Panasonic KX-TG454SK Operating Instructions Manual - Making Cellular Calls
Making cellular calls
Available for:
KX-TGE270 series (page 3)
1
Press MCELL 1N or MCELL 2N.
2
Dial the phone number.
3
When the other party answers, speak into
the microphone.
4
When you finish talking, press MZN.
Note:
R For best performance, use the
speakerphone in a quiet environment.
R While on a call, you can switch from the
base unit to the handset:
– With the call sharing mode on
(page 43), press MCELLN
*1
on the
handset. a MbN: Select the desired
cellular phone. a MSELECTN a Press
MZN on the base unit.
– If the handset is on the base unit, simply
lift it.
*1 The call is taken when:
– only 1 cellular phone is paired.
– a specific line is set to make cellular
calls (page 21).
Adjusting the speaker volume
Press MjN or MkN repeatedly while talking.
Redialing the last number dialed
1
Press MCELL 1N or MCELL 2N.
2
MREDIALN
Making landline calls
1
MZN
2
Dial the phone number.
3
When the other party answers, speak into
the microphone.
4
When you finish talking, press MZN.
Note:
R While on a call, you can switch from the
base unit to the handset:
– Press M
N on the handset, then press
MZN on the base unit with the call
sharing mode on (page 43).
– If the handset is on the base unit, simply
lift it.
Redialing the last number dialed
MZN a MREDIALN
Pause (for PBX/long distance service
users)
A pause is sometimes required when making
calls using a PBX or long distance service.
When storing a calling card access number
and/or PIN in the phonebook, a pause is also
needed (page 35).
Example: If you need to dial the line access
number “9” when making outside calls with a
PBX:
1
MZN
2
9 a MPAUSEN
3
Dial the phone number.
Note:
R A 3.5 second pause is inserted each time
MPAUSEN is pressed.
Answering calls
When a landline call is being received, the
SP-PHONE indicator flashes rapidly.
When a cellular call is being received, the
CELL indicator and SP-PHONE indicator flash
rapidly.
1
Press MZN when the unit rings.
R You can also answer the cellular call
by pressing MCELL 1N or MCELL 2N.
2
Speak into the microphone.
3
When you finish talking, press MZN.
28
For assistance, please visit http://www.panasonic.com/help
Making/Answering Calls Using the Base Unit
TGE26x_27x(en)_1216_ver041.pdf 28
TGE26x_27x(en)_1216_ver041.pdf 28
2013/12/16 19:32:28
2013/12/16 19:32:28