Panasonic KX-TG1061 Quick Manual - page 6
– 6 –
Quick troubleshooting
Lift up the handset from the charger.
Press {C} at the handset, then check if the display
shows “Talk”.
Check if the telephone
cord is properly connected
to both the base unit and
telephone line jack on the
wall.
Try to connect your
telephone into a different
line.
Press {s}, then check if
the dial tone is heard from
the speaker on the back.
No dial tone
Dial tone is heard.
2 No dial tone is heard from handset.
Try remedy for 1 on
previous page.
See if “Check tel line” is shown on the handset display.
Your telephone may
need service when
only back speaker
provides a dial tone.
Your telephone may need service.
Please visit http://www.panasonic.com/help for further troubleshooting.
“No link. Re-
connect base
AC adaptor.
”
is displayed.
“Talk” is displayed.
Displayed
Not displayed
Still displayed
Still displayed
{C}
{s}
No link. Re-
connect base
AC adaptor.
Talk
Talk
TG106x_QG(e).fm Page 6 Friday, December 19, 2008 2:55 PM