Panasonic KX-TG9391 Operating instructions manual - page 11
Temporary Confidential
11
L You can also select the line
manually by pressing
{LINE 1} or
{LINE 2}.
3
When you finish talking, press
{OFF} or place the handset on the
charger.
Note:
L The line 1 or line 2 indicator on the
base unit lights while using the
handset.
Speakerphone
1
During a conversation, press
{s} to
turn on the speakerphone.
L Speak alternately with the other
party.
2
When you finish talking, press
{OFF}.
Note:
L For best performance, use the
speakerphone in a quiet environment.
L To switch back to the receiver, press
{C}.
Answering calls
Using the base unit
When a call is being received, the line 1
or line 2 indicator on the base unit
flashes rapidly.
1
Lift the corded handset or press
{SP-PHONE} when the unit rings.
2
When you finish talking, place the
corded handset on the cradle. If the
speakerphone is used, press
{SP-
PHONE
}.
Using the handset
When a call is being received, the ringer
indicator flashes rapidly.
1
Lift the handset and press
{C} or
{s} when the unit rings.
L The called line is automatically
selected. To change the line
selection mode, see page xx.
L You can also answer the call by
pressing
{LINE 1} or {LINE 2}.
L You can also answer the call by
pressing any dial key from
{0} to
{9}, {*}, or {#}. (Any key
answer feature)
2
When you finish talking, press
{OFF} or place the handset on the
charger.
Using Caller ID service
Important:
L This unit is Caller ID compatible. To
use Caller ID features, you must
subscribe to Caller ID service. Contact
your service provider/telephone
company for details.
Caller ID features
When an outside call is being received,
the name and phone number are
displayed.
Caller information for the last 50 callers
is logged in the caller list by the most
recent call to the oldest.
Answering system
Turning the answering system
on
Press
{LINE SELECT} repeatedly to
select the desired line(s).
i
{ANSWER ON}
L The ANSWER ON indicator lights up.
TG9391_Shinsei.book Page 11 Thursday, April 10, 2008 5:33 PM