PNI B5000 User Manual - Some Points to Remember:
2. Press the Pair keys on both units simultaneously. Release the Pair
keys after one second. When seeing the Power LEDs flashing on both
units, this means the pairing is successful. Normal operation resumes. .
Some points to remember:
Battery Power:
For both units, receiver and transmitter:
1. Use exclusively AAA size 1.5V alkaline batteries ( 6 pcs required, but
not included)
2. Unscrew the screw of the battery compartment, take the lid off and
insert the batteries with right polarity.
3. Put the lid back, screw in the screw and check that it is perfectly
closed.
4. Switch the unit on and check that the power LED is on and in green.
Electricity power:
The Baby monitor can operate by batteries as well as by power
adaptors.
1. Insert the power adaptor into AC outlet.
2. If your outlet has a security switch, make sure it is on.
3. Switch the unit on and check that the power LED is on and in green.
Low battery indicator and Out of range alert:
When battery becomes weak, the power LEDs of the units turn into
orange color . It is time to replace for a new battery. So for long hours
use, it is advisable to use power adaptor.
Reset keys