QNAP QG-103N User Manual - Additional Information
106 |
2. Guest login is allowed by this QGenie. Admin can change this setting from "Settings."
Additional Information
Resetting
How can I use the RESET switch?
Press and hold (more than 3 seconds): The factory defaults are restored.
Reset will only be performed when QGenie is in Wi-Fi sharing mode.
Security setting for wireless LAN of this unit
Is the security setting necessary?
Setting security is extremely important when using devices equipped with the wireless
LAN function. If the security is not set, it is possible for this unit to be accessed from any
compatible device within the communication range.
To protect your data, be sure to set up the security.
What security settings are available for wireless LAN of this unit?
WEP, WPA, or WPA2 can be selected.
It is strongly recommended to use WPA2, since its security level is higher.
I have forgotten the password.
Press the RESET switch using a non-metal pointed object for over 3 seconds to restore
the factory defaults.
Reset will only be performed when QGenie is in Wi-Fi sharing mode.
System software update
About update of the system software of this unit
Distribution of the latest system software is on QNAP’s website. Check the update
status of the application periodically to make sure the latest version is being used.
“Qfile” will check the firmware version when connect to QGenie. It is recommended to
apply new updates when available.