Q-See QD6523ZH User manual - page 8
14
15
ADDITIONAL SETTINGS USING THE CAMERA’S ON-SCREEN MENU
The QD6532Z offers additional features that can be accessed through the DVR’s
PTZ menu, but which are actually programmed on the camera itself.
Accessing the Menu
The following instructions are shown using a QT-series DVR.
STEP 1. Right-click on your screen to open the Control Bar.
STEP 2. Click on the PTZ Control icon.
EXAMPLE 1: SETTING A CRUISE
This example is based on using a QT-Series DVR without an attached PTZ
keyboard. Your DVR’s specific commands may differ slightly. Please consult your
system’s manual.
STEP 1. In your DVR’s PTZ settings
window, select the Advanced tab
and then Preset 1.
STEP 2. Rotate the camera to the
desired position using the arrow
controls.
STEP 3. Click Save
STEP 4. Select Preset 2.
STEP 5. Rotate camera to desired
second location.
STEP 6. Click Save
You may repeat Steps 4-6 for additional
positions if desired.
STEP 7. While still in the Advanced
tab, click on the Setting button in
the Cruise column for Channel 1.
This will open a new window.
STEP 8. Click Add.
STEP 9. Double-click on the new
cruise setting to begin loading
your presets.
STEP 10. Click on the + button to
open the Preset pop-up window
and select your starting preset
point, speed and stop time.
Speed: 1-8 with 8 being the fastest
Serial Port
Serial Port
Advanced
Advanced
P.T.Z
P.T.Z
Default
Default
Setting
Setting
Setting
Setting
Setting
Setting
Setting
Setting
Setting
Setting
Setting
Setting
Setting
Setting
Setting
Setting
Setting
Setting
Setting
Setting
Setting
Setting
Setting
Setting
Setting
Setting
Setting
Setting
Setting
Setting
Setting
Setting
Setting
Setting
Setting
Setting
Setting
Setting
Setting
Setting
Setting
Setting
Setting
Setting
Setting
Setting
Setting
Setting
Apply
Apply
Exit
Exit
CH Preset
Cruise
Track
1
2
3
4
5
6
7
8
CH Preset
Cruise
Track
1
2
3
4
5
6
7
8
Save
Save
Zoom
Focus
Iris
Zoom
Focus
Iris
Speed: 5
Speed: 5
No.
No.
1
1
02
02
01
01
03
03
04
04
05
05
06
06
07
07
08
08
All
All
Start Track
Start Track
Start Auto Scan
Start Auto Scan
Start Cruise
Start Cruise
Preset
Cruise
Preset
Cruise
Speed: 5
Speed: 5
preset 101
preset 101
02
02
01
01
03
03
04
04
05
05
06
06
07
07
08
08
All
All
Zoom
Focus
Iris
Zoom
Focus
Iris
Time: This is the time the camera will stay pointed at this location.
STEP 11. Repeat for each preset - up to a maximum of 16 per cruise.
STEP 12. Click OK save your settings and close the windows until you reach
the
PTZ Settings window. Click Apply to save all of the settings.
STEP 13. Open the PTZ controls from the Control Bar, select your cruise in the
pull-down and click
to begin.
EXAMPLE 2: SETTING A TRACK
An alternate method is to utilize the Track settings - also found in the Advanced
tab. Click the Track button for the right channel, use the directional controls to point
the camera at your desired starting point and then click Start Record. The DVR
will then record your movements, including delays at selected spots. Click Stop
Record to end. Clicking on Start Track in the PTZ control window will start the
camera on its track.
Start Track
Start Track
Start Auto Scan
Start Auto Scan
Start Cruise
Start Cruise
Preset
Cruise
Preset
Cruise
Speed: 5
Speed: 5
preset 28
preset 28
02
02
01
01
03
03
04
04
05
05
06
06
07
07
08
08
All
All
Zoom
Focus
Iris
Zoom
Focus
Iris
c
a
b
d
STEP 3. Set the preset point (a)to 28 (95 may also be used)
STEP 4. Click the
to the right of the Preset pulldown
(b).
STEP 5. The on-screen menu will appear. You can navigate through it using the PTZ
directional controls
(c). Use the Iris + button (d) as “Enter” to make selections.
Use the right arrow in menus with multiple options.
SYSTEM SETTING
DISPLAY SETTING
CAMERA SETTING
FUNCTION SETTING
ALARM SETTING
EXIT
The Menus
When the On-Screen Display is activated, a menu with six options will be displayed.
The five menus all have submenus and other options. Most functions are self-
explanatory in nature. Selected features will be covered below.
SYSTEM INFORMATION
ADDR INFORMATION
SET NORTH
LANGUAGE: ENGLISH
FACTORY DEFAULT
RESTART
BACK
EXIT
Back will take you to the previous menu
while Exit will close out of the menu.
SYSTEM SETTING MENU
The first two selections show information
regarding the camera’s address, baud rate,
and etc. These cannot be changed. The
language cannot be changed as well.
North: Exit the menu, point the camera
north and return to the menu. Select Set
North. “OK” will briefly flash on screen to
indicate that North has been set.
Restart: This will restart the camera and
it will go through its start-up cycle but will
not clear user settings.
IMPORTANT! Preset 24 through 34 and 79 through 99 are reserved for
camera commands and cannot be used as preset points.