1. DL manuals
  2. Panasonic
  3. All in One Printer
  4. DP-3530
  5. Operating Instructions Manual

Panasonic DP-3530 Operating Instructions Manual

Manual is about: Digital Imaging System

Summary of DP-3530

  • Page 1

    Getting t o know y our machine before starting making copies function accessories network scanner (option) problem solving others digital imaging systems operating instructions (for copy & network scan functions) model no. Dp-3530/4530/6030 before operating this equipment, please read these instruct...

  • Page 2: Useful Office Functions

    2 getting to know your machine useful office functions copy • copy up to ledger size. Capable of copying text/photos/ halftone originals. Scan/file • monochrome scanner capability when optional network scanner module (da-ns600) is installed. Scanning resolution up to 600 dpi. • a document can be sav...

  • Page 3

    3 getting t o know y our machine operating instructions outline function getting to know your machine before starting making copies options problem solving others ● precautions (see pages 7-13) ● quick operation chart (see pages 14 and 15) ● adding paper, replacing the toner bottle, removing a misfe...

  • Page 4: Symbols/icons

    4 getting to know your machine the following symbols/icons are used throughout this operating instructions manual. Place original(s) on the adf place original(s) on the platen (book) place original on the platen (sheet) press any hard key on the control panel or touch any button on the touch panel d...

  • Page 5: Table of Contents

    5 getting t o know y our machine getting to know your machine table of contents getting to know your machine useful office functions .................................................................................................................. 2 multi-tasking job table .............................

  • Page 6: Function

    6 getting to know your machine insertion/overlay ........................................................................................................................... 56 ■ cover .............................................................................................................. 56 ■ ...

  • Page 7: Precautions

    7 getting t o know y our machine getting to know your machine precautions ■ laser safety ■ caution label laser safety this unit employs a laser. Only qualified service personnel should attempt to service this device due to possible eye injury. Caution: use of controls, adjustments or performance pro...

  • Page 8: Precautions

    8 getting to know your machine precautions power and ground connection cautions ensure that the plug connection is free of dust. In a damp environment, a contaminated connector can draw a significant amount of current that can generate heat and eventually cause fire over an extended period of time. ...

  • Page 9: Others

    9 getting t o know y our machine never touch a power cord with wet hands. Danger of electric shock exists. If the power cord is broken or insulated wires are exposed, contact your service provider for a replacement. Using a damaged cord can cause fire or electric shocks. Stop operation immediately i...

  • Page 10: Others

    10 getting to know your machine do not place a magnet near the safety switch of the machine. A magnet can activate the machine accidentally, resulting in injuries. Do not use a highly flammable spray or solvent near the machine. It can cause fire. When copying a thick document, do not use excessive ...

  • Page 11: For Your Safety

    11 getting t o know y our machine for your safety ■ the maximum power consumption is 1.45 kw. A properly wired (grounded), dedicated, 15a, 120v ac outlet is required. Do not use an extension cord. The power cord on this machine must be used to disconnect the main power. Please ensure that the machin...

  • Page 12: Ventilation

    12 getting to know your machine ventilation ■ the machine should be installed in a well-ventilated area to minimize the ozone density in the air. Warning for usa this product has a fluorescent lamp that contains a small amount of mercury. It also contains lead in some components. Disposal of these m...

  • Page 13

    13 getting t o know y our machine ■ key operator password ● the initial machine modes can be checked or changed with the function modes, however, these modes require the key operator password. For key operator : when setting up this machine, please consult with the authorized service provider, and d...

  • Page 14: Operation Chart

    14 getting to know your machine operation chart if set in other function mode face up original guides adjust to the original’s width from adf from platen face down ● if the original is not positioned properly, a portion of the original may not be copied. ● for originals smaller than invoice size, po...

  • Page 15

    15 getting t o know y our machine reduction/enlargement only (see page 36) select desired settings number of copies (max. 999) adjust the manual exposure or select type of original(s) mainly text text and photo combined mainly photo copy jobs (see pages 34-41) (see pages 42-47) (see pages 48 and 49)...

  • Page 16: Operation Chart

    16 getting to know your machine hopper 2 1 toner bottle toner hopper face-up paper feed tray 2 1 max level indicator operation chart ■ problem solving ● adding paper (3000-sheet large capacity paper tray (lct) (option)) ● adding paper (1550-sheet paper tray 1) do not touch the tray while it is movin...

