Q-See QH8013Z User Manual - page 10
18
19
DOME FUNCTION WINDOW
This menu lets you take the preset points created
in the previous menu and put them together into a
maximum of eight patrols with 16 points each. A
patrol, is the same thing as a cruise on the DVR.
CREATING A PATROL
STEP 1. Select Patrol Setup
STEP 2. Set the Patrol Number (option 1)
You may create up to 8.
STEP 3. Enter the Edit Current Patrol submenu
DOME FUNCTION
1 PATROL SETUP
2 TASK SETUP
3 TRACE SETUP
4 DAY NIGHT
5 DOME FUNCTION
6 NEW PASSWORD
7 CHANGE PASSWORD
0 RETURN
PATROL SETUP
1 PATROL NO: 1
2 EDIT CUR PATROL
3 RUN CUR PATROL...
4 DEL CUR PATROL
0 RETURN
FORMAT: PRENO/TIME
01: 001/005 02: 002/005
03: 003/005 04: 004/005
05: 005/005 06: 006/005
07: 007/005 08: 008/005
09: 009/005 10: 010/005
11: 011/005 12: 012/005
13: 013/005 14: 014/005
15: 015/005 16: 016/005
CALL 1 TO STORE
CALL 2 TO CANCEL
The 16 available preset points for your patrol
are arranged in two columns with the delay (in
seconds) for that point immediately to its right. You
can have the camera stay on a point between 5
and 240 seconds (4 minutes).
You can navigate between points using the left and
right arrow keys. Use the up and down arrow keys
to change the number values.
Clicking on the Iris + button in the DVR’s PTZ
Control window will increase a number value by
10. Clicking on the Iris - button will decrease the
value by 10.
If you wish to use less than 16 preset points in
your patrol, set the unused points to 000.
Start Track
Start Track
Start Auto Scan
Start Auto Scan
Start Cruise
Start Cruise
Preset
Cruise
Preset
Cruise
Speed: 5
Speed: 5
preset 101
preset 101
02
02
01
01
03
03
04
04
05
05
06
06
07
07
08
08
All
All
Zoom
Focus
Iris
Zoom
Focus
Iris
Run Current Patrol - This will run the selected
patrol until the camera is instructed to do
otherwise.
Delete Current Patrol - Deletes the selected
patrol.
TASK SETUP - You can designate up to eight
separate periods in a day and assign the camera
specific tanks for each period. If Tasks are en-
abled, the Home Position function (page 15) will
not operate.
CREATING A TASK
STEP 1. Set a start and end time using 24 hour
(military) time.
STEP 2. Choose a task: Random, Point to Point,
Preset Point, Patrol or Trace.
STEP 3. Select Patrol, etc. you want.
TASK SETTING
1 00:00-00:00 NONE: 00
2 00:00-00:00 NONE: 00
3 00:00-00:00 NONE: 00
4 00:00-00:00 NONE: 00
5 00:00-00:00 NONE: 00
6 00:00-00:00 NONE: 00
7 00:00-00:00 NONE: 00
8 00:00-00:00 NONE: 00
CALL 1 TO STORE
CALL 2 TO CANCEL
STEP 4. Select Preset 001 from the DVR’s pull down and click
to save this point. Or, select
Preset 002 and click
to exit out of the menu without saving changes.
ALARM SETUP - This is not functional in this camera. For an alarm-triggered action, please use
your DVR’s alarm settings to run a pattern, track or cruise that has been saved in the DVR’s PTZ
controls.
TRACE SETUP
This will create a path that the camera will follow, including horizontal and vertical positions along
with zoom and focus settings. This differs from the Patrol in that the camera will record your actions
and save it as a Trace. This is identical to the Track feature on QT-Series DVRs. Each Trace can last
up to 3 minutes. If that time is exceeded, the camera will save the trace up to that point and exit to
the
Trace Setup menu.
Start Track
Start Track
Start Auto Scan
Start Auto Scan
Start Cruise
Start Cruise
Preset
Cruise
Preset
Cruise
Speed: 5
Speed: 5
preset 101
preset 101
02
02
01
01
03
03
04
04
05
05
06
06
07
07
08
08
All
All
Zoom
Focus
Iris
Zoom
Focus
Iris
STEP 1. Set the trace number
STEP 2. Select Trace Setting
STEP 3. Click on the Iris - button to begin
recording.
STEP 4. Use the directional, zoom, function and
iris controls to create your trace.
STEP 5. When complete, select Preset 001 from
the DVR’s pull down and click
to
save your trace.
Trace Run- Select this to run your Trace.
DAY/NIGHT
This setting allows you to set what time the camera will operate in day (color) mode and night (black
and white) mode regardless of the light level. For this to be utilized, you must have set the date and
time in the System Setting menu (see page 15). Select Preset 001 from the DVR’s pull down and
click
to save your settings.