QNAP QG-103N User Manual - page 99
99 |
The wireless LAN connection has stopped.
If this unit is connected to a computer with the USB cable, the wireless connection will
be stopped and USB connection will be established.
When changing from wireless LAN connection to USB connection, make sure that data
copy via wireless LAN is not in progress. If you change to USB connection while data
copy is in progress via wireless LAN, data may be damaged.
Phone / tablet need to use new settings after change device name or wireless security
settings of QGenie.
The wireless LAN connection between this unit and a
smartphone, tablet or computer is unstable.
Ambient conditions (obstacles between this unit and your device, electromagnetic
interference, wall materials, etc.) may adversely affect the wireless communication
range. Change the location of this unit, or move your device and this unit closer
together. If the problem is not resolved, restart the unit or press the RESET switch to set
the unit to the factory defaults (*).
Equipment that uses the 2.4 GHz frequency band, such as a microwave oven or
Bluetooth device, may be in use near this unit. Move such equipment away from this
unit, or turn the equipment off.
*Since all settings on this unit will be initialized, it is recommended that you take notes of
settings before restoring the factory defaults.
It takes a long time to establish a wireless LAN connection
between this unit and a smartphone, tablet or computer.
Ambient conditions (obstacles between this unit and your device, electromagnetic
interference, wall materials, etc.) may adversely affect the wireless communication
range. Change the location of this unit, or move your device and this unit closer
together. If the problem is not resolved, restart the unit or press the RESET switch to set
the unit to the factory defaults (*).
Equipment that uses the 2.4 GHz frequency band, such as a microwave oven or
Bluetooth device, may be in use near this unit. Move such equipment away from this
unit, or turn the equipment off.
*Since all settings on this unit will be initialized, it is recommended that you take notes of
settings before restoring the factory defaults.