Q Acoustics M2 Manual - page 7
7
IPA
™
– Q Acoustic’s Intelligent Pre-Amplifier removes the need for a remote control through a
signal sensing matrix to enable auto source selection and auto on/off.
MoviEQ
™
– Q Acoustic’s Movie EQ helps to maximise the drama and excitement of a movie or
TV soundtrack. Toggle it on or off for music and movie settings.
NFC – Near Field Connection allows simple connection of Bluetooth
®
devices by tapping the
NFC location on the Q Acoustics speaker.
HDMI ARC – High Definition Multimedia Interface Audio Return Channel removes the need for
additional Optical or Analogue audio cables between source and speaker.
CEC – Consumer Electronics Control syncronises TV remote control of Volume, Mute and
Standby for easy integration of our Q Acoustics speaker.
Bluetooth
®
– An international wireless connection used for streaming audio from all compatible
devices.
aptX
™
– A high definition audio CODEC used for Bluetooth
®
streaming.
AVRCP – A Bluetooth control protocol that synchronises your device control of Volume and
Mute for easy integration of our Q Acoustics speaker.
DAC – Digital to Analogue Converter which determines the bit depth and sample rate of the Q
Acoustics speaker; the higher the number, the better the audio quality.
BMR – Balanced Mode Radiators are Q Acoustics mid/high driver of choice, they have a flat
radiating surface which enables their dispersion to fill a room with sound.
DVC – Dual Voice Coil subwoofers are Q Acoustics subwoofer driver of choice, it has two voice
coils in one driver for greater flexibility of design and improved bass control.
Sub Out – A Phono subwoofer output for connection to an external subwoofer. On some of
our older products the additional sub out provides a huge bottom end when used with a Q
Acoustics subwoofer.
Dynamic Bass – Improved response, loudness, depth and control of bass frequencies is
achieved through our dynamic bass enhancement system, to perfectly integrate our inbuilt
DVC subwoofer.
User EQ – User control of EQ setting for best acoustic performance. This can be changed
dependent upon speaker position, mounting, or user preference.
LSG
™
–Q Acoustic’s Low Source Gain switch increases the incoming signal level to get
maximum performance from your system when connected to low output signal equipment via
HDMI or Optical.
Power Rating – Total continuous power rating of the system in Watts. Eg. BT3 = 2 x 50W =
100W.
Lip Sync – Adjustable delay for lip synchronisation between TV/screen and Q Acoustics
speaker.
3.5mm – 3.5mm jack socket for Analogue input.
RCA – Stereo phono socket for Analogue input.
Feature summary