PNI B3000 Manual - page 7
Operation:
Connect both the parent unit and the baby unit to the provided power adaptors
or battery. Switch power key upward. The power LED will be on in green color。
· Wait for around 2 seconds. The baby unit and the parent unit will pair
automatically. Once the pairing is successful, the volume LED indicators
will flash. Put the baby unit in the baby room and keep it from the baby
at 2m distance. Parents can hear the baby voice with the receiver .If the
parent unit volume is too small,adjust the volume. The volume LEDs indicate
the sound level of the baby.
· In extreme case, eg.serious interference or very poor signal or signal
loss in operation, you can try to change the channel by pressing the pairing
button in the baby unit battery compartment. The baby and parent units
will search an interference-free channel to continue the operation.(Avoid
doing it under good transmission)
-6-
Press the button