1. Contents a. For main unit (dztq000032) no. Qty. Description part no. Remarks 1 1 rlb pc board dzec102305 2 1 rlb bracket dzja001155 3 1 ptc-ac harness 1 dzfp001281 4 1 ptc-ac harness 2 dzfp001282 ...

  • Page 393

    393 dp-1510p/1810p /1810f/2010e apr 2002 edition 2.0 b. For 2nd/3rd/4th paper feed module (dztq000033) no. Qty. Description part no. Remarks 1 3 ptc-ac harness 6 dzfp001315 2 1 ptc-ac harness 7 dzfp001341 3 2 ptc-ac harness 8 dzfp001342 4 3 ptc heater ffpcp0035 5 3 heater bracket ffpkd07791 6 3 prot...

  • Page 394

    394 apr 2002 edition 2.0 dp-1510p/1810p /1810f/2010e 8.8.2. Installation note: turn the power switch to the off (o) position and unplug the ac power cord before beginning installation. (1) remove the process unit. (refer to ch 2.2.1 of the service manual) (2) remove the front cover, inner cover j, l...

  • Page 395

    395 dp-1510p/1810p /1810f/2010e apr 2002 edition 2.0 (12) connect the ptc heater to the ptc-ac harness 3. (13) route the ptc heater to the upper compornent of the frame through the access hole as illustrated. (14) mount the ptc heater onto the dehumidifier bracket. (15) install the ptc heater assemb...

  • Page 396

    396 apr 2002 edition 2.0 dp-1510p/1810p /1810f/2010e (18) install 4 clamps as illustrated. (19) insert the ptc-ac harness 3 into 3 clamps. (20) move the lamp base assembly slowly toward the right, positioning the bracket near the center (marked by (a) as illustrated). (21) mount the thermistor onto ...

  • Page 397

    397 dp-1510p/1810p /1810f/2010e apr 2002 edition 2.0 (25) insert the harness of the thermistor into 3 clamps as illustrated. (26) connect the ptc-ac harness 2 to cn173 on the rlb pc board. (27) connect the harness of the thermistor and ptc-ac harness 3 to ptc-ac harness 2. (28) mount the ptc heater ...

  • Page 398

    398 apr 2002 edition 2.0 dp-1510p/1810p /1810f/2010e (29) install the ptc heater assembly. (30) secure the ptc heater assembly with 1 screw. (31) connect the ptc-ac harness 4 to cn172 on the rlb pc board. (32) connect the ptc-ac harness 4 to ptc heater harness. (33) insert the ptc-ac harness 4 into ...

  • Page 399

    399 dp-1510p/1810p /1810f/2010e apr 2002 edition 2.0 (37) connect the ptc heater harness to ptc-ac harness 6. (38) remove the cst rear cover. (refer to ch 8.5. Of the service manual) (39) install 6 clamps as illustrated. (40) insert the ptc-ac harness 6 into 4 clamps. (41) the procedure for 3rd and ...

  • Page 400

    400 apr 2002 edition 2.0 dp-1510p/1810p /1810f/2010e (49) connect the ptc-ac harness 7 to ptc-ac harness 8. (50) insert the other end of the harness through the bottom opening in the frame. (51) the procedure for 3rd and 4th paper feed modules is the same as steps (47)~(50). (52) break off the prote...

  • Page 401

    401 dp-1510p/1810p /1810f/2010e apr 2002 edition 2.0 8.9. Installing the key counter cable kit (da-kh200) 8.9.1. Contents note: the key counter is sold separately. 8.9.2. Installation note: turn the power switch to the off (o) position and unplug the ac power cord before beginning installation. Qty....

  • Page 402

    402 apr 2002 edition 2.0 dp-1510p/1810p /1810f/2010e (7) re-install the rear plate as shown on the left. (8) secure the rear plate with 7 screws. (8) (7).

  • Page 403

    403 dp-1510p/1810p /1810f/2010e apr 2002 edition 2.0 8.10. Replacing the opc drum (1) open the right cover. (2) open the front door cover. (3) remove the toner waste container by slowly pulling it towrds the left as illustrated. (4) seal the container with the enclosed cap and dispose of it properly...

  • Page 404

    404 apr 2002 edition 2.0 dp-1510p/1810p /1810f/2010e (8) unlock the front opc bushing assembly by turning it clockwise. (9) push the opc drum forward from the rear end as illustrated. (10) remove the front opc bushing assembly. (11) remove the opc drum as shown in the illustration, holding by the fr...

  • Page 405

    405 dp-1510p/1810p /1810f/2010e apr 2002 edition 2.0 (14) reinstall the front opc bushing assembly and turn it counter-clockwise to lock it in place. (15) remove the protective film from the opc drum. (16) turn the opc drum assembly in the direction of the arrow until it locks by the 2 opc latches. ...

  • Page 406

    406 dp-1510p/1810p /1810f/2010e apr 2002 edition 2.0 9 schematic diagram 9.1. General circuit diagram system circuit a b c d 1 2 3 4 2 1 3 4 drawing name general circuit diagram (1/5) model dp-1510p/1810p /1810f/2010e 1 2 60 68 67 66 65 64 63 62 61 60 68 67 66 65 64 63 62 61 59 58 57 56 55 54 53 52 ...

  • Page 407

    407 dp-1510p/1810p /1810f/2010e apr 2002 edition 2.0 a b c d 1 2 3 4 2 1 3 4 drawing name general circuit diagram (2/5) model dp-1510p/1810p /1810f/2010e 8 14 iod[5] 60 ncs09 9 25 39 51 61 +5vp 52 rdp n.C. Iod[1 1] cn123 +3.3v al[4] cn200 n.C. 290a-88-30-335 iod[0] 2 25 fak8771 15 iod[13] iod[12] fx...

