Q-See QD6523ZH User manual - page 12
22
23
SPECIFICATIONS
Specification
Camera
Image Sensor
1/4” EXviewHAD CCD II
Eective Pixels
NTSC: 976(H) × 494(V) PAL: 976(H) × 582(V)
Horizontal Resolution
Color: 650TVL; B/W: 700TVL
Scanning System
Interlacing
Electronic Shutter Speed
1/1s ~1/100,000s
Min. Illumination
Color: 0.01 Lux/F1.6, B/W: 0.001Lux/F1.6
S/N Ratio
More than 50dB
Video Output
BNC(1.0Vp-p/75), PAL / NTSC
Camera
Features
Day/Night
Auto(ICR) / Color / B/W
Backlight Compensation
BLC / HLC / DWDR (Digital WDR)
White Balance
Auto, ATW, Indoor, Outdoor, Manual
Gain Control
Auto / Manual
Noise Reduction
2D/3D
Privacy Masking
Up to 24 Areas
Digital Zoom
16x
Lens
Focal Length
3.9 mm~89.7mm (23x Optical zoom)
Max Aperture
F1.6~ F3.7
Focus Control
Auto / Manual
Angle of View
61.68° ~ 3.06°
Close Focus Distance
100mm~1000mm
Pan/Tilt Range
Pan: 0° ~ 360° endless; Tilt: 0° ~ 90°, auto ip
180°
Manual Control Speed
Pan: 0.1° ~ 250°/s; Tilt: 0.1° ~150°/s
Preset Speed
Pan: 300°/s; Tilt:200°/s
Preset
80(DH-SD) , 255(Pelco-P/D)
PTZ
PTZ Mode
5 Pattern, 8 Tour, 5 Auto Scan, Auto Pan
Speed Setup
Human-oriented focal length/ speed adaptation
Power up Action
Auto restore to previous PTZ and lens status
after power failure
Idle Motion
Activate Preset/Pan/Scan/Tour/Pattern if there is
no command in the specied period
Time Task
Auto activation of Preset/Pan/Scan/Tour/Pattern
by preset-time
Protocol
DH-SD, Pelco-P/D (Auto recognition)
General
Power Supply
DC24V 3A
Power Consumption
12W - 27W with heater on
Working Environment
-40-140F (-40 - 60C) <90% Humidity
Protection Level
IP66
QUESTIONS OR COMMENTS? CONTACT US
24/7 TECHNICAL RESOURCES,
KNOWLEDGE BASE AND MORE
www.Q-See.com/Support
Q-See is proud to back all of our products with a conditional service warranty
covering all hardware for 12 months from the date of purchase. Additionally, our
products also come with a free exchange policy that covers all manufacturing
defects for one month from the date of purchase. Permanent upgrading service is
provided for the software.
Liability Exclusions:
Any product malfunction or abnormalities in operation or damage caused by the
following reasons are not within the free service scope of our company:
1. Equipment damage caused by improper operation.
2. Improper equipment operation environment and conditions (e.g., improper
power, extreme environmental temperatures, humidity, lightning and sudden
surges of electricity).
3. Damage caused by acts of nature (e.g., earthquake, fire, etc).
4. Equipment damage caused by the maintenance of personnel not authorized
by Q-See.
5. Product sold over 12 months ago.
In order to fulfill the terms of your warranty, you must complete the registration
process after purchasing our product. To do this, simply fill out the User’s
Information Card on our website at www.Q-See.com
Q-SEE PRODUCT WARRANTY