  • Page 17

    17 getting t o know y our machine 2 empty toner bottle 1 new toner bottle 10 to 15 times cap overfill indicator paper capacity: 3000 sheets (20 lb) 4 3 4 attention ● for optimum copy quality it is recommended that only panasonic brand toner is used in the copier. Store toner in a cool dark area with...

  • Page 18: Operation Chart

    18 getting to know your machine staple cartridge staple cover stapler cover 2 1 lock lever stapler unit stapler cover operation chart ■ problem solving (common operation) ● 2-bin finisher (da-fs330) ● replacing the staple cartridge (common operation) (when optional finisher is installed.) 1 da-fs330...

  • Page 19

    19 getting t o know y our machine staple cartridge empty new 2 1 tape new empty 2 1 tape empty 2 1 new staple cartridge number of copies (max. 999) 3 4 check the operation 2 4 5 6 7 10 4 5 6 4 5 6 7 close the staple cover. When the staple is jammed ● the following message will be displayed on the to...

  • Page 20: Operation Chart

    20 getting to know your machine stapler unit staple cartridge tape stapler unit 2 1 blue mark finisher front cover operation chart ■ problem solving (continued) ● 1-bin saddle-stitch finisher (da-fs355a) ● removing a misfed paper (locations) 1 2 3 8 9 7 misfed location indicator ● indicates to open ...

  • Page 21

    21 getting t o know y our machine finisher front cover new staple case empty staple case staple cartridge ● user error codes (u code) 4 5 6 7 10 when the staple is jammed ● the following message will be displayed on the touch panel display: "can not complete confirm staple unit" u1 front cover is op...

  • Page 22: Operation Chart

    22 getting to know your machine left cover exit cover magnet heat roller cover exit cover transport release lever misfed paper right cover operation chart ■ problem solving (continued) ● removing a misfed paper (paper entry area) ● removing a misfed paper (paper transport area) 1 2 1 2 ● removing a ...

  • Page 23

    23 getting t o know y our machine left cover caution hot surface magnet heat roller cover fuser knob push and turn paper transport knob 3 4 5 3 3 4 5 6 4 5 8 3 close the right cover..

  • Page 24

    24 getting to know your machine 1 2 paper transport knob misfed paper right lower cover exit guide misfed paper inner cover adf cover automatic duplex unit knob 5 (left) transport release lever ● removing a misfed paper (automatic duplex unit (adu)) 1 2 6 7 ■ problem solving (continued) ● removing a...

  • Page 25

    25 getting t o know y our machine right lower cover adf cover misfed paper exit guide green labelled tab adf tray push and turn knob 5 (right) knob 5 (centre) automatic duplex unit 3 4 5 6 8 9 3 4 5 6 8 9 3 4 5.

  • Page 26

    26 getting to know your machine infeed cover misfed paper infeed cover lower front cover finisher push release button transport cover misfed paper finisher upper cover finisher push release button misfed paper misfed paper door latch misfed paper ● removing a misfed paper (large capacity paper tray)...

  • Page 27

    27 getting t o know y our machine saddle exit cover misfed paper push and turn finisher upper cover misfed paper punch cover punch cover latch door 3 4 3 4 5 6 8 9 3 4 5 6 8.

  • Page 28

    28 getting to know your machine misfed paper inner cover lower knob finisher front cover finisher misfed paper stapler cover knob b misfed paper upper cover ● removing a misfed paper (2-bin finisher) (option) 1 2 6 7 ■ problem solving (continued) when the optional 2-bin finisher (da-fs330) is instal...

  • Page 29

    29 getting t o know y our machine finisher finisher finisher front cover stitch tray finisher upper cover upper cover trash box finisher guide misfed paper knob a 3 4 5 6 8 9 when paper cannot be removed: 3 4 5 3 4 5 6 8 finisher entry guide.

  • Page 30: Before Starting

    30 before starting as an e nergy s tar ® partner, panasonic has determined that this product meets the e nergy s tar ® guidelines for energy efficiency. This voluntary program specifies certain energy consumption and usage standards. This product will automatically “power down” after a specified per...

