Audio micro system user manual english mc-100 please read this user manual carefully to ensure proper use of this product and keep this manual for further reference..
English warnings ................................................................................................................... 1 precautions ............................................................................................................... 2 introduction .............................
- 1 - do not use the machine either voltage is not correspond with notified voltage on the rating plate. If voltage is not correct, it is possibility of the unit damage or risk of fire. English.
- 2 - leave space for ventilation, 5cm at least, though the machine does not produce too much heat. And the following places are not suggested as a proper location: • unstable surfaces, damp and dirty places • places exposed to heat sources or sunlight; the device culd not be placed closed to the op...
- 3 - english preparation for use unpacking and setup * carefully remove the unit from the display carton and remove all packing material from the unit itself. * remove any descriptive labels that may be found on either the front or top cabinet of the unit. Do not remove any labels located on either...
- 4 - front panel and connections english 13. Ac socket 14. Fm antenna 15. Aux jack 16.Phones jack 17. Volume+ button 18.Volume- button 19.Pre-dn/-10 button 20.Pre-up/+10 button 21.Battery door 1. Sd jack 2.Function select 3. Play/pause/time button 4. Usb jack 5. Standby 6. Eq 7. Repeat/memory 8. Le...
Standby mode after the unit is connected to the power source or the battery is inserted, it is in standby mode; the clock is shown on the display. Press standby button to switch it on from the standby mode; the radio mode will be activated. In the standby mode only clock function is available clock ...
- 6 - radio operation usb/sd operation english press function button to enable the radio mode. Press and hold play/pause/time button; the unit will automatically scan the frequency range and save all available stations in the memory (up to 30). When the automatic search will be completed, the unit w...
- 7 - aux jack aux play you can connect the audio output of an external device to this unit, to listen to the sound of that device through the speakers of this unit. To connect an external audio device, please use a standard audio cable with 3.5-mm- to-3.5mm plugs(not included) to connect the headph...
Should the system exhibit a problem, check the following before seeking service. - 8 - troubleshooting possible cause volume not adjusted power cord not securely connected batteries dead/ incorrectly inserted electrostatic discharge symptom no sound / power display does not function properly. No rea...
- 9 - technical specifications general power requirement ................................................................ Ac: 220-240v~50hz power consumption ......................................................................... Ac 13.5 watts battery power supply.....................................
Www.Quadro-electronics.Com.
