Quest Engineering HPI 110 User Manual - page 11
HPi
110 &
HPi
210
Quick Rig (QR) Systems
User Manual
HPi110 & HPi210 Quick Rig (QR) Systems
9
QR2 Assembled Kit
(shown with the i-Spine)
HPi110 with the
QR2 Kit
Installation Spine
The installation Spine (i-Spine) offers a more elegant solution for permanent installations . The row
of holes at the rear of the spine allows for vertical tilt when wall-mounted .
The i-Spine comes with an M8x50 custom Quick Pin (Q-Pin) as well as a pair of long M10 counter
sunk screws .
The kit QR1 (standard kit for fixed wall mounting installations) comes complete and assembled,
with the right screws and bolts to install a single HPi110 .
Kit QR2: Fixed Wall Mounting Tilt and Pan
Name & Reference
Application
In the Kit
Order Ref: ACHPiQR2
• 1 speaker
• Wall Mounting
• Tilt (0-30˚)
• Full Pan (-/+ 75˚)
• Wall-Mount assembly (swivelling)
• i-Spine
• Quick pin 8x50
• Screws (2x M10)
Ordering reference:
ACHPiEX2
Option Note for QR-2
(Available as a separate component)
• Take the medium side plates off the
assembly by removing the bolts .
• Use the same bolts, washers and
nuts for the long plates (all bolts,
washers and nuts should be re-used)
• Long side plates can be ordered
for adding ‘x’ of additional distance
from the wall . (sold separately)