QTX Light DM-X10 User Manual - page 10
Action :
2)
Press the
AUTO DEL button repeatedly until the
AUTO LED turns on.
1)
Use
BANK UP/DOWN buttons to change Program
banks if necessary.
3)
Adjust the
PROGRAM speed via the SPEED fader
and the loop rate via the
FADE TIME fader.
Notes :
Deselect Blackout if LED is lit.
3.3.3 RUNNING A PROGRAM
Action :
2)
Use
BANK UP/DOWN buttons to change Program
banks if necessary.
1) Press and hold the PROGRAM button until the
LED blinks.
3)
Select the desired fixture via the
FIXTURES button.
Notes :
Deselect Blackout if LED is lit.
4)
Adjust and change fixture attributes using the channel
faders and wheel.
6)
Select the desired
SCENES button to save.
4)
Alternatively you can tap the
TAP DISPLAY button
twice. The time between two taps sets the time
between SCENES (up to 10 minutes).
Also called a Tap-Sync.
3.3.4 CHECK PROGRAM
Action :
2)
Use the
BANK UP/DOWN buttons to select
the
PROGRAM bank to review.
1)
Press and hold the
PROGRAM button until the
LED blinks.
3)
Press the
SCENES buttons to review each
scene individually.
Notes :
3.3.5 EDITING A PROGRAM
S
cenes will need to be modified manually.
5)
Press the
REC button to prepare the save.
Action :
2)
Use
BANK UP/DOWN buttons to select the
PROGRAM bank you will copy.
1) Press and hold the PROGRAM button until the
LED blinks.
3)
Press the
REC button to prepare the copy.
Notes :
All 8 scenes in a Program bank will be copied.
4)
Use
BANK UP/DOWN buttons to select the
destination
PROGRAM bank.
3.3.6 COPY A PROGRAM
5)
Press the
MUSIC BANK COPY button to execute
the copy. All LEDs on the controller will blink.
9
DMX 512 CONT R OLLE R S E R IE S
U S E R M A N U A L