Prusa i3 Hephestos Printing Handbook - page 4
10.5.2 Different spacing between nozzle and glass after every Zaxis reset
10.5.3 Glass is unstable and doesn’t hold firmly
10.5.4 Default Xaxis position is outside the glass
10.5.5 Uneven spacing of the nozzle on the Xaxis opposite ends
10.6.1 ABS models tear up from the glass when printing
10.6.2 Layers break and split when printing from ABS material
10.6.3 Models move the glass during the print
10.6.4 Models contain either too much or not enough of the filament
10.7 Problems with finished models
10.7.1 Model breaks and/or is easily destructed
11 FAQ common issues when assembling the printer kit
11.1 Nozzle/glass gap is greater in the middle than at the corners
11.2 Printer stops printing soon after start
11.3 Printer can’t read SD card
11.4 Loose X and/or Yaxis belts
11.5 Unattached cables to the heatbed
1 Product details
Title: Original Prusa i3 Plus / Original Prusa i3 Plus (kit)
Version: 1.75 mm
Manufacturer: Prusa Research s.r.o., Prvního Pluku 621/8a, Praha 8, 186 00, Česká
republika
Contacts: phone +420 222 263 718, email:
EEE group: 3 (IT and/or telecommunication equipment)
Device use: indoor only
Power supply: 90135 VAC, 2 A / 180264 VAC, 1 A (5060 Hz)
Working temperature range: 18 °C (PLA)38 °C, indoor use only
Working humidity: 85 % or less
Kit weight (brutto / netto): 9.8 kg / 6.3 kg
Assembled printer weight (brutto / netto): 12 kg / 6.3 kg
Serial number is located on the printer control unit and also on the packaging.
4