  • Page 31: Control Panel

    31 before starting dp-6030 10 8 9 1 2 3 4 5 6 7 contents copy key ● to use the unit as a photocopier. Energy saver key ● saves power while the copier is not in use. Interrupt key ● interrupts other copy or print jobs while making copies. Function key ● use when changing the paper size, initial funct...

  • Page 32: Before Starting

    32 before starting touch panel display dp-6030 1 2 3 4 5 9 10 20 22 21 12 15 16 18 19 26 25 24 23 27 13 14 11 8 6 7 17 note ● use only gentle finger pressure to activate the touch panel display. Do not use sharp objects such as pens, fingernails etc., as this may damage the panel. ● touch panel disp...

  • Page 33

    33 before starting contents see page warning indications 14 - 17 : add toner : add paper : call service (call your service provider) : waste toner original icon — original size indication — multi-size feeding / job build and sadf mode indication 46 and 47 rotate mode indication — number of copies / ...

  • Page 34: Making Copies

    34 making copies basic menu ■ copying the same size originals (1:1) copy size is automatically selected. 100% if set in other function mode or if original size is not detected note ● during the copy operation and after making copies, the fan motor may start spinning. This is a normal operation and i...

  • Page 35

    35 making copies adjust the manual exposure or select type of original(s) mainly text text and photo combined mainly photo number of copies (max. 999) note ● memory capacity: if memory overflows during original scanning, the message “cannot complete / job exceeds memory capacity” will be displayed o...

  • Page 36: Making Copies

    36 making copies basic menu 100 copies 50 copies 50 copies + 100 copies 2 1 100 ■ copying with preset ratios (reduction/enlargement) letter ledger letter ledger or or if original size is not detected ■ proof copying or allows you to make one proof set, before proceeding to copy a large multi-set wit...

  • Page 37

    37 making copies original copy size size ledger legal letter-r invoice-r ledger 100 77 65 50 legal 121 100 79 61 letter-r 129 100 100 65 invoice-r 200 155 129 100 the correct ratio is automatically selected. Reduction and enlargement ratios (%) number of copies (max. 999) number of copies (max. 999)...

  • Page 38: Making Copies

    38 making copies basic menu ■ tandem/remote copy settings (registration 1) input the key operator id code if required. Input id code (4-digit) enter the key name∗ (up to 15 characters). ∗ by default, the key name will be up to 15 characters of the station’s name. ■ tandem/remote copy settings (regis...

  • Page 39

    39 making copies scroll to 08/10 to input upper case letter(s). To input numbers and/or symbols. To move the cursor (_) to the left or right side. To erase the character before the cursor. Machine name (up to 15 characters) button names on the qwerty keyboard input id code (4-digit) scroll to 05/05 ...

  • Page 40: Making Copies

    40 making copies basic menu ■ job queue refers to a list of jobs waiting to print, delete or change of priority (only for print job). Job 1 job 2 job 3 job 3 job 1 job 2 deleted select the job(s)∗ you wish to delete ∗∗ ∗ you can select to delete multiple/all jobs. ∗∗ priority can be selected for pri...

  • Page 41

    41 making copies input password (4-digit) 2 times select the desired pc address number of copies note ● this completion notice is available only when connected to the network. To reset the completion notice, press the cancel button. 2 3 4 5 6 3 4 5.

  • Page 42: Making Copies

    42 making copies 2-sided/original copy ■ 1-sided 2-sided, 2-sided 1-sided, 2-sided 2-sided copy 1-sided 2-sided copy 2-sided 1-sided copy 2-sided 2-sided copy or reduction/ enlargement only ■ book 2-sided copy book 2-sided copy reduction/ enlargement only (1st page blank) (1st page imaged) platen ex...

  • Page 43

    43 making copies bind position or or or when clearing the 2-sided copy: number of copies from platen: when "last original?" message is displayed. Ex: 2 originals touch "no" button. Place next original on the platen. 3 press start key. 4 touch "yes" button. Number of copies original format copy forma...

  • Page 44: Making Copies

    44 making copies 2-sided/original copy 1 2 3 5 6 4 6 4 5 3 1 2 3 4 1 2 4 3 1 2 ■ 2 page copy copying two facing pages or a ledger size original on two separate letter size sheets. Letter ledger ledger platen example: ledger size original ■ n in 1 copy ● 2 in 1 copy ● 2-sided copy from 4/8/12 1-sided...