  • Page 408

    408 dp-1510p/1810p /1810f/2010e apr 2002 edition 2.0 a b c d 1 2 3 4 2 1 3 4 drawing name general circuit diagram (3/5) model dp-1510p/1810p /1810f/2010e 4 ns/h 4 dc motor 1 8 3 +5v 5 gnd 6 4 2 laser unit development 3 1 +5v lsu charge 2 +24vm (am51632) df1 1-10dp-2dsa drclk 15 ldmf4 14 npchk1 npmon...

  • Page 409

    409 dp-1510p/1810p /1810f/2010e apr 2002 edition 2.0 a b c d 1 2 3 4 2 1 3 4 drawing name general circuit diagram (4/5) model dp-1510p/1810p /1810f/2010e thermalfuse cn762 tlp1242(c6) ac(l) 4 2 +5v fuser lamp mgnd cn764 +5v 5 cn60 1 1 2 ac(l) 3 nssr cn761 1 1 (black) (fbu8715) 6 (white) 6 pzcin lvps...

  • Page 410

    410 dp-1510p/1810p /1810f/2010e apr 2002 edition 2.0 a b c d 1 2 3 4 2 1 3 4 drawing name general circuit diagram (5/5) model dp-1510p/1810p /1810f/2010e padf3a pmrclh3a 10 n3mona 4 puplimit3 (dzep000749x) 5 9 njamdor3 nfdpchk3 7 3 16 6 1 n3mrdy mgnd cn731 53313-4015 gnd 2 (fbu8737) 13 8 14 lpc3 pli...

  • Page 411

    411 dp-1510p/1810p /1810f/2010e apr 2002 edition 2.0 9.2. Sc pc board a b c d 1 2 3 4 2 1 3 4 drawing name model sc pc board (1/30) cpdrac[0] 002:d1 c12 25v 0.1uf d[0] 002:a2;003:a3;004:a4;008:b1;018:a1 ncash 002:a3 ncs2 002:a3;003:c4 a[2] 002:a1;003:c1;004:a2;007:a1;008:a1;018:a2 r13 220 d[4] 002:a...

  • Page 412

    412 dp-1510p/1810p /1810f/2010e apr 2002 edition 2.0 a b c d 1 2 3 4 2 1 3 4 drawing name model sc pc board (2/30) nwrl 001:d2;003:d2;008:b2;018:a2 ncpdreq[1] 001:c2 r34 47k iod[9] 003:d2;005:b2;011:b2;013:b2;014:b2;026:d4;028:c3;029:b2;030:b2 +3.3v d[4] 001:a2;003:a3;004:a4;008:b1;018:a1 ncs2 001:d...

  • Page 413

    413 dp-1510p/1810p /1810f/2010e apr 2002 edition 2.0 a b c d 1 2 3 4 2 1 3 4 drawing name model sc pc board (3/30) nmb4 006:a2 nopm11 006:a2 drma[3] 002:d4 a[6] 001:c1;002:a1;004:a2;007:a2;008:a1 gnd drma[4] 002:d4 a[7] 001:c1;002:a1;004:a2;007:a2;008:a1 c42 25v 0.1uf gnd nmwrm 002:d3 d[0] 001:a1;00...

  • Page 414

    414 dp-1510p/1810p /1810f/2010e apr 2002 edition 2.0 a b c d 1 2 3 4 2 1 3 4 drawing name model sc pc board (4/30) a[13] 001:c1;002:a2;003:c2 a[10] 001:c1;002:a2;003:c2;007:a3;008:a2 a[11] 001:c1;002:a2;003:c2;007:a3;008:a2 a[1] 001:c1;002:a1;003:c1;007:a1;008:a1;018:a2 d[15] 001:a2;002:a3;003:a4;00...

  • Page 415

    415 dp-1510p/1810p /1810f/2010e apr 2002 edition 2.0 a b c d 1 2 3 4 2 1 3 4 drawing name model sc pc board (5/30) niodack[4] 002:c1 niodack[5] 002:c1 na[0] 002:d3 iod[1] 002:d1;003:d1;006:b3;011:b2;013:b2;014:b2;026:d4;028:c3;029:b2;030:b1 iod[2] 002:d1;003:d1;006:b3;011:b2;013:b2;014:b2;026:d4;028...

  • Page 416

    416 dp-1510p/1810p /1810f/2010e apr 2002 edition 2.0 a b c d 1 2 3 4 2 1 3 4 drawing name model sc pc board (6/30) ic14 dzzsp58025 90 55 iol7 52 iol6 51 iol5 83 io10 84 io11 85 io12 86 io13 87 io14 88 io15 89 io16 92 io17 56 io20 57 io21 58 io22 59 io23 60 io24 61 io25 62 io26 63 io27 46 iol0 47 iol...

  • Page 417

    417 dp-1510p/1810p /1810f/2010e apr 2002 edition 2.0 a b c d 1 2 3 4 2 1 3 4 drawing name model sc pc board (7/30) tc74vhct244af ic15 *g 1 a2 4 y2 16 a3 6 y3 14 a1 2 a4 8 y1 18 y4 12 tc74vhct244af ic15 *g 19 a2 13 y2 7 a3 15 y3 5 a1 11 a4 17 y1 9 y4 3 tc74vhct244af ic16 *g 1 a2 4 y2 16 a3 6 y3 14 a1...

