QRS QRS-101 Operating Instructions Manual - The Mat Applicator M1
8
locations with the keys [1]-[4]. Any existing program on this memory location will
be overwritten.
Program the appliance as follows:
1. With the keys [ON/Program] select the desired therapy program: Basic, Vital or
Relax.
2. Select therapy duration with the key [TIME] for 1-30 minutes.
3. Select with the applicator key to choose the desired applicator: mat or pillow.
4. The signal tone can be switched on or off with the key [SOUND]
5. Finish programming with the setting for the field strength with the keys [1]-[10] or
the [SENSITIVE] key.
6. The settings are now memorized and the program will start. With the [STOP] key
the program can be stopped, while the settings remain memorized. To memorize
further programs repeat the above process.
To Call Up a Program from the Home Card
Push the card, into the control unit. A programmable QRS card is automatically
recognized by the switched-on control unit and the card type is displayed.
To call up a previously memorized therapy program press the key [MEMO]. The
display will show “LOAD [1..4]”. To repeat a memorized program press one of the keys
[1]-[4]. The program will now start and can be stopped at any time by pressing the key
[STOP].
The Mat Applicator M1
The Mat applicator generates a magnetic field of variable strength depending on the
settings 1 to 10 or Sensitive. At setting 1 the magnetic field strength is approx. 3 ìT,
climbing linearly. At setting 10 the magnetic field strength is up to 30 ìT. The magnetic
field is evenly distributed over the entire length and width of the mat.
For tall people – above 180cm – the head should be placed beyond the edge of the
mat, as the magnetic field is effective for about 0.30 metres beyond the mat and up to
1.2 metres up and down. The body is nestled into the magnetic field and evenly
stimulated.