QRS QRS-101 Operating Instructions Manual - Appliance Operation
4
Appliance Operation
Program selection and program start
[ ]
= confirm key
“….”
= text on display
Before operating the appliance please ensure that it is supplied with power from the
mains adaptor provi ded.
1.
Put the mains adaptor in a wall socket and the connecting plug into the socket
marked 6V on the back of your QRS appliance.
2.
Now connect one or two applicators to the sockets Appl 1 and/or Appl 2. If only
one applicator is to be connected, please use socket Appl 1
(standard socket).
3.
Switch the system on by pressing the key [ON/Program].
4.
Text appears on the illuminated display
“QRSHome 101”
5.
This is followed by an automatic appliance test of all system functions.
6.
The display shows
“SYSTEM CHECK”
7.
In case of serious errors the appliance signals an error code and switches itself
off. The appliance also tests the presence of the applicators and shows if one
or both applicators are missing or faulty.
8.
Proper function displays
“System OK”
9.
The following display appears
“Please select”
The appliance is operational and is waiting for input.