Summary of QT6131
Page 1
1.
Page 2
2 introduction thank you for purchasing a qualitel product which adopts excellent workmanship and exceptional reliability. Your telephone is designed to give you flexibility in use and high quality performance. To get the most from your new telephone, we suggest that you take a few minutes to read t...
Page 3
3 do not disturb function alarm clock 5 digit area code filtering 6 digit long distance code available adjustable lcd contrast pre-dialing and edit function baby call function flash time selectable (100、300、600 and 1000ms) mute function pause function music on hold flash and ...
Page 4
4 location description.
Page 5
5 installation 1. Plug one end of the line cord into the connector marked “line” on the base of the telephone and the other end into the wall socket. 2. Plug one end of the curly cord into the handset and the other end into the handset connector on the side of the telephone base. 3. Select your pref...
Page 6
6 1. Slide out the parking hook as indicated. Turn it around and slide back into position again. Place the handset on the cradle with the parking hook on the cradle arranged to fit into the parking recess under the earpiece on the handset. Answering a call from the handset 1. When the telephone ring...
Page 7
7 pre-dialing function 1. Without lifting the handset, dial the desired number using the numerical dial pad. 2. If a digit was entered incorrectly, use the del key to delete the digit. 3. Press the key or pick up the handset for the number to be dialed automatically. Redial 1. Pick up the handset or...
Page 8
8 date/time setting 1. In on-hook state, press the menu key then press the up key four times, the lcd will display date/time. 2. Press the menu key, the year digits will flash. Use the up or down key to change the year, then press menu to confirm and advance to month setting. 3. Repeat the above p...
Page 9
9 2. Press the menu key, then enter the telephone number by means of the dial pad alphanumerical keys and confirm by pressing the menu key. 3. Enter the name by means of the dial pad alphanumerical keys and up or down key to move the cursor and del to correct. 4. Press the menu key to confirm and ad...
Page 10
10 displayed when the caller prefers their number to be withheld. “out of area” indicates the call was placed from an area where caller id service is not supplied. “error” represents an incorrect incoming signal. If there i s no caller‟s name in the caller id signal but your phone book contains the ...
Page 11
11 deleting display the desired phonebook entry, press the del key, the lcd prompts del?, press the del key again to confirm the deletion. One-touch memory store a number in on-hook state, enter the telephone number to be stored via the dial pad or review a caller ‟s number, then press the mem k...
Page 12
12 5. Follow the same procedure to set the hour and minute of end time and press the menu key to confirm, the filter icon is displayed on the lcd. Note: during the dnd mode the incoming caller identification will be displayed on the lcd but the ringer will be deactivated. To cancel dnd mode, press a...
Page 13
13 pause function when dialing, press the redial/p button to insert a 3.6s pause time between digits. This function is used behind a pabx. Insert the pause between the pabx access digit (usually 0 or 9) and the number to be dialed. Use this function when you want to redial a number or when you store...
Page 14
14 phone does not ring * check the phone line cord * could have too many phones on one line (the total ren of all phones should not be greater than the maximum for your area, usually 5). * check if the ringing volume is set to the desired volume. Last number redial and/ * when you first make a call ...