PNI B3000 Manual - Safety:
INTRODUCTION:
The Baby monitor has been designed to help you look after your baby and is not
Intended as a tool for substituting the adults’ supervision & care in any circumstances.
The Baby Monitor is a portable monitoring system with the following features:
- 2.4Ghz Wireless Digital Audio baby Monitor
- Transmission range: 300m (in open area)
- Two-way communication
- Low Interference with high privacy
- High sensitivity microphone
- VOX function
- Volume adjustment
- Out of range LEDs with sound alert
- Low battery LED alert
- Three LEDs on parent unit indicate the noise level in baby room
- With Silicone cover on the LEDs to make the light diffuse comfortabily and softly
- USB adaptor operated for both units
- Battery operated for both units
Transmitter: AAA normal battery
Receiver: AAA normal battery
- Belt clip for the receiver
- Night Light on the Baby unit and the night light can be turned on / off by baby or parent unit
Safety:
For your safety, please use the provided power adaptors. (The manufacturer will not be
responsible to any loss incurred by not using the manufacturer’s provided power
adaptors).
To reduce the risk of fire or electric shock, do not expose this baby monitor to rain or
moisture.
Connect the baby monitor to an easily accessible AC outlet. Should you notice an
abnormality in the device, disconnect the main plug from the AC outlet immediately.
DON’T disassemble the casing in order to avoid the risk of the electric shock.
Refer servicing to qualified personnel only.
DON’T use the damaged power adaptors.
DON’T interfere the plug of power adaptors with conductors, e.g. with rings.
Warning:
Battery may explode if mistreated.
Do not recharge, disassemble or dispose of in fire.
-3-