PRTC Digital TV Manual - page 5
PRTC Digital TV Ser vice
Technical Support (843) 538-5481
www.PRTC.coop
PRTC Digital TV Ser vice
6
7
REAR PANEL CISCO CIS430
The Cisco CIS330 and the Cisco CIS430 have identical rear-panel controls and lights; only the size varies.
1. Network – Ethernet port.
2. USB – not currently supported, reserved for future use.
3. HDMI – Input for high definition TV or home theater receiver with HDMI connections.
4. Y PB PR – components to connect video output to an HDTV.
5. S-Video – Video output for VCR or TV with S-Video connections.
6. Video Out – RCA output to connect to TV, VCR, DVD recorder or other device.
7. Audio Out L and R – Left and Right RCA stereo audio output.
8. Optical – S/PDIF audio output to a digital home theater receiver.
9. To TV (Video Out) – Coax output for TV or VCR.
10. To Wall (Video In) – Coax input for home video network.
11. Power – power adaptor connection.
FRONT PANEL CISCO CIS430
The Cisco CIS330 and the Cisco CIS430 have identical front-panel controls and lights; only the size varies.
1. Power – Powers on and off the Digital Receiver. When held for more than 5 seconds the digital
receiver is restarted. Green light indicates that the power is on.
2. Link LED – Green light indicates data or programming stream is being received.
3. HD LED - Blue light indicates the Digital Receiver is in high definition (HD) mode (720p or 1080i). If
your receiver is connected to your TV via an HDMI cable, the HD LED will stay blue continuously.
4. Record – Red light indicates program recording. *NOTE: This feature is used with Whole Home DVR
service only.
5. Menu – Activates the on-screen menu.
6. Directional Keys – Allows you to change channels and navigate through the guide and menu.
7. OK – Confirms channels or menu options.
8. USB Port – Not supported at this time, reserved for future use.
1
5
2
3
4
6
7
8
8
9
7
6
10
5
11
1
2
3
4