Qt series ip cameras quick start.
Thank you for choosing a q-see product! We are proud to back up our products with conditional service warranty covering all hardware for 24 months from the date of purchase. But, we are also here to help you get the most out of your system even if there aren’t any issues. Our self-help knowledge bas...
3 nvr poe block poe block nvr poe block poe block network network port poe router nvr poe block poe block poe router/ modem poe router/ modem network network port internet internet vga dc 48v dc 12v rs232 audio in video out picture 1 connecting and mounting cameras what makes internet protocol (ip) ...
4 nvr poe block poe block nvr poe block poe block network network port poe router nvr poe block poe block poe router/ modem poe router/ modem network network port internet internet picture 4 on your local network instead of running the cable directly between your camera and nvr, you can connect the ...
5 picture 8 picture 10 step 6. Select a camera or cameras from the list by checking the box to its left. Click refresh, if the camera you’re looking for does not appear. Step 7. Click ok to return to the device manager window. Step 8. The camera is still disabled. Select a camera and click on setup ...
6 nvr poe block poe block nvr poe block poe block network network port poe router nvr poe block poe block poe router/ modem poe router/ modem network network port internet internet picture 11 over the internet this allows you to connect to cameras in a completely different location. • you will need ...
7 confirming that ports are opened like your nvr, your cameras feature upnp technology that allows them to communicate with the network and through to the internet. Two “ports” (think of them as doorways through the firewall) are used; 85 and 6036. You will want to verify that these have been automa...
8 picture 16 picture 17 step 11. Check the box titled enable. Step 12. Enter the camera’s information: ip address: shown on canyouseeme.Org server port: 85 user name: admin password: 123456 step 13. Check the box titled enable and then click ok to return to the device manager window. Click apply to ...
9 camera placement when installing your camera, it is important to select a proper site not only for field of view, but for other considerations as well: distance from viewing/recording device. The further the camera is from the nvr or monitor, the higher the chances of signal degradation. The camer...
10 because your camera is weatherproof, it requires less protection than weather-resistant cameras and it can be placed in more exposed locations if needed. Keep in mind that most q-see qt ip cameras are designed to operate between -40°f to 122°f (-40°c to 50°) with a relative humidity of up to 95%)...
11 remote connection when not directly connected to an nvr, it can be directly accessed using a computer, mobile phone or tablet. The camera will need to be connected to the internet through a local network using a standard ethernet cable and its ip address must be obtained following the steps below...
12 this website will also display your public ip address near the top of the page above the box where you entered your port number. This is the number which you will use to access the camera using the nvr, a web browser or your mobile device from outside of your local network (away from the building...