  • Page 418

    418 dp-1510p/1810p /1810f/2010e apr 2002 edition 2.0 a b c d 1 2 3 4 2 1 3 4 drawing name model sc pc board (8/30) +3.3va 25v 0.1uf c84 gnd abitclk 009:d1;009:d3 nspon 006:c2 gnd +3.3v 25v 0.1uf c83 47k r116 gnd 50.0v 18pf c182 62.5mw 100k r85 amgnd 47k 62.5mw r120 ba4558f ic9 v- 4 v+ 8 50.0v 15pf c...

  • Page 419

    419 dp-1510p/1810p /1810f/2010e apr 2002 edition 2.0 a b c d 1 2 3 4 2 1 3 4 drawing name model sc pc board (9/30) 25.0v 1000pf c502 0.0 1000pf c260 50v 0.1uf c453 4.87k 1% 250mw r557 33k 250mw r539 1sr154-400 d20 k a ma157 d21 21 3 15k 62.5mw r586 80 2sc3588 q5 2 4 3 1 1sr154-400 d18 ka 47 62.5mw r...

  • Page 420

    420 dp-1510p/1810p /1810f/2010e apr 2002 edition 2.0 a b c d 1 2 3 4 2 1 3 4 drawing name model sc pc board (10/30) 50v 0.1uf c137 +24vf c129 50v 1000pf r159 27k r158 10k cn111 9 blm21p300s nf11 cn111 3 50v 0.1uf c135 r151 27k pcmld 006:c3 cn111 2 +5v c134 50v 1000pf nhkof 001:d3;021:a2 gnd ncton 00...

  • Page 421

    421 dp-1510p/1810p /1810f/2010e apr 2002 edition 2.0 a b c d 1 2 3 4 2 1 3 4 drawing name model sc pc board (11/30) iod[0] 002:d1;003:d1;005:b2;006:b3;013:b2;014:b2;026:d3;028:c2;029:b2;030:b1 iod[14] 002:d1;003:d2;005:b2;013:b2;014:b2;026:d4;028:c3;029:c2;030:b2 ma[0] 016:a4 ma[4] 016:a4 ma[5] 016:...

  • Page 422

    422 dp-1510p/1810p /1810f/2010e apr 2002 edition 2.0 a b c d 1 2 3 4 2 1 3 4 drawing name model sc pc board (12/30) pmd[14] 016:a1 npsdwe 011:d3 pmd[0] 016:a3 npsdcas 011:d3 pmd[5] 016:a2 pmd[6] 016:a2 pmd[15] 016:a1 pmd[11] 016:a1 pmd[12] 016:a1 pmd[2] 016:a2 pmd[1] 016:a3 pmd[3] 016:a2 pmd[9] 016:...

  • Page 423

    423 dp-1510p/1810p /1810f/2010e apr 2002 edition 2.0 a b c d 1 2 3 4 2 1 3 4 drawing name model sc pc board (13/30) od[3] 014:b3 c204 50v 1000pf od[4] 014:b3 od[12] 014:b3 +3.3v od[5] 014:b3 od[13] 014:b3 od[6] 014:b3 niopmrst 007:d4;030:c1 ncs02 002:d2;030:b3 od[11] 014:b3 iod[4] 002:d1;003:d1;005:...

  • Page 424

    424 dp-1510p/1810p /1810f/2010e apr 2002 edition 2.0 a b c d 1 2 3 4 2 1 3 4 drawing name model sc pc board (14/30) iod[6] 002:d1;003:d1;005:b2;006:b3;011:b2;013:b2;026:d4;028:c3;029:c2;030:b1 piodreq[6] 002:c1;030:b3 iod[3] 002:d1;003:d1;005:b2;006:b3;011:b2;013:b2;026:d4;028:c3;029:c2;030:b1 al[2]...

  • Page 425

    425 dp-1510p/1810p /1810f/2010e apr 2002 edition 2.0 a b c d 1 2 3 4 2 1 3 4 drawing name model sc pc board (15/30) smemid[0] 006:a2;030:b4 smemid[1] 006:a2;030:b4 smemid[2] 006:a3;030:b4 nbcke 014:c4 nbmwt 014:d3 nbcs[0] 014:d3 nbcs[2] 014:d3 nbcs[3] 014:d3 nbcs[4] 014:d3 nbcs[5] 014:d3 nbras 014:d...

  • Page 426

    426 dp-1510p/1810p /1810f/2010e apr 2002 edition 2.0 a b c d 1 2 3 4 2 1 3 4 drawing name model sc pc board (16/30) md[15] 011:d3 md[14] 011:d3 md[13] 011:d3 md[12] 011:d3 pmd[15] 012:a4 pmd[14] 012:a4 pmd[13] 012:a4 pmd[12] 012:a4 pmd[10] 012:a4 md[11] 011:d3 md[9] 011:d2 md[10] 011:d2 pmd[9] 012:a...

  • Page 427

    427 dp-1510p/1810p /1810f/2010e apr 2002 edition 2.0 a b c d 1 2 3 4 2 1 3 4 drawing name model sc pc board (17/30) nc7sz125m ic47 1 4 2 gnd nc7sz125m ic47 gnd 3 vcc 5 +3.3v gnd 25v 0.1uf c269 sn65lvds1dbv ic49 y 4 d 5 z 3 vcc 1 2 gnd gnd pi90lv017a ic48 d+ 7 di 2 d- 8 vcc 1 4 gnd 5 nc 6 nc 3 gnd 25...