  • Page 45

    45 making copies 6 copy format or number of copies ∗ n in 1 mode original direction copy layout or or or ● copy is automatically reduced. 2 in 1: 65 %, 4 in 1: 50 %, 6 in 1: 38 % (ex. Letter to letter- size) number of copies binding position cover mode and paper tray or when "last original?" mes- sa...

  • Page 46: Making Copies

    46 making copies 2-sided/original copy originals copies full size reduction enlargement legal legal letter-r/invoice ledger letter-r letter-r letter-r/invoice ledger ledger ledger letter/letter-r — letter letter letter/letter-r ■ multi-size feeding use this function when copying mixed ledger/letter ...

  • Page 47

    47 making copies number of copies number of copies place the next original within 5 sec. Of last ejected copy. Select sorting/finishing settings or or etc. Place the next original within 5 sec. Of last ejected copy. (30 sheets) if “another original? Yes or no” message is displayed, touch the “no” bu...

  • Page 48: Making Copies

    48 making copies sort/finish 1 1 1 sort staple sort non-sort rotate-sort 1 1 1 rotate-group 3 1 2 shift-sort shift-group 1 1 1 3 1 2 punch p p saddle-stitch ■ when using sort mode multiple copy sets are sorted automatically. Multiple copies of individual pages are stacked in alternate direction (rot...

  • Page 49

    49 making copies or or sort mode or or when the optional finisher (see pages 82 and 83) is installed, this screen will change as follows: for da-fs330 or 1 2 adf platen staple position ex. Top left corner when overflow indicator appears on the display, remove excess copies from the bin. Of of ● over...

  • Page 50: Making Copies

    50 making copies zoom/effects ■ zoom copies with variable zoom ratios from 25 % to 400 % in 1 % increments. 25% 400% or ■ auto zoom the copy zoom ratio adjusts automatically to the selected paper size. Fit to paper length or width fit to paper length and width opening the adf ■ edge creates a blank ...

  • Page 51

    51 making copies or same vertical and horizontal ratio 25% - 400% or or keypad different vertical and horizontal ratio 25% - 400% or or keypad or number of copies number of copies fit to paper length or width fit to paper length and width paper size (paper tray) or same vertical and horizontal void ...

  • Page 52: Making Copies

    52 making copies zoom/effects ■ margin shifts image to right, left, up or down. Or ■ centering copy image can be centered automatically on selected paper. Opening the adf ■ image repeat creates continuous copy image on one sheet. Minimum original size: 20 x 20 mm opening the adf the dotted line can ...

  • Page 53

    53 making copies or number of copies or keypad margin area 5 - 99 mm if a part of the copied image is missing when using the margin mode, change the margin reduction setting to yes. (see page 67) number of copies paper size (paper tray) number of copies paper size (paper tray) number of copies 3 4 3...

  • Page 54: Making Copies

    54 making copies zoom/effects ■ stamping (page numbering) page numbers can be automatically stamped on each page. 1/8 -1- adf only∗ ■ stamping (date stamp) the date can be automatically stamped on each page. Adf only∗ ■ stamping (issue number stamping) an issue number can be automatically stamped on...

  • Page 55

    55 making copies number of copies (max. 999) ● multiple copy sets will be sorted automatically. Orientation stamping position or stamping start page from 1, 2 or 3 number of copies (max. 999) ● multiple copy sets will be sorted automatically. Orientation stamping position changing the stamp date num...

  • Page 56: Making Copies

    56 making copies insertion/overlay ohp2 2 1 + (2) (1) + ohp(2) ohp2 ohp(1) (2) (1) 2 1 + (2) (1) + ohp1 ohp1 ohp2 2 1 + ohp(2) ohp2 ohp(1) (2) (1) 2 1 + ohp1 ohp1 + + inser tion inser tion ■ cover adds cover page(s) to copies. Blank page copied page 2 2 1 1 + 3 2 4 3 + 4 1 2 1 original blank page or...

  • Page 57

    57 making copies paper size∗ paper tray cover page mode cover (front) cover (front+back) blank copy number of copies (max. 999) paper size∗ paper tray page insertion mode blank copy number of copies (max. 999) paper size∗ paper tray ohp interleaving mode blank copy number of copies (max. 999) paper ...

