PS Audio PowerPlay Programming Manual - page 3
15‐052‐99‐1‐DOM‐A
Page3 of 6
Table 2: Zone Commands
Command
Action
Syntax
(x=zone
number 1‐10)
PowerPlay Response
Zone Power
Turn Specified Zone Off
ZP=x,OFF
&data=OK
Turn Specified Zone On
ZP=x,ON
&data=OK
Reboot Specified Zone
ZP=x,REBOOT
&data=OK
Return Specified Zone Power Status
ZP=x,?
&data=yyy (ON or OFF)
Zone Name
Set specified Zone Name
ZN=x, y (up to
16 chars)
&data=OK
Return Specified Zone Name
ZN=x,?
&data=yyy (Zone Name
Characters)
Zone Delay
Set Specified Zone Delay to Always On
ZD=x,ON
&data=OK
Set Specified Zone Delay to Switched
ZD=x,SW
&data=OK
Set Specified Zone Delay to Delayed
ZD=x,DLY
&data=OK
Set Specified Zone Delay to
Programmed
ZD=x,PGM
&data=OK
Set Specified Zone Delay to Reboot
ZD=x,RBT
&data=OK
Set Specified Zone Delay to Auto‐
Reboot
ZD=x,ARB
&data=OK
Return Specified Zone Delay Status
ZD=x,?
&data=yyy
(ON,SW,DLY, PGM,RBT,
OR ARB)
Set Specified Zone Delay Time
(seconds)
ZT=x,y,z (up to
65536,65536)
&data=OK
Return Specified Zone Delay Time
ZT=x,?
&data=y,z (y= number
of seconds of delay
before switching on. z=
number of seconds
before switching off
Zone Priority
Set Specified Zone Priority Level to Low ZL=x,LOW
&data=OK
Set Specified Zone Priority Level to
Normal
ZL=x,NORMAL
&data=OK
Set Specified Zone Priority Level to
Critical
ZL=x,CRITICAL
&data=OK
Return Specified Zone Priority Level
ZL=x,?
&data=yyy (LOW,
NORMAL, or CRITICAL)