  • Page 428

    428 dp-1510p/1810p /1810f/2010e apr 2002 edition 2.0 a b c d 1 2 3 4 2 1 3 4 drawing name model sc pc board (18/30) super pyxion mn86076 ic51 cpuck 105 a0 101 a1 102 *cs 117 *rd 118 *wd 119 *reset 104 *irq 120 sdreq 121 *sdack 123 drak 122 ad1d0 16 ad1d1 17 ad1d2 18 ad1d3 19 ad1d4 20 ad1d5 21 ad1d6 ...

  • Page 429

    429 dp-1510p/1810p /1810f/2010e apr 2002 edition 2.0 a b c d 1 2 3 4 2 1 3 4 drawing name model sc pc board (19/30) 1k r302 1k r303 agnd an2190fhq ic54 25 vcaout_odd 27 vca_dc_odd 19 a/dout 4 cds_even 34 coa_dc_odd 48 ccdout_in2 35 37 ccdout_in4 1 ccdout_in1_even 31 dac_ch4 5 dac_ch1 23 cp2_pulse_in...

  • Page 430

    430 dp-1510p/1810p /1810f/2010e apr 2002 edition 2.0 a b c d 1 2 3 4 2 1 3 4 drawing name model sc pc board (20/30) blm21p300s nf37 16.0v 10.0uf c294 21 25v 0.1uf c296 +5v gnd fck1 018:a4;020:a4 fck2 018:a4;020:a4 fcp 018:a4;020:a4 fr 018:a4;020:a4 r297 0 r298 0 r299 0 0 r300 r301 0 cn120 2 gnd 25v ...

  • Page 431

    431 dp-1510p/1810p /1810f/2010e apr 2002 edition 2.0 a b c d 1 2 3 4 2 1 3 4 drawing name model sc pc board (21/30) q10 2sa1037ak 3 1 2 gnd gnd r355 100 c343 50v 100pf nf45 blm31p500s +5vp r350 100 c342 50v 100pf c344 50v 100pf +5v gnd +5v gnd r334 220k r341 100 +5vp r352 100 batvol 001:a3 gnd nopon...

  • Page 432

    432 dp-1510p/1810p /1810f/2010e apr 2002 edition 2.0 a b c d 1 2 3 4 2 1 3 4 drawing name model sc pc board (22/30) gnd gnd r396 33k gnd gnd gnd gnd +5vi c366 25v 0.1uf +3.3v +5vp c364 25v 0.1uf n5vlpclk 007:d2 c363 25v 0.1uf n5vcbsy 007:d2 nvsync 011:c1;017:a4 c359 16.0v 10.0uf 2 1 r392 10k npsdes ...

  • Page 433

    433 dp-1510p/1810p /1810f/2010e apr 2002 edition 2.0 a b c d 1 2 3 4 2 1 3 4 drawing name model sc pc board (23/30) ledc 025:c2 da1 024:b2 ppachg 024:b1 gnd na4sn 024:b3 25v 0.1uf c259 47k r379 nadl2 024:b3 n5vreq 001:d3 gnd 47k r374 47k r375 ledb 025:c2 pdata1a 024:b2 47k r376 5sentim 007:d4 nclock...

  • Page 434

    434 dp-1510p/1810p /1810f/2010e apr 2002 edition 2.0 a b c d 1 2 3 4 2 1 3 4 drawing name model sc pc board (24/30) na4sn 023:b2 16v 47uf c410 2 1 poac 023:b2 napwakeup 021:a3 cn3 38 cn3 39 cn3 13 33 ra72 5 4 cn3 33 cn3 2 1k ra90 5 4 ppicr 023:b3 50v 0.1uf c403 1k ra93 5 4 cn3 36 nclockad1 023:d3 1k...

  • Page 435

    435 dp-1510p/1810p /1810f/2010e apr 2002 edition 2.0 a b c d 1 2 3 4 2 1 3 4 drawing name model sc pc board (25/30) mgnd 1k ra99 6 3 tc7s32f ic69 gnd 3 vcc 5 upc393g2 ic68 + 5 7 - 6 +5v mgnd vinx 023:d4 33k r441 1k r435 50v 0.1uf c441 50v 1000pf c430 +5v 16v 10uf c428 2 1 cn9 3 pdatasa 023:d3 150k r...

  • Page 436

    436 dp-1510p/1810p /1810f/2010e apr 2002 edition 2.0 a b c d 1 2 3 4 2 1 3 4 drawing name model sc pc board (26/30) pdirab 027:a1 r486 62.5mw 1m gnd c464 50v 1000pf r472 100 naftx 027:a2 r487 1k data[1-8] 027:a1 r471 100 nfault 027:a2 pslct 027:a2 pbusy 027:a2 r484 62.5mw 0 ppe 027:a2 nack 027:a2 ns...

  • Page 437

    437 dp-1510p/1810p /1810f/2010e apr 2002 edition 2.0 a b c d 1 2 3 4 2 1 3 4 drawing name model sc pc board (27/30) cn220 12 cn220 23 r496 62.5mw 100 cn220 3 cn220 14 cn220 21 cn220 26 cn220 30 cn220 31 cn220 17 nfault 026:e3 cn220 33 cn220 6 cn220 36 cn220 9 cn220 7 cn220 10 nack 026:e3 pslct 026:e...

  • Page 438

    438 dp-1510p/1810p /1810f/2010e apr 2002 edition 2.0 a b c d 1 2 3 4 2 1 3 4 drawing name model sc pc board (28/30) nwait[2] 002:a3 nopb3 006:a2 nirqop1 002:d4 nwait[3] 002:a3;003:d3 ncs0b 002:d2 nf51 blm21p300s c384 25v 0.1uf niowrl 002:d3;006:b4;026:a3;029:c2 c390 25v 0.1uf c387 25v 0.1uf c394 100...