  • Page 58: Making Copies

    58 making copies insertion/overlay ■ overlay overlays a second image onto the first by using a second original. 1st-page ■ file edit up to three∗ editing functions available in the form overlay feature. ∗ : to add a new file∗ (hdd = max. 5 files) ∗ : to erase a registered file ∗ : to change the titl...

  • Page 59

    59 making copies density for 1st page image number of copies (max. 999) or select the overlay image to store into memory for later use. Or density for registered image register or file name erase file name edit enter the file name select a file number of copies (max. 999) from platen: if “another or...

  • Page 60: Making Copies

    60 making copies other features ■ job memory five copy jobs can be stored in memory (m1 to m5) for recall at a later time. To store a job in memory m1, m2, m3, m4, m5 set up the copy job to be stored. 1 2 note: when the m5 key is used, the double exposure mode should be set to "off" in the copier se...

  • Page 61

    61 making copies to recall a job stored in memory m1, m2, m3, m4, m5 or number of copies (max. 999) 1 2 3 note ● when using the double exposure mode, the m5 is turned on and other job requiring memory cannot be used. ● the default setting of double exposure mode is "on" in the copier settings "19 do...

  • Page 62: Making Copies

    62 making copies other features ■ concurrent copying the next copy job can be reserved even if the current copy job is not completed. (requires the optional hard disk drive (see page 81) to be installed) 1st job 1st job 2nd job reserve copy 2nd job 1st job or select function ■ energy saver (power sa...

  • Page 63

    63 making copies scanning is completed or select function job waiting list can be confirmed with job queue. (see page 40) ■ interrupt mode this mode can interrupt other copy jobs while making copies/printing. Or other job set other job is completed number of copies (max. 999) ∗ default m1/m2 size ca...

  • Page 64: Function

    64 function ■ using function modes to change the initial copy modes general settings general settings for key operator copier settings copier settings for key operator printer settings printer settings for key operator fax/email settings fax/email settings for key operator scanner settings input ide...

  • Page 65

    65 function copier settings: changing the initial copy modes ● default function of each copy mode (see page 67) for key operator: paper size priority, original mode, contrast, job build and sadf mode, original size of manual skyshot mode, etc. (see pages 73 and 74) printer settings: changing the ini...

  • Page 66: Function

    66 function ■ general settings screen no. 00 power on default mode selects mode. Copy ● copy, printer, scanner∗, fax∗ 01 manual add toner adds toner manually. Off ● off, on 02 sort memory status indicates the sorting memory status. Off ● off, on 03 departmental counter indicates the department count...

  • Page 67

    67 function ■ copier settings screen no. 00 margin value default selects the margin shift value. 10 mm ● 5 mm, 10 mm, 15 mm, 20 mm 01 edge value default selects the edge width. 5 mm ● 5 mm, 10 mm, 15 mm, 20 mm 02 book value default selects the book void width. 20 mm ● 15 mm, 20 mm, 25 mm, 30 mm 03 m...

  • Page 68: Function

    68 function ■ scanner settings screen no. 00 original mode default sets the original setting. T/p ● text, t/p (text/photo), photo 01 compression mode def. Sets the default compression mode setting. Jbig ● mh, mr, mmr, jbig 02 resolution default sets the default resolution setting. 600dpi ● 150dpi, 3...

  • Page 69

    69 function ■ printer settings screen no. 00 number of prints sets the initial number of prints. 1 ● 1 ~ 999 01 paper size sets the paper size setting. Letter ● a3, b4, a4, b5, a5, ledger, legal, letter, invoice, 8 x 13, 8.5 x 13 02 paper tray sets the paper tray setting. Auto ● auto, bypass, tray 1...

  • Page 70: Function

    70 function for key operator ■ general settings screen no. 00 paper size sets the paper size of each paper drawer.∗ consult with an ● ledger, legal, letter, letter-r, invoice, a3, authorized service b4, a4, a4-r, b5, b5-r, a5, 8 x 13, 8.5 x 13, dealer fls2, auto∗∗ 01 auto reset time selects the cont...

  • Page 71

    71 function ■ general settings screen no. 15 fold position (a3/ldr) ● -4.0 - +4.0 mm 0.0 mm 16 fold position (b4) ● -4.0 - +4.0 mm 0.0 mm 17 fold position (a4/ltr-r) ● -4.0 - +4.0 mm 0.0 mm 19 language sel. Priority selects the display message language. Off ● off, on 20 date time setting sets date t...

