Qualitel Eurofone 210 User Manual - Eurofone 210
Register new handsets
Accessory handsets must be registered to the base station.
The base station must be set for registration mode (Declaration).
•
Press on the base station for approx. 5 seconds before declaration,
then release the key.
•
The base is now in registration mode.
•
Press on the handset you wish to register, select Registration
and press OK.
•
Enter the system pin number (Default Pin = 0000) Press OK.
•
If the registration is successful you will hear a confirmation signal and
the handset displays handset xx (xx the allocated Handset number).
Conversation with several call partners
During a call you can make a second internal call (enquiry call), switch
between call partners (brokering) or simultaneously converse (3-way confer-
ence call) without the need for two telephone lines.
Internal conversation / Internal call
•
Press . The registered handset numbers will display.
•
Enter the desired handset number to intercom with.
If you receive an external call while you are on the phone to an internal call
partner, you will hear an incoming call alert. End the internal call by pressing
the End call key. Press the Talk key. You are connected to the external party.
Call transfer to another handset
You are conducting an external call and you want to transfer it to another
handset.
•
Press , select Intercom, Press , enter the desired handset
number of the internal party.
Eurofone 210
13