Q-See EasyView QN6401X User Manual - Table of Contents
4
5
1. BEFORE YOU BEGIN
5
2. INTRODUCTION
7
3. CAMERA SETUP
8
3.1 Placement
8
WiFi 8
Field of View
8
3.2 Connecting the camera
9
Micro SD Memory Card
9
Network Cable
9
4. INSTALLING EVIEW APP
11
4.1 Installing eView for Android
12
4.2 Installing eView for Apple
13
4.3 Registering and Login
14
Creating an eView Account
14
About Passwords
15
Login 15
Adding Cameras
16
4.4 Setting up WiFi
18
5. SET UP USING A COMPUTER 20
5.1 Registration and Software
20
5.2 Adding Cameras
22
5.2 Setting up WiFi
23
6. USING YOUR CAMERA
24
6.1 eView Mobile App
24
6.2 Web Features
29
Questions or Comments? Contact Us
31
Product Warranty
31
TABLE OF CONTENTS
For your safety
To prevent damage to your Q-See product or injury to yourself or to others, read
and understand the following safety precautions in their entirety before installing
or using this equipment.
1. BEFORE YOU BEGIN
Care and caution
n
Care should be taken during transportation, storage and installation of this
camera to avoid rough handling, dropping, or other abuse in order to prevent
damage to the optics or components inside the camera.
n
The camera should be installed in accordance with electrical standards
including keeping the camera and cable away from high voltage, using a surge
protector and using only the rated power supply.
n
Do not use strong or abrasive cleaners on camera body or lens. The camera
should not be immersed in water. Use a damp cloth for cleaning the housing
and a lens cloth for the optics.
n
Do not attempt to disassemble the camera. Only authorized, trained
technicians should service this camera.
n
Your camera is designed for indoor use and should not be placed outdoors.
n
Do not point camera directly at the sun or other strong light source.
FCC Class B Notice
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions:
1. This device may not cause harmful interference.
2. This device must accept any interference received, including interference that
may cause undesired operation.
Note:
This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits
are designed to provide reasonable protection against harmful interference
in a residential installation. This equipment generates, uses and can radiate
radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
WARNING! ELECTRIC
SHOCK RISK!