QMS 2425 Operation Manual - page 135
.DQML2SWLRQ.LW
3UREOHPV
7URXEOHVKRRWLQJ3ULQWHU3UREOHPV
([WHUQDO6&6,+DUG'LVN1RW2Q/LQH
If
DISK ONLINE
does not appear on the start-up or status page,
check the hard disk cable connections to the hard disk and to the
SCSI interface port on the back of the printer. (See your hard disk
documentation for more information.)
Is the hard disk turned on? Check that the Power indicator is on.
Did you turn on the hard disk before you turned on the printer.
Always turn the hard disk on first, and then turn the printer on.
Is the SCSI ID set for one of the reserved positions? Do not use
the reserved positions 7, 8, and 9. Make sure each device on the
SCSI chain has a unique address.
Did you terminate a hard disk in the middle of the chain? There
should be only one terminated disk in the chain, and it should
physically be the last disk in the chain. (See your hard disk
instructions for more information.)
.DQML2SWLRQ.LW3UREOHPV
Use the information in this section to locate and solve problems that
may arise when installing and using this Kanji SIMM or Kanji external
kit.
&DQW'RZQORDG.DQML)RQWV
Are you attempting to download Kanji TrueType fonts using the
PS Executive Series Utilities?
This utility cannot be used to download Kanji TrueType fonts. See
your Kanji TrueType font software documentation for information
on how to download these fonts.