QTX Light DM-X10 User Manual - page 13
3.4.9
DELETE ALL CHASE PROGRAMS
Action :
2)
Press the desired
CHASE button.
1) Press and hold the PROGRAM button to enter
programming mode.
Notes :
I
.e. To insert a scene between Steps 05 and 06
navigate using BANK buttons until the display reads
STEP05.
Action :
2)
Press and hold the
BANK DOWN button and the
AUTO DEL button while turning ON the controller.
1)
Turn OFF controller.
3)
All LEDs will blink.
Notes :
3.5
Scene Programming (Steps)
Action :
2)
Select the
BANK that contains the scene to be
copied using the
BANK UP/DOWN buttons.
1) Press and hold the PROGRAM button to enter
programming mode.
3)
Press the
SCENE button that corresponds
to the scene to be copied.
Notes :
3.5.2
COPY A SCENE
5)
Select the destination
BANK that contains the scene
memory to record onto using the
BANK UP/DOWN
buttons.
3)
Press the
TAP DISPLAY to switch the LCD display
to steps view.
4)
Use the
BANK UP/DOWN buttons to navigate steps
and locate the insert point of the new scene.
The display will read the step number.
5)
Press
REC button to prepare the insert.
6)
Use the
BANK UP/DOWN button to locate the SCENE.
7)
Press the
SCENE button that corresponds to the scene
to be inserted.
8)
Press
REC button to insert the scene. All LEDs
will blink.
4)
Press
REC button to copy the scene.
CAUTION! This procedure will result in irrevocable loss of chase step memory. The individual scenes
and program banks will be preserved.
3.5.1 INSERT A SCENE
6)
Press the desired
SCENE button to complete copy.
All LEDs will blink.
12
DMX 512 CONT R OLLE R S E R IE S
U S E R M A N U A L