Panasonic KX-TG9391 Operating instructions manual - page 10
Temporary Confidential
10
Battery charge
Place the handset on the charger for 7
hours before initial use.
L While charging, “Charging” is
displayed and the charge indicator on
the handset lights up. When the
batteries are fully charged, “Charge
completed
” is displayed.
Note:
L It is normal for the handset to feel
warm during charging.
L If you want to use the handset
immediately, charge the batteries for
at least 15 minutes.
L Clean the charge contacts of the
handset, and charger with a soft and
dry cloth once a month. Clean more
often if the unit is subject to the
exposure of grease, dust, or high
humidity.
Making calls
Using the base unit
1
Dial the phone number.
L To correct a digit, press {CLEAR}.
o
2
Lift the corded handset.
L An available line is automatically
selected and the line 1 or line 2
indicator lights. Also the line
number is displayed. To change
the line selection mode, see page
xx.
L You can also select the line
manually by pressing
{LINE 1} or
{LINE 2}.
3
When you finish talking, place the
corded handset on the cradle.
Note:
L You can also dial the phone number
after lifting the base unit’s handset.
L To switch to the cordless handset,
press
{LINE 1} or {LINE 2} on the
handset, then place the corded
handset on the cradle.
Speakerphone
1
During a conversation, press
{SP-
PHONE
} to turn on the
speakerphone.
L Speak alternately with the other
party.
2
When you finish talking, press
{SP-
PHONE
}.
Note:
L Use the speakerphone in a quiet
environment.
L To switch back to the receiver, lift the
corded handset.
Using the handset
1
Lift the handset and dial the phone
number.
L To correct a digit, press
{CLEAR}.
2
{s}
L An available line is automatically
selected and the line number is
displayed. To change the line
selection mode, see page xx.
TG9391_Shinsei.book Page 10 Thursday, April 10, 2008 5:33 PM