Panasonic KX-TG7621 series Quick Manual - page 10
– 10 –
Frequently asked questions
Question
Cause/solution
Why is _ displayed?
L
The handset is too far from the base unit. Move closer.
L
The base unit’s AC adaptor is not properly connected.
Reconnect AC adaptor to the base unit.
L
The handset is not registered to the base unit. Register it.
1
Handset: {MENU} (13)
2
Base unit: Press and hold {LOCATOR} for about 5
seconds until the registration tone sounds.
3
Handset: Press {OK}, then wait until a long beep
sounds.
Why can I not register a
cellular phone to the
base unit?
L
Depending on the compatibility of the cellular phone, you may
not be able to register it to the base unit. For more information,
please visit http://www.panasonic.com/link2cell
L
Confirm that the Bluetooth feature of your cellular phone
is turned on. You may need to turn this feature on
depending on your cellular phone.
Why can I not hear a
dial tone? (cellular line)
L
Make sure that the CELL 1 or CELL 2 indicator lights
green and the cellular phone is connected to the base unit.
L
The cellular phone has not been registered to the base
unit. Register the cellular phone.
How can I increase the
handset volume level?
L
Press the navigator key {^} repeatedly while talking.
Why is the
conversation noisy or
cutting off?
L
Try to relocate the base unit so that distance to the
handset is minimized.
L
If the same problem occurs even if the handset is next to
the base unit, call Panasonic customer support at
1-800-211-PANA (1-800-211-7262).
Can I add another
accessory handset to
my base unit?
L
Yes, you can add up to 6 handsets (including the
handset(s) sold with your base unit) to a single base unit.
L
To purchase additional accessory handset(s)
(KX-TGA410/KX-TGA660), please visit
http://www.panasonic.com
or call 1-800-332-5368. TTY users (hearing or speech
impaired users) can call 1-866-605-1277.
Can I keep the batteries
charging all the time?
L
You can leave the handset on the base unit or charger
anytime. This will not harm the batteries.
How can I answer a call
waiting call (2nd call)?
L
Press {CALL WAIT} when you hear the call waiting tone.
For further registration information, visit
http://www.panasonic.com/RegisterYourHandset
TG76xx_(e)_QG.fm Page 10 Tuesday, December 14, 2010 8:38 PM