Qualitel QT6131 Instruction Manual - page 11
11
Deleting
Display the desired phonebook entry, press the DEL key, the LCD prompts DEL?, press the DEL key again
to confirm the deletion.
ONE-TOUCH MEMORY
Store a number
In on-hook state, enter the telephone number to be stored via the dial pad or review a caller
‟s number, then
press the MEM key followed by the M1 or M2 key. The number is now stored under the selected one touch
memory key (M1/M2).
Review and dialing of the stored number
In on-hook state, press the Mi (i=1~2) key to review the stored number, then pick up the handset or press the
key or REDIAL key to call the number.
In off-hook state, press the Mi (i=1~2) key to call the stored number.
Deleting
In on-hook state, press the Mi (i=1~2) key to display the stored number, then press the DEL key twice to
delete the stored number.
TWO-TOUCH MEMORY
Store a number
In on-hook state enter the number to be stored via the dial pad or review a caller
‟s number, then press the
MEM key and one of the numerical keys on the dial pad (0-9), the number is then stored under the chosen
numerical key of the dial pad.
Display and dialing
In on-hook state, press the MEM key followed by the numerical key (0~9) on the dial pad where the number
was stored. The number is displayed on the LCD, then pick up the handset or press the
key or the
REDIAL key to dial the stored number.
In off-hook state, press the MEM key and one of the numerical keys 0~9. The number is dialled.
Deleting
In on-hook state, press the MEM key and one of the numerical keys 0~9, the stored number is displayed, then
press the DEL key twice to delete the stored number.
FILTER SETTING (DO NOT DISTURB FUNCTION)
The telephone can be set to the DND (Do Not Disturb) mode. The telephone will not ring upon receipt of an
incoming call.
1. In on-hook state, press and hold the MUTE key for 3 seconds, the LCD displays FILTER START
indicating the start time of the DND period.
2. Press the UP or DOWN key to set the hour and press MENU to confirm.
3. Press the UP or DOWN key to set the minute and press MENU to confirm.
4. The LCD displays FILTER STOP to remind you to set the end time of the DND period.