  • Page 72: Function

    72 function for key operator ■ general settings screen no. 30 sleep/shutdown select selects the sleep/shutdown mode. Sleep ● sleep, shutdown 31 print general settings sets the print of general function. ● stop, start 32 corona wire cleaning sets the corona wire cleaning. ● off, on 33 mac address ind...

  • Page 73

    73 function ■ copier settings screen no. 00 paper size priority selects paper size priority letter ● ledger, legal, letter, letter-r, invoice, a3, b4, a4, a4-r, b5, b5-r, a5, 8 x 13, 8.5 x 13 01 original mode default selects original setting t/p ● text, t/p (text/photo), photo 02 text contrast selec...

  • Page 74: Function

    74 function for key operator ■ copier settings screen no. 06 interleaving default selects ohp interleaving paper blank ● blank, copy 07 page insertion default selects page insertion blank ● blank, copy 08 cover mode default selects cover paper f, blank ● f, blank, f, copy fb, blank, fb, copy (f: fro...

  • Page 75

    75 function ■ printer settings screen no. 00 job completion time sets the job completion time setting. 180 ● 1~ 999 sec. 01 page protection compress automatically then printout. Off ● off, on 02 error page print sets the error page printout. Off ● off, on 03 spool function sets the spool function. O...

  • Page 76: Function

    76 function examples ■ changing the auto contrast setting you can select whether to automatically adjust the copying density for text and photo originals. Scroll to 02/05 ■ changing the paper size the paper trays are designed to accommodate invoice, letter, letter-r, legal and ledger size paper. Pap...

  • Page 77

    77 function or id code (4-digit) a b inv ltr lt r lgl ldr pull out the paper tray adjust the paper guides ( a / b ) change the paper size indicator for tray 2: change the position of the paper size indicator to display and to automatically select the paper size loaded in the tray. Id code (4-digit) ...

  • Page 78: Function

    78 function ■ department counter the department counter feature can limit the number of copies, administer counters and identification code numbers for each department. (maximum number of departments: 300) contact your authorized service provider to enable the department counter feature. Displays th...

  • Page 79

    79 function id code (4-digit) scroll to 03/10 for maximum prints select page select department maximum number of copies (8-digit) id code (4-digit) turn the power switch on the left side of the machine off and on. For department counter select page select department clear the counter (8-digit) to “0...

  • Page 80: Function

    80 function combined function table next selections 2-sided/orig. Copy sort/ finish zoom/ effects insertion/ overlay others 1 1 1 2 2 1 2 2 book 2 2 page n in 1 booklet multi-size feeding job build and sadf sort shift-sort rotate-sort staple-sort shift-group rotate-group non-sort punch zoom auto zoo...

  • Page 81: Accessories

    81 accessories accessories components ■ the dp-3530/4530/6030 is a digital photocopier which can produce images with great clarity. Furthermore, its copying functionality can also be greatly enhanced by the addition of the following options and supplies. We hope you find that the wide ranging capabi...

  • Page 82: Accessories

    82 accessories finisher bin finisher 1. Components da-fs600/fs605 punch unit (option: da-sp31) for punching 3 holes on copies. Da-fs355a 1 bin 2 bin saddle stitcher tray (da-fs605) when using the booklet copy mode (see page 44). Punch unit (option: da-sp41) for punching 3 holes on copies. Saddle sti...

  • Page 83: 2. Operation

    83 accessories trash box da-fs330 1 bin 2 bin letter size only electronic shift stapling 2. Operation (see page 48) 3. Replacing the staple cartridge (see pages 18-21) 4. Bin capacity (see pages 92 and 93) 4 5 3 4 5 3 4 5 3 punch unit front cover return the finisher to original position. Dispose the...

  • Page 84: Network Scanner (Option)

    84 network scanner (option) ■ document scanning when the panasonic document management system (pdms) is installed and configured on your pc, document(s) can be scanned from the dp-3530/4530/6030 to pc. When using the network scanner, it is necessary first to make the panasonic communication utility ...

  • Page 85

    85 network scanner (option) select a destination (pc)∗ ∗ a destination will be indicated “routing menu” : refer to optional document distribution system (da-wr10). Note: if the panasonic communication utility software is not started on your pc, a destination is not shown on the touch panel display. ...

