QRS QRS-101 Operating Instructions Manual - Maintenance
13
Pillow Applicator
Do not immerse the pillow applicator in water! Clean with normal, mild household
cleaner, eg. Palmolive.
Be sure to keep sharp, pointed objects away from mat applicator or pillow applicator.
Do not expose the system to direct sunlight and protect it from frost.
Placing Mat under a Mattress
The mat can be placed under a mattress which is not thicker than 20 cm. In such case
the applicator should be set one level higher, e.g. level 2 instead of 1 etc. In the case of
inner spring mattresses the intensity should be set 2 levels higher. A woollen blanket
should be placed between the mattress and the mat in order to avoid undesirable
bacteria or fungi caused by sweat.
Maintenance
No special maintenance or inspection is necessary. Warranty claims can only be
guaranteed if the repairs are carried out by the manufacturer or authorised
specialist staff. Otherwise this warranty is void. The appliance is only to be used
for its intended purpose and only original spare parts are to be used.
The appliance is to be visually checked for obvious physical damage by the operator
(user) on a regular basis. If there is any type of damage do not use the appliance and
send it to the manufacturer for repairs immediately!
The appliance must not be opened; otherwise this warranty is void.
Fault Finding
If after switching on there are no lights on the display panel: Check the house fuse or
the power point.
If self testing shows a fault. Unplug the power for 30 seconds, then repeat the startup
process.
List of Appliances and Accessories
Description
Control unit
Order No. 5004
Mat Applicator M1
Order No. 5005
Pillow Applicator K1
Order No. 5090
Vinyl cover mat
Order No. 5020
Vinyl cover pillow
Order No. 5022