PLX Luxor User Manual - General Operation
PLX
devices inc.
www.plxdevices.com
6
3
General Operation
Button Function
Light Modes
• Turn On/Off :
• Change Light Mode:
• Decrease or Increase Intensity:
• Adjust Focus (DFS Mode Only):
• Change Screen:
• Lock/Unlock Buttons:
• Full Intensity Shortcut:
Luxor has three light modes: Digital Focus (DFS), Beam+Flood+Lantern (BFL), and Beam+Flood (BF).
Digital Focus Mode (DFS)
DFS mode allows you to control the beam pattern of your Luxor easily with one hand. While in DFS mode, hold
the Mode button down and press the Increase button to narrow the beam pattern or press the Decrease button
to widen the beam pattern. Once the desired beam pattern has been selected, the intensity may be adjusted by
pressing the Increase or Decrease button.
Beam+Flood+Lantern (BFL)
In BFL mode, all seven LEDs are on, allowing you to get a maximum light output of 710 lumens. Adjust intensity
by pressing the Increase or Decrease button.
Beam+Flood (BF)
With all four front facing LEDs on, BF mode is the most effi cient way to light up what lies ahead. Adjust intensity
by pressing the Increase or Decrease button.
Press & Release Power Button
Press & Release Mode Button
Press [] Button
Hold Mode & Press [] Button (DFS Mode Only)
Hold Mode & Press Power Button
Press & Hold Mode and Power Buttons simultaneously for 3 seconds
Double Tap [>] Button