  • Page 86: Problem Solving

    86 problem solving troubleshooting check action unit does not operate check if the power switches (main power switch on the back and power switch on the left side of the machine) are turned on and if the power cord is plugged into the ac outlet. Does the display light? Press energy saver key on the ...

  • Page 87

    87 problem solving check action marked copies clean the platen glass or sheet. (see below) is the copier platen glass or platen sheet dirty? Cover the original with a sheet of white paper before copying or lighten the exposure setting. Is the original an ohp film or a dark original? ■ if the measure...

  • Page 88: Problem Solving

    88 problem solving replacing the battery/set the date and time the copier has an internal battery (product no.: cr2032) which maintains the date and time. In the event the battery requires replacement, the following message will be displayed. Data led turn the power switch on the left side of the ma...

  • Page 89

    89 problem solving 1 2 data led turn the power switch on the left side of the machine to the on position and close the front cover. Id code (department code) time month, day, year, time month/day/year/time caution denotes hazards that could result in minor injury or damage to the machine. ● this pro...

  • Page 90: Others

    90 others type semi console platen type fixed acceptable originals sheets, books (max. Ledger) copying method laser electrophotography fixing method heat roller fixing imaging method dry-type two components imaging resolution maximum: 600 dpi operation panel touch panel display maximum copy size led...

  • Page 91

    91 others tray capacity maximum 70 sheets (20 lb: 75 g/m 2 ) paper size invoice/letter/legal/ledger paper weight 14 – 28 lb (50 - 105 g/m 2 )/1-sided 17 – 28 lb (64 - 105 g/m 2 )/2-sided electrical requirements supplied from copier dimensions (w × d × h) 23.6 × 23.0 × 5.9 in (600 × 583 × 151 mm) wei...

  • Page 92: Others

    92 others specifications mode 1 bin and 2 bin non-sort/sort/staple paper size 1 bin and 2 bin invoice/letter/letter-r/legal/ledger paper weight 16 - 35 lb (60 - 135 g/m 2 ): non-sort mode paper capacity 1 bin and 2 bin maximum: 1000 sheets / 30 set (stapling mode) staple paper size letter/letter-r/l...

  • Page 93

    93 others mode 1 bin non-sort/sort 2 bin non-sort/shift-sort (letter portrait only)/staple (letter portrait only) paper size 1 bin invoice/letter/letter-r/legal/ledger 2 bin letter paper weight 16 - 35 lb (60 - 135 g/m 2 ): non-sort mode paper capacity 1 bin 100 sheets 2 bin maximum: 1000 sheets / 3...

  • Page 94: Others

    94 others options and supplies part name part no. Remarks deluxe stand da-d351 for usa/canada only deluxe stand (short) da-d352 for usa/canada only system console 1 da-ds603 550 sheet paper tray × 1 system console 2 da-ds604 550 sheet paper tray × 2 3000-sheet tray (lct) da-ma301 3000 sheet paper tr...

  • Page 95

    95 others part name part no. Remarks staple cartridge fq-ss66 staple cartridge refills (3) for da-fs600/605 staple cartridge fq-ss50 staple cartridge refills (3) for da-fs605 (saddle-stitch) staple cartridge dq-ss35 staple cartridge refills (3) for da-fs355a staple cartridge fq-ss32 staple cartridge...

  • Page 96: Others

    96 others index 1 2 1 ..................................................................... 42 2 1 1 ..................................................................... 42 2 2 1 ..................................................................... 42 2page ............................................

  • Page 97

    97 others m making copies with opening the adf ....................... 62 margin ......................................................................... 52 marked copies ............................................................ 87 maximum prints ....................................................

  • Page 98: Others

    98 others z zoom ......................................................................... 50 zoom/effects .................................................... 15, 50-55.

  • Page 99

    99 others important information when requesting information, supplies or service always refer to the model and serial number of your machine. The model and serial number plate (main name plate) is located on the rear side of machine. For your convenience, space is provided below to record informatio...

  • Page 100

    Usa only warranty panasonic digital document company makes no warranties, guarantees or representations, expressed or implied, to customer with respect to this panasonic machine, including but not limited to, any implied warranty of merchantability or fitness for a particular purpose. Panasonic digi...