QNAP QG-103N User Manual - page 78
78 |
Setup Wireless Security with Web Interface
1.
Login to the Web Interface using the Admin account.
2.
Select [Setting] from the navigation panel.
3.
Select [Security Type] in Wireless Security. For the best level of security, it is recommended to
use WPA2.
4.
After entering the password twice, select [Save] to apply new security settings.
NOTE
After change Wireless security, please reconnect to the QGenie by using the new password.
WPA/WPA2, the valid password length is between 8 ~ 63 characters long.
WEP, the valid password length is between 5 or 13 characters long.
Firmware upgrade with Web Interface
1.
Turn on QGenie. Connect the PC to QGenie’s Wireless LAN.
2.
Open browser and go to
http://192.168.60.1/.
Login to the Web Interface using the Admin
account.