QRS Music Technologies Petine Owner's Manual - Compactflash Source
P e t i n e
Owners Manual
Q R S M U S I C T E C H N O L O G I E S , I N C .
CompactFlash cards known to work in the Petine controller.
Sandisk CF
Sandisk Ultra II
Samsung Extreme Memory
Kingston
IBM Microdrive
Kodak
CompactFlash Source
Position the CompactFlash card, as shown on the right, and insert it into the reader.
Nothing will happen unless ScF is the selected source.
Tap the remote’s F1/Source button and then the number 3 button. 3cF displays.
See “Examples: How Source Content is Displayed”.
Insert the CompactFlash card into the reader.
Press the ADJ Dial twice, quickly, within one-half second to enter the Setup Menu.
Press the ADJ Dial once. The display dot will begin to flash.
Rotate the ADJ Dial until an “F” is displayed in the first display segment.
Press the ADJ Dial once to stop the dot from flashing.
Rotate the ADJ Dial clockwise to move the dot to the second segment.
Press the ADJ Dial once. The display dot will begin to flash.
Rotate the ADJ Dial to place the letter “F” in the second segment.
Press the ADJ Dial once to stop the dot from flashing.
Rotate the ADJ Dial clockwise to move the dot to the third segment.
Press the ADJ Dial once to execute the formatting procedure, then wait...
If formatting is successful “Scc” will display for a few seconds.
Press the ADJ Dial once.
Press the ADJ Dial twice, quickly, within one-half second to exit the Setup Menu.
Press the STOP button on the remote to stop any flashing dots on the display.
F
D
E
S
i N
0 2 5
F
d
e
F
D
E
F
D
E
F F E
F F E
F F E
s c c
F F E
0 2 5
Source
Display
File Extension
File Types Recognized
CompactFlash
ScF
3cF
mid
General MIDI
mp3
MP3 Audio Only
mpe
MP3 Pianomation with Audio
CompactFlash Card Reader
How to Format a CompactFlash Card
0 2 5
S
I n
P
AGE
17