PNI B5000 User Manual - Operation:

Operation:

Connect both the parent unit and the baby unit to the provided power 

adaptors or Alkaline battery size AAA (6 pcs required, but not included). 

Switch power keys upward. The power LEDs will be on in green color。

- Put the baby unit in the baby room and keep it from the baby at 2m 

distance. Parents can hear the baby voice with the receiver .If the 

volume of parent unit is too small, adjust the volume. The volume LEDs 

indicate the sound level of the baby.The parent can talk back to the 

Baby unit by pressing Talk key. Then release again to listen to the baby 

voice.

- In extreme case, eg.serious interference or very poor signal or signal 

loss in operation, you can try to change the channel by doing Reset &  

Pairing as specified on the next page. The baby and parent units will 

search an interference-free channel to continue the operation.（Avoid 

doing it under good transmission）

Press the button inside 

the hole by a pin if 

there is interference.

Reset & Pairing:

Under the normal situation, the units are well paired by the 

manufacturer. To do the pairing by users is a really exceptional 

incidence. You have to do that if the parent unit (receiver) loses the 

signal from the baby unit (transmitter).

Procedures：

1.Turn on both units by power adaptors. Press the Reset keys in the 

battery compartments of both baby and parent units simultaneously by 

a pin and hold it（refer to the pic below. Release Reset keys after one 

second. Both units are now reset. After then Pairing process has to be 

carried out immediately.