  • Page 439

    439 dp-1510p/1810p /1810f/2010e apr 2002 edition 2.0 a b c d 1 2 3 4 2 1 3 4 drawing name model sc pc board (29/30) cn121 55 cn121 7 iod[5] 002:d1;003:d1;005:b2;006:b3;011:b2;013:b2;014:b2;026:d4;028:c3;030:b1 cn121 57 gnd cn121 93 cn121 96 cn121 41 cn121 95 cn121 40 gnd iod[12] 002:d1;003:d2;005:b2...

  • Page 440

    440 dp-1510p/1810p /1810f/2010e apr 2002 edition 2.0 a b c d 1 2 3 4 2 1 3 4 drawing name model sc pc board (30/30) al[3] 005:b2;006:b3;007:b2;011:b1;014:b2;026:d3;028:b3;029:c1 niord 002:d2;005:b2;006:b4;011:b2;013:b3;014:b2;026:a3;028:b3;029:c2 al[4] 007:b2;011:b2;014:b2;026:d3;028:b3;029:c1 iod[6...

  • Page 441

    441 dp-1510p/1810p /1810f/2010e apr 2002 edition 2.0 9.3. Lpc3 pc board a b c d 1 2 3 4 2 1 3 4 drawing name model lpc3 pc board (1/7) 25v 0.1uf c11 25v 0.1uf c6 1k r3 50v 1000pf c1 gnd nlprst 002:b2 gnd nsbsy 002:b3 nlpsclka 002:b3 nmcmda 002:b3 nlpsta 002:b3 nhsync 002:b3;002:c2 npmcka 002:c4 ncmd...

  • Page 442

    442 dp-1510p/1810p /1810f/2010e apr 2002 edition 2.0 a b c d 1 2 3 4 2 1 3 4 drawing name model lpc3 pc board (2/7) pst575e ic2 2 out 1 vcc 4 gnd 3 cd gnd 25v 0.1uf c20 100k r24 +5v nlprst 001:a1 +5v 16v 1uf c15 50v 0.022uf c17 gnd mgnd +24v 50v 0.022uf c16 50v 0.022uf c18 100 r52 nhsync 001:d1;002:...

  • Page 443

    443 dp-1510p/1810p /1810f/2010e apr 2002 edition 2.0 a b c d 1 2 3 4 2 1 3 4 drawing name model lpc3 pc board (3/7) therma 001:d2 dtc143zka q8 3 1 2 gnd +5v gnd nssra 001:d2 gnd +5v gnd +5v gnd 4.7k r62 dtc143zka q7 3 1 2 gnd 10k r58 +5v gnd l+5v 33k r60 33k r59 pmpow 001:d4 25v 0.1uf c33 10k r72 mg...

  • Page 444

    444 dp-1510p/1810p /1810f/2010e apr 2002 edition 2.0 a b c d 1 2 3 4 2 1 3 4 drawing name model lpc3 pc board (4/7) gnd 1k r96 +5v 1k r95 gnd +5v toner 001:d2 prsena 001:b3 mgnd 1sr154-400 d7 k a +24vm plift1 001:d2 +5v puplimit1 001:d2 330 100mw r1 12 npchk1 001:d4 330 100mw r108 ncaset1 001:d4 +5v...

  • Page 445

    445 dp-1510p/1810p /1810f/2010e apr 2002 edition 2.0 a b c d 1 2 3 4 2 1 3 4 drawing name model lpc3 pc board (5/7) dtc143zka q18 3 1 2 dtc143zka q19 3 1 2 dtc143zka q20 3 1 2 dtc143zka q21 3 1 2 dtc143zka q22 3 1 2 b8b-ph-k-s cn702 1 cn702 2 cn702 3 cn702 4 cn702 5 cn702 6 cn702 7 cn702 8 +24vm pcr...

  • Page 446

    446 dp-1510p/1810p /1810f/2010e apr 2002 edition 2.0 a b c d 1 2 3 4 2 1 3 4 drawing name model lpc3 pc board (6/7) padf2a 001:d4 plift2 001:b3 npchk2 001:b3 ncaset2 001:b3 puplimit2 001:d2 nfdpchk2 001:b3 njamdor2 001:b3 gnd 50v 470pf c55 50v 470pf c54 +5v 1k r155 50v 470pf c56 1k r156 1k r154 50v ...

  • Page 447

    447 dp-1510p/1810p /1810f/2010e apr 2002 edition 2.0 a b c d 1 2 3 4 2 1 3 4 drawing name model lpc3 pc board (7/7) gnd 330 100mw r168 +5v +5v 1k r177 50v 470pf c59 gnd ndupsen1 001:b2 nopdup 001:b3 +24vm mgnd mgnd 1sr154-400 d10 k a 1sr154-400 d11 k a ma152a d12 1 3 ma152a d13 1 3 mgnd mgnd 4.7k r1...

  • Page 448

    448 dp-1510p/1810p /1810f/2010e apr 2002 edition 2.0 9.4. Adf pc board a b c d 1 2 3 4 2 1 3 4 drawing name model adf pc board (1/2) mgnd 560 2sc2412k q1 3 1 2 +5v +5v mgnd mgnd mgnd 25v 0.1uf c1 sfpb76 d1 k a ma152a d4 1 3 100k r11 nastroad1 002:b4 naclockad1 002:b4 padata1b 002:b4 padata1a 002:b4 ...

