PNI PORTAMATIC 475 Twin Trigger 20 Owner's Manual - page 4
4
SAFETY INSTRUCTIONS
Tool Operati on
The employer is responsible for ensuring that the manufacturer’s
tool operati ng/safety instructi ons are available to operators.
The employer and the tool operator are responsible for the safe use
of the tool.
The employer and tool operator are responsible for selecti ng an
appropriate tool actuati on system from opti ons available, taking into
considerati on the work applicati ons for which the tool is used.
It is the responsibility of the employer and the tool operator to
ensure that the tools are used only when the tool operator and
all other personnel in the work area are wearing eye protecti on
equipment and when required, other appropriate protecti on
equipment such as head, hearing and foot protecti on equipment.
Safety Eye and Face Protecti on Equipment
Safety eye and face protecti on equipment shall conform to the
requirements of ANSI Z87.1 and shall provide protecti on against
fl ying parti cles both from the front and side or shall be determined
by the U.S. Department of Labor’s Occupati onal Safety and Health
Administrati on (OSHA) to provide protecti on equivalent to eye
protecti on conforming to the requirements of ANSI Z87.1 and shall
provide protecti on against fl ying parti cles both from the front and
side.
Head Protecti on Equipment
Head protecti on shall conform to American Nati onal Standards
Insti tute Z89.1, “Protecti ve Headwear for Industrial Workers”.
TOOL MAINTENANCE
When working on air tools note the warnings in this manual and use
extra care when evaluati ng problem tools.
Responsibility for Proper Tool Maintenance
The employer and tool operator are responsible for assuring that the
tool is kept in safe working order as described in the Tool Operati ng/
Safety Instructi ons.
Only qualifi ed personnel shall repair the tool.
The employer is responsible for ensuring that the manufacturer’s
17
475
Part Number
Descripti on
33
47533
PIN, TRIGGER (10033)
34
47534
PIN (10034)
35
47535
ROLLER (10035)
36
47536
O-RING (10036)
37
47537
SCREW, SHCS (10037)
38
47538
PIN (10038)
39
47539
ROLLER (10039)
40
47540
PIN (10040)
41
47541
O-RING (10041)
42
47542
TRIGGER VALVE PLUNGER (10042)
43
47543
SPRING, TRIGGER VALVE (10043)
44
47544
TRIGGER VALVE STEM (10044)
45
47545
O-RING (10045)
46
47546
O-RING (10046)
47
47547
TRIGGER VALVE HOUSING (10047)
47U
47586
TRIGGER VALVE UNIT (10047U)
48
47548
HOLD PLATE (10048)
49
47549
SCREW (10049)
50
47550
SPRING (10050)
51
47551
ARM GUIDE (10051)
52
47552
SPRING (10052)
53
47553
SAFETY ARM B (10053)
54
47554
SCREW, HHCS (10054)
55
47555
FRONT GUIDE (10055)
56
47556
ARM COVER (10056)
57
47557
SAFETY ARM A (10057)
58
47558
INSERT, NOSE (10058)
59
47559
NOSE (10059)
60
47560
PLATE, DRIVER (10060)
61
47561
FOOT (10061)
62
47562
KNOB (10062)
63
47563
MAGAZINE, FIXED (10063)
64
47564
STOP PLATE (10064)
65
47565
SCREW, SHCS (10065)