QMS Magicolor 6100 Installation Manual
PDJLFRORU
®
9433
1
4;339830334
4;339830334
4;339830334
4;339830334$
Installation
Guide
This document provides quick installation information for the
magicolor
6100. For further information, refer to the
Operation
manual
(in hardcopy and CD).
$1 /RFDWLRQ 5HTXLUHPHQWV
»
Note:
Allow enough space around the printer to allow adequate ventilation
and easy servicing.
‹
Caution:
For best output quality and longest
consumables life, install the printer on a hard, flat,
level (within 1.5°) surface capable of supporting
about 119 lbs (54 kg).
%1 8QSDFNLQJ WKH 3ULQWHU
0
WARNING!
The printer
weighs about 119 lbs (54 kg). Don’t lift it by yourself.
ACHTUNG!
Der Drucker wiegt ca 54 kg; bitte versuchen Sie niemals, das Gerät alleine anzuheben oder zu tragen.
Unpack the printer by cutting the straps and lifting off the outer box.
»
Note:
Save the packing material for possible repacking.
Remove the protective plastic covering the printer.
With another person’s help, lift the printer from the base tray, and place it in its
permanent location.
When lifting and carrying the printer, use the carrying grips on the bottom sides.
Check the shipment contents; if any items are missing or damaged, contact your shipping company or your local vendor.
• Printer
• 250-sheet universal media cassette
• Envelope tray adapter
• Consumables starter kit (4 starter toner cartridges, OPC belt cartridge, fuser oil bottle, cleaning roller and oil removal syringe)
• Power cord
•
magicolor 6100 Installation Guide
(this handout)
, magicolor 6100 Operation
manual,
Connecting Your QMS Print System
manual
,
magicolor 6100 Documentation
CD-ROM and
QMS
Software
Utilities
CD-ROM
• Warranty and registration card
» Note:
Interface cables aren’t included in the shipment. If you need cables, contact your local vendor or computer store.
Use a properly grounded AC outlet with a line voltage of 100 V, 120 V, or 220–240 V, ±10%. The maximum electrical current required during operation is 13 amps
for a 100 V system, 11 amps for 120 V, and 6 amps for 220–240 V, and the recommended frequency is 50–60 Hz ±2 Hz for a 100 V system, 60 Hz ±2 Hz for a
120 V system, and 50 Hz ±2 Hz for a 220–240 V system.
»
Note:
Installation steps containing the
symbol are viewable as QuickTime video clips in the Adobe Acrobat PDF version of this guide found on the
magicolor 6100 Documentation CD-ROM.
015mati.eps
5; LQFKHV
5; LQFKHV
5; LQFKHV
5; LQFKHV
+:3 FP,
+:3 FP,
+:3 FP,
+:3 FP,
; LQFKHV
; LQFKHV
; LQFKHV
; LQFKHV
+53 FP,
+53 FP,
+53 FP,
+53 FP,
53 LQFKHV
53 LQFKHV
53 LQFKHV
53 LQFKHV
+83 FP,
+83 FP,
+83 FP,
+83 FP,
))))UUUUR
RRRQQQQW
WWW
1/ (1/ *1 PRGHOV
1/ (1/ *1 PRGHOV
1/ (1/ *1 PRGHOV
1/ (1/ *1 PRGHOV
7 LQFKHV
7 LQFKHV
7 LQFKHV
7 LQFKHV
+43 FP,
+43 FP,
+43 FP,
+43 FP,
015mati.eps
5; LQFKHV
5; LQFKHV
5; LQFKHV
5; LQFKHV
+:3 FP,
+:3 FP,
+:3 FP,
+:3 FP,
53 LQFKHV
53 LQFKHV
53 LQFKHV
53 LQFKHV
+83 FP,
+83 FP,
+83 FP,
+83 FP,
))))UUUUR
RRRQQQQW
WWW
'3 PRGHO
'3 PRGHO
'3 PRGHO
'3 PRGHO
7 LQFKHV
7 LQFKHV
7 LQFKHV
7 LQFKHV
+43 FP,
+43 FP,
+43 FP,
+43 FP,
5; LQFKHV
5; LQFKHV
5; LQFKHV
5; LQFKHV
+:3 FP,
+:3 FP,
+:3 FP,
+:3 FP,
1
&DUU\LQJ
&DUU\LQJ
&DUU\LQJ
&DUU\LQJ
*ULSV
*ULSV
*ULSV
*ULSV
2