  • Page 449

    449 dp-1510p/1810p /1810f/2010e apr 2002 edition 2.0 a b c d 1 2 3 4 2 1 3 4 drawing name model adf pc board (2/2) nakeep1 001:b3 nakeep2 001:b3 napachg 001:b3 napicr 001:c2 nastamp 001:c2 naclh1 001:c2 naclh2 001:c2 naclh3 001:b3 naclockad1 001:a2 nastroad1 001:a2 padata1a 001:a1 padata1b 001:a2 da...

  • Page 450

    450 dp-1510p/1810p /1810f/2010e apr 2002 edition 2.0 9.5. Ccd pc board a b c d 1 2 3 4 2 1 3 4 drawing name model ccd pc board (1/1) 220 2sc2295 q1 3 2 1 220 2sc2295 q2 3 2 1 agnd agnd +12v +12v tc74ac08f ic1 5 6 4 tc74ac08f ic1 13 11 12 tc74ac08f ic1 10 8 9 tc74ac08f ic2 2 3 1 tc74ac08f ic2 5 6 4 t...

  • Page 451

    451 dp-1510p/1810p /1810f/2010e apr 2002 edition 2.0 9.6. Cst4 pc board a b c d 1 2 3 4 2 1 3 4 drawing name model cst4 pc board (1/1) +5v gnd mgnd mgnd mgnd mgnd +24vm mgnd +5v gnd +5v gnd 16v 10uf c1 21 50v 10uf c2 21 mgnd +24vm mgnd +5v gnd cn772 2 cn772 3 cn772 4 cn772 5 cn772 6 cn772 7 +5v b7b-...

  • Page 452

    452 dp-1510p/1810p /1810f/2010e apr 2002 edition 2.0 9.7. Pnl6 pc board a b c d 1 2 3 4 2 1 3 4 drawing name model pnl6 pc board (1/4) upd780022a ic1 p47/ad7 64 p46/ad6 63 p45/ad5 62 p44/ad4 61 p43/ad3 60 p42/ad2 59 p41/ad1 58 p40/ad0 57 p67/astb 56 p66/*wait 55 p65/*wr 54 p64/*rd 53 p75/buz 52 p74/...

  • Page 453

    453 dp-1510p/1810p /1810f/2010e apr 2002 edition 2.0 a b c d 1 2 3 4 2 1 3 4 drawing name model pnl6 pc board (2/4) evq11l04m-1 sw10 2 1 evq11l04m-1 sw4 2 1 evq11l04m-1 sw1 2 1 evq11l04m-1 sw13 2 1 evq11l04m-1 sw6 2 1 evq11l04m-1 sw9 2 1 evq11l04m-1 sw2 2 1 evq11l04m-1 sw8 2 1 evq11l04m-1 sw3 2 1 ev...

  • Page 454

    454 dp-1510p/1810p /1810f/2010e apr 2002 edition 2.0 a b c d 1 2 3 4 2 1 3 4 drawing name model pnl6 pc board (3/4) npwsw 001:d2 blcnt2 001:d2 50.0v 0.1uf c25 cn1 11 +5v cn1 1 cn1 23 50.0v 0.1uf c26 cn1 18 cn1 29 +24v +5vp 1k 0.0625w r36 cn1 14 cn1 26 cn1 22 +5vp 50.0v 470pf c24 cn1 3 cn1 16 cn1 24 ...

  • Page 455

    455 dp-1510p/1810p /1810f/2010e apr 2002 edition 2.0 a b c d 1 2 3 4 2 1 3 4 drawing name model pnl6 pc board (4/4) cn211 8 cn211 10 tl101 evq11l04m-1 sw104 2 1 cn211 6 rb441q d101 k a 5p-san cn210 1 cn211 3 cn211 15 ln376gcpx-2ut led104 2 1 ln376gcpx-2ut led116 2 1 cn211 14 gnd2 ln376gcpx-2ut led11...

  • Page 456

    456 dp-1510p/1810p /1810f/2010e apr 2002 edition 2.0 9.8. Pnl2 pc board a b c d 1 2 3 4 2 1 3 4 drawing name model pnl2 pc board (1/2) 25v 0.022uf c2 +5v led[0] 002:a2 ledct0 002:a1 ledct2 002:a1 gnd swct0 002:a4 led[2] 002:a2 +5vp led[1] 002:a2 pledslp 002:d2 ledct1 002:a1 +24v pledon0 002:c3 pledo...

  • Page 457

    457 dp-1510p/1810p /1810f/2010e apr 2002 edition 2.0 a b c d 1 2 3 4 2 1 3 4 drawing name model pnl2 pc board (2/2) pledon0 001:a3 pledon1 001:a4 ln376gcpx-2ut led7 2 1 ln376gcpx-2ut led10 2 1 lnj876lkdeab led8 2 1 lnj876lkdeab led11 2 1 +24v pledslp 001:a3 gnd led[0] 001:a3 led[1] 001:a3 ledct0 001...

  • Page 458

    458 dp-1510p/1810p /1810f/2010e apr 2002 edition 2.0 9.9. Htc pc board (120v) a b c d 1 2 3 4 2 1 3 4 drawing name model htc pc board (120v) (1/1) tp82224-31 cn760 1 tp82224-31 cn761 1 ces615an1 f101 250.0v 0.47uf c101 tf3524v102y l102 2 4 1 3 rs1abc11 sw101 1 2 4 3 250.0v 0.1uf c102 tc-14-151 l101 ...

  • Page 459

    459 dp-1510p/1810p /1810f/2010e apr 2002 edition 2.0 9.10. Htc pc board (230v) a b c d 1 2 3 4 2 1 3 4 drawing name model htc pc board (230v) (1/1) tp82224-31 cn760 1 tp82224-31 cn761 1 ces615an1 f101 250.0v 0.47uf c101 tf3524v102y l102 2 4 1 3 rs1abc11 sw101 1 2 4 3 250.0v 0.1uf c102 tc-14-151 l101...

