PS Audio PowerPlay Programming Manual - page 6
15‐052‐99‐1‐DOM‐A
Page6 of 6
Output Power
&watts=
Same as the reading on the front panel display
Output Harmonic Distortion
&thd=
Same as the reading on the front panel display
Temperature
&temp=
Same as the reading on the front panel display if
optional temp sensor is installed. Otherwise
’nosensor’
UPS Status
&ups=
notfound, online, battery, critical, or loop
DHCP Server Enable
&dhcps=
0=disabled, 1=enabled
DHCP Enable
&dhcp=
0=disabled, 1=enabled
MAC Address
&mac=
MAC address of unit
IP Address
&ip=
IP address of unit
Subnet Mask
&mask=
Mask address of unit
Gateway Address
&gateway=
Address of Gateway
Primary DNS server
&pdns=
IP Address of Primary DNS server
Secondary DNS server
&sdns=
IP Address of Secondary DNS server
Hostname
&hostname=
Up to 16 alphanumeric characters
Processor Firmware Version
&fwvproc=
Version number of main control software
Bootloader Firmware
Version
&fwvboot=
Version number of bootloader software
Web Firmware Version
&fwvweb=
Version number of Web interface software
Telephone control Firmware
Version
&fwvtel=
Version number of phone control software
Telephone control .wav file
Fimware
&fwvtelwav=
Version number of telephone audio file software
Note3. PowerPlay response to the RI command
Example
&ir1name=TV Power &ir1event=PWRON&ir1wait=1&ir2name=TV Ch
&ir2event=PWRON&ir2wait=1&ir3name=Mute &ir3event=PWRON&ir3wait=1&ir4name=Vol up
&ir4event=PWRON&ir4wait=1&ir5name=Vol dn &ir5event=PWRON&ir5wait=1&ir6name=VCR Power
&ir6event=PWRON&ir6wait=1&ir7name=EMPTY&ir8name=EMPTY&ir9name=EMPTY&ir10name=EMPTY
&ir11name=EMPTY&ir12name=EMPTY&ir13name=EMPTY&ir14name=EMPTY&ir15name=EMPTY&ir16n
ame=EMPTY&freeslots=10