1. DL manuals
  2. Panasonic
  3. Telephone
  4. KX-TG1061
  5. Quick Manual

Panasonic KX-TG1061 Quick Manual

Manual is about: Panasonic Expandable Digital Corded/Cordless Answering System Operating Instructions

Summary of KX-TG1061

  • Page 1

    Pnqw1623za dc1208sy0 setting up base unit l use only the supplied panasonic ac adaptor pqlv219. Charge for about 7 hours handset charger (120 v ac, 60 hz) l use only the supplied panasonic ac adaptor pqlv219. Rechargeable ni-mh only l use only ni-mh batteries aaa (r03) size. L do not use alkaline/ma...

  • Page 2

    – 2 – operating tips navigator key/volume key (vol., ? ) n scrolling through lists or items by pressing this key ({^} or {v}) repeatedly, you can scroll through (up or down) various lists or items. N adjusting the volume by pressing this key ({^} or {v}) repeatedly, you can adjust the receiver or sp...

  • Page 3

    – 3 – basic operations making/answering calls (base unit/handset) making calls base unit: dial the phone number. I lift the corded handset, or press {sp-phone}. Handset: dial the phone number. I {c}/{s} answering calls base unit: lift the corded handset, or press {sp-phone}. Handset: {c}/{s} to hang...

  • Page 4

    – 4 – frequently asked questions question cause/solution why is w flashing? L the handset is too far from the base unit. Move closer. L the base unit’s ac adaptor is not properly connected. Reconnect ac adaptor to the base unit. L you are using the base unit or handset in an area with high electrica...

  • Page 5

    – 5 – quick troubleshooting “no link. Reconnect base ac adaptor.” remove the batteries for 10 seconds from the handset, and then insert the batteries into the handset again. Your telephone may need service. Please visit http://www.Panasonic.Com/help for further troubleshooting. Try to re-register th...

  • Page 6

    – 6 – quick troubleshooting lift up the handset from the charger. Press {c} at the handset, then check if the display shows “talk”. Check if the telephone cord is properly connected to both the base unit and telephone line jack on the wall. Try to connect your telephone into a different line. Press ...

  • Page 7

    – 7 – registering a handset to the base unit the supplied handset and base unit are pre-registered. If for some reason the handset is not registered to the base unit, re-register the handset. { menu} i {#}{1}{3}{0} press and hold {locator} for about 5 seconds until the registration tone sounds. L th...

  • Page 8: Important!

    – 8 – important! If your product is not working properly ... 1 reconnect ac adaptor to the base unit. 4 read faq in this quick guide and troubleshooting page in the operating instructions. 2 check if telephone line cord is connected. 3 use rechargeable ni-mh batteries. (alkaline/manganese/ni-cd batt...