  • Page 460

    460 dp-1510p/1810p /1810f/2010e apr 2002 edition 2.0 9.11. Wts pc board a b c d 1 2 3 4 2 1 3 4 drawing name model wts pc board (1/1) cnz1120 pc1 4 2 1 3 rpi-574n pc2 e k a c cn740 1 cn740 2 cn740 3 cn740 4 cn740 5 cn740 6 jw1 jw2 tl1 tl2 gnd nopbt nbpsen nbtfsen bpled tfled dp-1510p/1810p /1810f/20...

  • Page 461

    461 dp-1510p/1810p /1810f/2010e apr 2002 edition 2.0 9.12. Lfb pc board a b c d 1 2 3 4 2 1 3 4 drawing name model lfb pc board (1/1) cn181 inv pcb or scanner lamp lfb pcb cn182 1 cn181 2 cn182 1 cn182 2 cn182 3 cn182 4 dp-1510p/1810p /1810f/2010e.

  • Page 462

    462 dp-1510p/1810p /1810f/2010e apr 2002 edition 2.0 9.13. Sns pc board a b c d 1 2 3 4 2 1 3 4 drawing name model sns pc board (1/1) rpi-574n pc1 e k a c rpi-574n pc2 e k a c 180 250mw r1 cn41 1 cn41 2 cn41 3 cn41 4 nb4sn na3sn gnd +5v adf pcb dp-1510p/1810p /1810f/2010e.

  • Page 463

    463 dp-1510p/1810p /1810f/2010e apr 2002 edition 2.0 9.14. Mjr pc board (for dp-1810f only) a b c d 1 2 3 4 2 1 3 4 drawing name model mjr pc board (1/1) dp-1810f fl05rd200a l3 arg1 fl05rd200a l4 fl05rd200a l1 fl05rd200a l2 fg fl05rd200a l11 fl05rd200a l12 lhl08nb272j l8 lhl08nb332j l7 gnd uf1717v28...

  • Page 464

    464 dp-1510p/1810p /1810f/2010e apr 2002 edition 2.0 9.15. Sdrm pc board a b c d 1 2 3 4 2 1 3 4 drawing name model sdram pc board (1/1) hy57v651620altc-10p 60ns ic1 dq0 2 dq1 4 dq2 5 dq3 7 dq4 8 dq5 10 dq6 11 dq7 13 ldqm 15 *we 16 *cas 17 *ras 18 *cs 19 a0 23 a1 24 a2 25 a3 26 a10/ap 22 a12/ba1 21 ...

  • Page 465

    465 dp-1510p/1810p /1810f/2010e apr 2002 edition 2.0 9.16. Lanb pc board a b c d 1 2 3 4 2 1 3 4 drawing name model lan b pc board (1/10) r49 4.7k r4 10k c2 50v 470pf c14 25v 0.1uf txd0 008:d2 tl15 r21 3k r44 68 r22 200 r42 68 gnd r51 4.7k r58 4.7k r8 10k gnd sd[15-0] tl4 r15 10k c6 50v 470pf tl6 r1...

  • Page 466

    466 dp-1510p/1810p /1810f/2010e apr 2002 edition 2.0 a b c d 1 2 3 4 2 1 3 4 drawing name model lan b pc board (2/10) c25 25v 0.1uf ncash 001:d2;007:a1 nras3 007:e4 nras1 007:e4 c21 25v 0.1uf +5v nras2 007:e4 c23 25v 0.1uf c28 25v 0.1uf c27 25v 0.1uf c19 25v 0.1uf ic3 hm5118160clj-7 70ns 31 *lc 34 i...

  • Page 467

    467 dp-1510p/1810p /1810f/2010e apr 2002 edition 2.0 a b c d 1 2 3 4 2 1 3 4 drawing name model lan b pc board (3/10) lh28f160skt-l65 65ns ic39 20 a8 37 vcc 39 dq10 41 dq11 45 dq12 47 dq13 50 dq14 52 dq15 43 vcc 11 a14 32 a0 38 dq2 22 a7 1 nc 12 a13 36 dq9 35 dq1 23 a6 13 a12 3 nc 29 nc 5 a19 34 dq8...

  • Page 468

    468 dp-1510p/1810p /1810f/2010e apr 2002 edition 2.0 a b c d 1 2 3 4 2 1 3 4 drawing name model lan b pc board (4/10) ngcpint 001:a3 tl58 sd[1] 001:b1;002:a1;003:d2;005:c2;009:a3 tl77 tl84 sa[1] 001:d1;002:a5;003:a4;005:c1;009:a2 tl66 tl52 tl81 niowt 006:e5 ic8 tc74hc109af 1 *clr 3 *k 7 *q 6 q 5 *pr...

  • Page 469

    469 dp-1510p/1810p /1810f/2010e apr 2002 edition 2.0 a b c d 1 2 3 4 2 1 3 4 drawing name model lan b pc board (5/10) tl109 sd[5] 001:b1;002:a1;003:d2;004:b2;009:a3 tl108 sd[6] 001:b1;002:a1;003:d2;004:b2;009:a3 tl117 sa[11] 001:d1;002:a5;003:a4;007:a4;009:a2 nflbl 005:b3 tl114 nfiowrl 008:a2 sd[8] ...

