Prusa i3 Hephestos Printing Handbook - page 31
Other manuals for i3 Hephestos:
Settings Manual
of
39
10.5 Calibration issues
10.5.1 Nozzle taps the glass
In case the printbed is at its lowest position set by the Zadjusters and yet nozzle taps the
glass you have to adjust the
Zaxis
endstop holder.
● Move the
Zaxis
endstop holder approximately 0.51 mm upwards. Push a Z rod as
shown in picture below to secure its position.
● Recalibrate
the
printer
.
Pict. 17 How to move up a
Zaxis
endstop holder
31