Qualitel Eurofone 210 User Manual - Handset Settings
•
Press the End call key to transfer the call to the other handset.
Conference
You are conducting an external call.
•
Press , select Intercom, Press OK, select the desired handset
number of the internal party.
•
Press the Star key for approx. 3 sec. when the internal party responds.
The three call partners are connected.
•
Any teleconference partner can press the End call key to leave the
conference and end the call.
Handset settings
•
Press , select HS Settings and press OK.
•
Select a function from the following list:
-Alarm– The activated alarm is displayed in standby mode by .
The alarm sounds for 30 seconds or can be deactivated
immediately by pressing any key. The volume is the same as for
the ringtone.
- Ring Setup– Select the desired ringer melody for internal
and external calls.
- Tone Setup– Activate or deactivate the following options:
Key Tone– Every time a key is pressed, a brief beep is heard.
Battery Tone– The batteries are almost empty. Insert the
handset in the base station for charging.
Out of Range– A warning beep is sounded if you exceed
the maximum range.
-Language– Choose the language for the display texts.
-Rename HS– To better distinguish between handsets, you can
give each hand-set a name.
-HS display– Select time or handset name for idle mode
display.
-Auto Answer– Just pick up the handset from the base to
answer a call (without pressing any key).
Eurofone 210
14