Plus M-12S User Manual - page 12
E-12
3 Print button
Moves a one-screen portion of sheet and reads it, then
prints the number of copies displayed in the display
window.
4
+ / − buttons (Number of copies)
Pressing the + button or the − button sets the number of
copies to be printed (to a maximum of 20 sheets). The
number of copies appears in the display window.
5 Save button (USB memory storage)
Moves a one-screen portion of sheet and reads it, then
stores the data on a USB memory.
6 Memory
port (USB port Type A)
Saves in commercially-available USB memory images
that have been read by the copyboard.
7 Reprint button
Prints the previously printed sheet surface one more time.
(The sheet does not move.)
The number of copies can be changed, but the density
and the color/monochrome selection cannot be changed.
8 Density button
Selects the copying density, either “standard” or “dark”.
This function will be effective at time of printing, USB
memory storage, and personal computer storage.
Density mode lamp
The density mode indicator lights green when “dark” is
selected.
9 Color
button
Selects whether to print (or store in memory) in “color” or
“black & white”.
Color mode lamp
The color mode indicator lights green when “color” is
selected.
*When a black & white printer is connected, the printout
will be in black & white even when “Color” is selected.
10 Feed/Stop button
Scrolls the sheet one screen portion left, then stops auto-
matically. A press of this button while scrolling will stop
the scrolling.
1 ON/Standby button
Turns the copyboard’s power on and off (standby mode).
The function settings can be made by pressing the
Density
and ON/Standby
buttons simultaneously.
For details, see page E-29.
Control Panel (models M-12S and M-12W)
When pressing a button, please press the center area (i.e., the round and protruding portion). The button may
not work if it is pressed on a corner.
Names of the Parts
2 Display
window
This 7-segment LED displays the number of copies to be
printed, the USB memory storage operating condition,
and error information. Please see Page E-33 for details
about error information.
If the Erase Reminder function has been set, the sheet
moves to the surface that has not yet been erased
before the power turns off *1.
*1 Depending on the usage method, the Erase
Reminder function may not operate properly.
Note