Qualitel QT6131 Instruction Manual - page 9
9
2. Press the MENU key, then enter the telephone number by means of the dial pad alphanumerical keys
and confirm by pressing the MENU key.
3. Enter the name by means of the dial pad alphanumerical keys and UP or DOWN key to move the cursor
and DEL to correct.
4. Press the MENU key to confirm and advance onto the next entry.
Note: EXAMPLE
– To enter the name “JOHN”, press the numerical key 5 once, then the numerical key 6
three times, then the numerical key 4 two times followed by the numerical key 6 two times. Correct mistakes
using the UP/DOWN and DEL.
The alphabet on the dial pad keys are arranged as follows:
1
2 ABC
3 DEF
4 GHI
5 JKL
6 MNO
7 PQRS
8 TUV
9 WXYZ
Note1
– Copying incoming calls to the phonebook: Press the UP or DOWN keys to review an incoming
call, then press the BOOK key twice to copy the incoming call (number & name) to the phonebook memory
directly; or press the MEM then BOOK key, edit the number, then press the MEM key again to enter the name,
use the alphanumeric keys to edit the name with the help of the DEL key for deleting, and MEM key for
confirming.
Note2
– Refer to the section “REVIEWING, DIALING OUT AND DELETING PHONEBOOK ITEMS” to
access these operations.
Editing a phone book entry
In on-hook state, press the MENU key then press the UP keynine times, the LCD will display PHONEBOOK
EDIT, press the MENU key then INPUT PREFIX is displayed, enter the first character of the name you wish to
edit, the LCD will display the first name entry of the character that was entered, press the UP key to view
more names starting with the same character. The rest of the editing process is the same as adding a new
entry. You can also press the UP or DOWN key to scroll through the phone book entries one by one without
entering the first name character.
Flash time setting
1. In on-hook state, press the the MENU key then press the UP keyten times, the LCD will display FLASH
TIME.
2. Press the MENU key and the default setting of 100ms flashes on the LCD.
3. Press the UP or DOWN key to select a flash time of 100、300、600 or 1000ms, and press the MENU key
to confirm.
FEATURES AND OPERATIONS DESCRIPTION
REVIEWING, CALLING BACK AND DELETING INCOMING CALLS
Caller ID message
Upon receipt of an incoming call (if you have an active caller ID subscription), the unit will display the phone
number together with the following information
: caller‟s name, calling date & time, and a serial number. A new
number will carry a
“NEW” icon, and a repeated number will carry a “REP” icon. “PRIVATE CALL” will be