Q-See CENTRAL MANAGEMENT User Manual - page 10
18
19
Clicking on a camera in the multi-channel view so that it has a red outline and then clicking
on the 1-channel display mode button will cause the
Preview Window to only display that
channel. You can also double click on a screen to bring it to single camera view.
Right-clicking on a channel will bring up a dialog box allowing you to take several actions:
Turn off live view - This allows you to turn off viewing of this channel alone.
Start Manual Record - This records the video of the selected channel to your computer’s
hard drive.
Stop Manual Record - Ends manual recording.
Enable Audio - If you have a microphone or audio-capable camera connected to this
channel, you can turn the audio on. You can also do this in single-camera display
mode by pressing the Enable Audio button below the Preview Window.
Full Screen - This will bring the Preview Window to full screen mode for easier viewing.
The rest of the
Control Center Operation Interface will be hidden. Right-clicking
this screen will return it to normal viewing. If you have more than one display, you will
be given the choice of which monitor on which to display the video.
SNAPSHOT
You can take up to 10 still frames from a
single camera by pressing the Snapshot
button. Click on any channel in the on-screen
Preview Window to chose it. The chosen
camera will have a red outline.
Once you have selected the camera and pressed the Snapshot button, the Snap Picture
window will open.
Channel
Which camera will be used. You can select a camera using the drop down.
Frame
The number of still images (1-10) that will be taken.
Snap
This refreshes the images. Use this if you’ve selected a different camera.
Title
This will display the camera’s name in the upper left of the image.
Time
This will display the time the image was taken.
Exit
Closes the window without taking pictures.
Save To
Shows where the files will be saved.
Browse
Chose a different destination for the files.
Save
Saves the images
Functions
You may print the currently displayed images as you would any other
document. You have the option to preview the printed document, change
your printer settings, and print more than one image to a page.
The images will be saved with the file names shown below each picture. The files are saved
in the bitmap (BMP) format with the file name format showing the DVR’s name, the camera’s
name, the date and the time the image was captured. The first image above would have the
file name: QT4--CAM11.2011.08.30.17.01.14.708.bmp