  • Page 470

    470 dp-1510p/1810p /1810f/2010e apr 2002 edition 2.0 a b c d 1 2 3 4 2 1 3 4 drawing name model lan b pc board (6/10) r95 10k ic16 tc74vhc04f 6 5 ic20 tc74vhc00f 5 6 4 ic7 tc74vhc32f 10 8 9 ic13 tc74vhc08f 10 8 9 sysclk 001:a4;004:b5;006:c1;007:a2 r102 0 sa[0] 001:d1;002:a5;003:a4;004:b1;009:a2 tl12...

  • Page 471

    471 dp-1510p/1810p /1810f/2010e apr 2002 edition 2.0 a b c d 1 2 3 4 2 1 3 4 drawing name model lan b pc board (7/10) tl131 tl128 ic26 tc74vhc08f 5 6 4 r105 10k ic28 tc74vhc138f 7 *y7 13 *y2 2 b 1 a 3 c 4 *g2a 5 *g2b 12 *y3 11 *y4 15 *y0 10 *y5 6 g1 14 *y1 9 *y6 ic25 tc74vhc74f 8 *q 9 q 12 d 10 *pre...

  • Page 472

    472 dp-1510p/1810p /1810f/2010e apr 2002 edition 2.0 a b c d 1 2 3 4 2 1 3 4 drawing name model lan b pc board (8/10) cn2 22 cn2 55 tl137 cn2 33 fiod[14] 005:d3 ic27 tc74vhc04f 6 5 cn2 52 cn2 43 fiod[6] 005:d2 ic22 tc74vhc02f 12 13 11 tl135 cn2 35 cn2 32 fiod[1] 005:d2 cn2 48 cn2 49 gnd cn2 28 ic27 ...

  • Page 473

    473 dp-1510p/1810p /1810f/2010e apr 2002 edition 2.0 a b c d 1 2 3 4 2 1 3 4 drawing name model lan b pc board (9/10) lan91c110 ic40 xtal1 2 xtal2 3 vdd 133 vdd 111 vdd 96 vdd 87 vdd 79 vdd 66 vdd 55 vdd 43 vdd 33 vdd 20 vdd 4 avdd 144 tx25 6 rx_er 7 rx_dv 8 rx25 10 col100 11 crs100 12 rxd0 13 rxd1 ...

  • Page 474

    474 dp-1510p/1810p /1810f/2010e apr 2002 edition 2.0 a b c d 1 2 3 4 2 1 3 4 drawing name model lan b pc board (10/10) cn6 3 cn6 4 cn6 2 cn6 1 rxd[0-3] 009:d2 txd[0-3] 009:d1 rx_er 009:d2 col100 009:d1 crs100 009:d1 rx_dv 009:d2 rxclk 009:d2 mdio 009:d2 mdc 009:d2 dso751sb(25.000mhz) osc1 3 out 1 co...

  • Page 475

    475 dp-1510p/1810p /1810f/2010e apr 2002 edition 2.0 9.17. Lanc pc board a b c d 1 2 3 4 2 1 3 4 drawing name model lan c pc board (1/1) dp-1510p/1810p /1810f/2010e.

  • Page 476

    476 dp-1510p/1810p /1810f/2010e apr 2002 edition 2.0 9.18. Ep pc board a b c d 1 2 3 4 2 1 3 4 drawing name model ep pc board (1/8) dp-1510p/1810p /1810f/2010e.

  • Page 477

    477 dp-1510p/1810p /1810f/2010e apr 2002 edition 2.0 a b c d 1 2 3 4 2 1 3 4 drawing name model ep pc board (2/8) dp-1510p/1810p /1810f/2010e.

  • Page 478

    478 dp-1510p/1810p /1810f/2010e apr 2002 edition 2.0 a b c d 1 2 3 4 2 1 3 4 drawing name model ep pc board (3/8) dp-1510p/1810p /1810f/2010e.

  • Page 479

    479 dp-1510p/1810p /1810f/2010e apr 2002 edition 2.0 a b c d 1 2 3 4 2 1 3 4 drawing name model ep pc board (4/8) dp-1510p/1810p /1810f/2010e.

  • Page 480

    480 dp-1510p/1810p /1810f/2010e apr 2002 edition 2.0 a b c d 1 2 3 4 2 1 3 4 drawing name model ep pc board (5/8) dp-1510p/1810p /1810f/2010e.

  • Page 481

    481 dp-1510p/1810p /1810f/2010e apr 2002 edition 2.0 a b c d 1 2 3 4 2 1 3 4 drawing name model ep pc board (6/8) dp-1510p/1810p /1810f/2010e.

  • Page 482

    482 dp-1510p/1810p /1810f/2010e apr 2002 edition 2.0 a b c d 1 2 3 4 2 1 3 4 drawing name model ep pc board (7/8) dp-1510p/1810p /1810f/2010e.

  • Page 483

    483 dp-1510p/1810p /1810f/2010e apr 2002 edition 2.0 a b c d 1 2 3 4 2 1 3 4 drawing name model ep pc board (8/8) dp-1510p/1810p /1810f/2010e.

  • Page 484

    484 dp-1510p/1810p /1810f/2010e apr 2002 edition 2.0 9.19. Frm pc board a b c d 1 2 3 4 2 1 3 4 drawing name model frm pc board (1/1) cn1 20 cn1 56 cn1 15 tl48 tl40 tl3 tl6 cn1 48 cn1 23 cn1 18 cn1 46 tl38 cn1 28 tl41 tl35 tl5 cn1 43 tl19 tl47 tl21 cn1 60 cn1 57 cn1 55 tl10 cn1 40 tl43 tl33 cn1 13 g...

  • Page 485

    Memo.

  • Page 486

    Dzzsm00163-1.